CUVETTES
                                          
 All Cuvettes for your test                         

 
Standard Cuvettes with lid
Standard Cuvettes with telflon stopper

Semi-Micro cell with black walls and with lid

Semi-Micro cell with black walls and telflon stopper

 

 
Micro cell with black walls and with lid
Micro cell with black walls and telflon stopper
Self masking continuous flowthrough cell
Self masking continuous flowthrough cell

 

Cylindrical cell
Cylindrical cell one stopper
 

Standard cell with lid and with round bottom

Standard cell with telfron stopper and with round bottom

 

Standard cell with telfron stopper and with round bottom
Micro cell with black walls and with lid
 

Micro cell with black walls and with lid

Semi-Micro cell with black walls and with lid

 

Self masking continuous flowthrough cell
Standard fluorometer cell with lid
 

Standard fluorometer cell with telfron stopper

Micro cell with frosted walls and with lid

 

Micro cell with frosted walls and with lid
Micro cell with frosted walls and with lid

Semi-Micro cell with frosted walls and with lid

Semi-Micro cell with frosted walls and with lid

 

Micro cell with frosted walls and with telflon stopper
Semi-Micro cell with frosted walls and with telflon stopper

Large cell

Micro cell with frosted walls and with teflon stopper

 

Micro cell with frosted walls and with telflon stopper
Semi-Micro cell with frosted walls and with telflon stopper

Standard cell with lid and lever bottom

Micro cell with balck walls and with lid

 

Micro cell with frosted walls and with lid
Micro fluorometer cell

Standard cell with lid and lever bottom

Micro fluorometer cell with telflon stopper

 

Self masking continuous flowthrough cell
Self masking continuous flowthrough cell

Micro cell with black walls

Micro cell with black walls

 

Micro cell with black walls
Absorptiometer rectangular

Rectangular with graded seal

Fluorimeter rectangular with graded seal

 

Long outlet cylindrical
Cells for reflection measurements

Rectangular with screw cap

Large cell
 
Automated System Syringe Filters can replace Whatman brand                                          
Features:
1. Automated System Compatible: Designed to be fully compatible and reliable for use with the SOTAX and Zymarku automated test systems.
2. HPLC certified: The syringe filters with hydrophilic PTFE membrane to below in UV absorbing extractables. They have been tested for compatibility with common HPLC solvents (water, acetonitrile, and methanol) using established HPLC procedures. There is no interference peak at either 214 or 254nm.
3. Safety: High pressure resistance design avoiding bursting during use Reliable and smooth delivery of filters, can resist ≥0.7Mpa pressure.
4. Operation Stability: The syringe filter meet the stringent requirements for automated dispensing, robotic handling and fit and operation in the SOTAX dissolution systems. And are fully compatible for use with SOTAX and Zymark automated workstations and facilitate smooth operation and worry-free performance 24 hours a day.
Specifications:
1. Typical Filter Media: hydrophilic PTFE Glass Fiber
2. Housing: PP
3. Dimension: 25mm
4. Pore Size: 0.22um; 0.45um; 0.8um; 1um
5. Sealing Technology: Ultrasonic welding
6. Filtration Area: 5.3cm2
7. Inlet/Outlet Connections: FLL inlet, modified MLS outlet
8. Max. Operation Temperature: 60℃/140℉
9. Max. Operation Pressure: 7bar@23℃

Size Material Pore Size Hold up volume (after emptying) Typical flow rate (ml/min) @0.093MPa Typical B.P data (MPa)
25mm Hydrophilic PTFE 0.22um <125 100 ≥0.13 (ethyl alcohol)
25mm Hydrophilic PTFE 0.45um <125 200 ≥0.09 (ethyl alcohol)
25mm GF 1.0um <125 370 ≥0.28 (water)
25mm GF+PTFE 0.22/1.0um <125 100 ≥0.13 (ethyl alcohol)
25mm GF+PTFE 0.45/1.0um <125 200 ≥0.09 (ethyl alcohol)

Ordering Information

Filter Media Diameter Pore Size Connections Qty/Pk Part No.
Hydophilc PTFE 25mm 0.22um FLL/MLS 50/PK AMAS02225
25mm 0.45um FLL/MLS 50/PK AMAS04525
GF 25mm 1.0um FLL/MLS 50/PK AMAS10025
GF Prefilter/Hydrophilic PTFE 25mm 0.22um FLL/MLS 50/PK AMAS12225
25mm 0.45um FLL/MLS 50/PK AMAS14525
 
Syringe Filters                                           
1. Nylon Syringe Filters

Description:
Hydrophilic surface, good solvent resistance and medium protein binding
● Filtration of all aqueous samples and most of organic solvents
● Mechanical stability is very strong
● Excellent chemical compatibility with esters, bases, phenol and alcohols
● Autoclave: sterilized by dry heat at 121°C for 15 minutes
Specifications
Pore Size
Bubble Point(psi)
0.22μm
46
0.45μm
29
Property

Diameter (mm)

4
13
25
30
Filter Area(cm2)
0.1
0.65
3.9
4.5
Burst Pressure (psi)
75
100
100
100
Retain Volume (μl)
8
30
120
140
Sample Volume (ml)
2
6
70
90
Housing Material Polypropylene
Connector (inlet/outlet) Female Luer Lock/Male Luer Silp
Ordering information
Size Pore Size QTY. Part No. Sterile
13mm 0.22μm 100/pk AMN02213 AMN02213S
0.45μm 100/pk AMN04513 AMN04513S
25mm 0.22μm 100/pk AMN02225 AMN02225S
0.45μm 100/pk AMN04525 AMN04525S
33mm 0.22μm 100/pk AMN02233 AMN02233S
0.45μm 100/pk AMN04533 AMN04533S
 
2. PTFE Syringe Filters (Hydrophobic & Hydrophilic)
Description
● Highest solvent resistance, and high protein binding
● Filtration of non-aqueous or solvent based samples
● Pre-wetting with methanol or ethanol prior to aqueous samples filtration
● Very broad chemical and thermal compatibility
● It is recommended for strong acids and bases
● Good for filtering and degassing chromatography

Specifications

Pore Size
Bubble Point(psi)

Color Code

0.22μm
14
Purple
0.45μm
8
Orange

Property

Diameter (mm)

4
13
25
30
Filter Area(cm2)
0.1
0.65
3.9
4.5
Burst Pressure (psi)
75
100
100
100
Retain Volume (μl)
8
30
120
140
Sample Volume (ml)
2
6
70
90
Housing Material Polypropylene
Connector (inlet/outlet) Female Luer Lock/Male Luer Silp
Ordering information
Size Pore Size Part No. QTY.
Hydrophobic Hydrophilic
13mm 0.22μm AMPT02213 AMPT02213Q 100pcs/pk
0.45μm AMPT02213 AMPT02213Q
25mm 0.22μm AMPT02225 AMPT02225Q
0.45μm AMPT04525 AMPT04525Q
33mm 0.22μm  AMPT02233  AMPT02233Q
0.45μm AMPT04533 AMPT04533Q
 
3. PVDF Syringe Filters (Hydrophobic)
Description
Hydrophilic membrane
● It has a broad chemical compatibility and is low UV absorbing extractables
● It is highly resistant to most solvents and low protein binding.
● General filtration of biological samples
● Filtration of all aqueous and most solvent based samples
● Aseptic filtration for protein, tissue culture medium, antibiotic and ethanol
● Autoclave: sterilized by dry heat at 121°C for 15 minutes

Specifications

Pore Size
Bubble Point (psi)

Color Code

0.22μm
49
Coffee
0.45μm
22
Red

Property

Diameter (mm)

4
13
25
30
Filter Area(cm2)
0.1
0.65
3.9
4.5
Burst Pressure (psi)
75
100
100
100
Retain Volume (μl)
8
30
120
140
Sample Volume (ml)
2
6
70
90
Housing Material Polypropylene
Connector (inlet/outlet) Female Luer Lock/Male Luer Silp

Ordering information

Size Pore Size Part No. QTY.
13mm 0.22μm AMPV02213 100pcs/pk
0.45μm AMPV04513
25mm 0.22μm AMPV02225
0.45μm AMPV04525
33mm 0.22μm  AMPV02233
0.45μm AMPV04533
 
4. PES Syringe Filters

Description
● Natural hydrophilic, low protein binding
● Ideal for aqueous based samples
● Fast flow rate and high throughout
● General filtration of biological samples
● Autoclave: sterilized by dry heat at 121
°C for 15 minutes

Specifications

Pore Size
Bubble Point (psi)

Color Code

0.22μm
35
White
0.45μm
24
Azury

Property

Diameter (mm)

4
13
25
30
Filter Area(cm2)
0.1
0.65
3.9
4.5
Burst Pressure (psi)
75
100
100
100
Retain Volume (μl)
8
30
120
140
Sample Volume (ml)
2
6
70
90
Housing Material Polypropylene
Connector (inlet/outlet) Female Luer Lock/Male Luer Silp

Ordering information

Size Pore Size Part No. QTY.
13mm 0.22μm AMPE02213 100pcs/pk
0.45μm AMPE04513
25mm 0.22μm AMPE02225
0.45μm AMPE04525
33mm 0.22μm  AMPE02233
0.45μm AMPE04533
 
5. MCE Syringe Filters
Description
● Better hydrophilicity, very low protein binding
● Great water flux and better cutoff effect
● Ideal for aqueous based samples, tissue culture and sensitive biological samples
● Has a lower chemical resistance
● Autoclave: sterilized by dry heat at 121
°C for 15 minutes

Specifications

Pore Size
Bubble Point(psi)

Color Code

0.22μm
37
Green
0.45μm
22
Blue
Property Diameter (mm)
4
13
25
30
Filter Area(cm2)
0.1
0.65
3.9
4.5
Burst Pressure (psi)
75
100
100
100
Retain Volume (μl)
8
30
120
140
Sample Volume (ml)
2
6
70
90
Housing Material Polypropylene
Connector (inlet/outlet) Female Luer Lock/Male Luer Silp

Ordering information

Size Pore Size Part No. QTY.
13mm 0.22μm AMMC02213 100pcs/pk
0.45μm AMMC04513
25mm 0.22μm AMMC02225
0.45μm AMMC04525
33mm 0.22μm  AMMC02233
0.45μm AMMC04533
 
6. PP Syringe Filters
Description
● It is hydrophobic, high solvent resistant, lower protein binding
● Good thermal compatibility
● General filtration of biological samples, solvents, deionized water and reducing biological load
● Filtration of all aqueous and most solvent based samples
● Autoclave: sterilized by dry heat at 121
°C for 15 minutes

Specifications

Pore Size
Bubble Point(psi)

Color Code

0.22μm
35
Blue
0.45μm
24
Black
Property Diameter (mm)
4
13
25
30
Filter Area(cm2)
0.1
0.65
3.9
4.5
Burst Pressure (psi)
75
100
100
100
Retain Volume (μl)
8
30
120
140
Sample Volume (ml)
2
6
70
90
Housing Material Polypropylene
Connector (inlet/outlet) Female Luer Lock/Male Luer Silp

Ordering information

Size Pore Size Part No. QTY.
13mm 0.22μm AMPP02213 100pcs/pk
0.45μm AMPP04513
25mm 0.22μm AMPP02225
0.45μm AMPP04525
33mm 0.22μm  AMPP02233
0.45μm AMPP04533
                       
Membrane Filters                                           

1. MCE Membrane Filters

Product Description
Mixed cellulose ester (MCE) membrane filters are composed of cellulose acetate and cellulose nitrate. It’s one of the most widely used membranes in analytical and research applications because of its biological inertness.
Application
●High porosity for increased flow rates without compromising filter integrity.
●High protein binding can be blocked by pretreatment or utilized in applications.
●Use for many standard laboratory applications, including, contamination analysis.
●Use with aqueous samples. Don’t use with organic solvents
Ordering information
Diameter Pore Size Part No. QTY.
47mm 0.22μm AMMC02247R 100pcs/pk
0.47μm AMMC04547R
 

2. Nylon Membrane Filters

Product Description
Nylon membrane filter is a supported, naturally hydrophilic membrane .Nylon membrane filters are flexible, durable and tear resistant, and can be autoclaved at 121°C.
Application
●High strength and heat resistance.
●Use for HPLC sample preparation, to sterilize biological solutions or buffers, or for vacuum degassing.
●Compatible with many aqueous, alcohols solvents, bases, most HPLC solvents, aromatic hydrocarbons and THF.
●Don’t use with acids, aggressive halogenated hydrocarbons, protein samples.
Ordering information
Diameter Pore Size Part No. QTY.
47mm 0.22μm AMN02247R 100pcs/pk
0.47μm AMN04547R
 

3. PTFE Membrane Filters

Product Description
Polytetrafluoroethylene (PTFE) membrane discs are used for a variety of filtration applications, including biochemistry, microelectronic, lab material and etc. It can effectively filtrate microorganism and other particulates .PTFE also has high temperature resistance and wide chemical compatibility.
Application
Hydrophobic PTFE Membrane Filters
●Highly porous membrane filter.
●Use to sterilize gasses, vent gas from aqueous solutions, or sterilize or clarify aggressive chemicals.
●Insert to most aggressive solvents, strong acids, alcohols, bases, aromatics.
●Don’t use with aqueous samples without pre-wetting (causes high backpressure).
Ordering information
Diameter
Pore Size
QTY.
Part No.

Hydrophobic

Hydrophilic

47mm
0.22μm
   100/pk
   AMPT02247R
AMPT02247RQ
0.45μm
   100/pk
  AMPT04547R
AMPT04547RQ

 

 

 

4. PVDF Membrane Filters (Hydrophobic)

Product Description
PVDF (polyvinylidene difluoride) is conventional, hydrophobic and micro porous membrane. It has a low critical surface energy and will not be wet with aqueous fluids. It has a broad chemical compatability and is low UV absorbing extractables. It can ensure wet air and other gas pass through smoothly, even when the differential pressure is very low.
Application
● High temperature capabilities, excellent ageing resistance and High purity fluid transportation.
●Easy processing by extrusion, injection, compression, blow molding, solution process.
●Use with alcohols, weak acids, proteins, peptides and other biomolecules.
●Don’t use with some strong acids, bases, esters, ethers or ketones.
Ordering information
Diameter
Pore Size
QTY.
Part No.
47mm
0.22μm
   100/pk
  AMPV02247R
0.45μm
   100/pk
  AMPV04547R

 

 

 

5. PES Membrane Filters

Product Description
PES (Polyethersulfone) membrane is hydrophilic and constructed from polyethersulfone polymer membrane. It has a good flow rate characteristics and its low protein and drug binding characteristics make it ideally suited for use in life science applications.
Application
●Liquid of high temperature filtration.
●Use with aqueous samples, proteins, acids, alcohols, aliphatic hydrocarbon.
●Don’t use with concentrated sulphuric acid, concentrated nitric acid, strong polar solvents.
Ordering information
Diameter Pore Size Quantity Cat No

47mm

0.22μm 100/pk AMPE02247R
0.45μm 100/pk AMPE04547R
                                
Soxhlet Cellulose Extraction Thimbles          
The cellulose extraction thimbles are known  for their purity and consistent high quality. They can be used for Soxhlet Extraction to analyze fats and extract organic compounds.
Features and benefits:
• Made of high-quality cellulose
• Excellent mechanical strength and retention
• Support accuracy and consistency
• Can replace Whatman thimbles
Cat No External Diameter * Height Wall Thickness (mm) Packing
AMT-S01 17 x 33mm 1.0~1.5mm 25thimbles/box
AMT-S02 19 x 90mm 1.5~2.0mm 25thimbles/box
AMT-S03 22 x 60mm 1.5~1.75mm 25thimbles/box
AMT-S04 26 x 60mm 1.5~2.0mm 25thimbles/box
AMT-S05 27 x 80mm 1.5~2.0mm 25thimbles/box
AMT-S06 28 x 100mm 1.5~2.0mm 25thimbles/box
AMT-S07 30 x 60mm 1.5~1.75mm 25thimbles/box
AMT-S08 30 x 80mm 1.75~2.0mm 25thimbles/box
AMT-S09 30 x 100mm 1.5~2.0mm 25thimbles/box
AMT-S10 33 x 80mm 1.5~2.0mm 25thimbles/box
AMT-S11 34 x 80mm 1.5~2.0mm 25thimbles/box
AMT-S12 36 x 80mm 1.5~2.0mm 25thimbles/box
AMT-S13 36 x 94mm 2.0~2.5mm 25thimbles/box
AMT-S14 36 x 100mm 2.0~2.5mm 25thimbles/box
AMT-S15 37 x 130mm 2.5~3.0mm 25thimbles/box
AMT-S16 41 x 150mm 2.5~3.0mm 25thimbles/box
AMT-S17 58 x 170mm 2.5~3.0mm 25thimbles/box
AMT-S18 70 x 240mm 2.5~3.0mm 25thimbles/box
AMT-S19 80 x 200mm 2.5~3.0mm 25thimbles/box
AMT-S20 80 x 250mm 2.5~3.0mm 25thimbles/box
AMT-S20 95 x 250mm 2.5~3.0mm 25thimbles/box
                  
Ashless Quantitative Cellulose Filter Papers         
Quantitative filters are dedicated for gravimetric analysis and the preparation of samples for instrumental analysis.

Specifications
Maximum Pore Size Fast 20~25μm
Medium 15~20μm
Slow 10~15μm
Filtration Speed Fast ≤ 35s
Medium 35~70s
Slow 70~140s
Basic Weight 80±4 g/m2
100pcs/pack. Special specifications and packing acceptable.
Cat No Speed Diameter   Cat No Speed Diameter   Cat No Speed Diameter
AMT-S51 Fast 70mm AMT-S54 Fast 90mm AMT-S57 Fast 110mm
AMT-S52 Medium AMT-S55 Medium AMT-S58 Medium
AMT-S53 Slow AMT-S56 Slow AMT-S59 Slow
 
AMT-S61 Fast 125mm   AMT-S64 Fast 150mm   AMT-S67 Fast 180mm
AMT-S62 Medium AMT-S65 Medium AMT-S68 Medium
AMT-S63 Slow AMT-S66 Slow AMT-S69 Slow
        
Qualitative Cellulose Filter Papers         
Cat No Speed Diameter   Cat No Speed Diameter   Cat No Speed Diameter
AMT-S71 Fast 70mm AMT-S74 Fast 90mm AMT-S77 Fast 110mm
AMT-S72 Medium AMT-S75 Medium AMT-S78 Medium
AMT-S73 Slow AMT-S76 Slow AMT-S79 Slow
 
AMT-S81 Fast 125mm   AMT-S84 Fast 150mm   AMT-S87 Fast 180mm
AMT-S82 Medium AMT-S85 Medium AMT-S88 Medium
AMT-S83 Slow AMT-S86 Slow AMT-S89 Slow

  100pcs/pack. Special specifications and packing acceptable.

        Big Square Filter Paper

Cat No Speed Size   Cat No Speed Diameter   Cat No Speed Diameter
AMT-S91 Fast 60*60cm AMT-S94 Medium 65*65cm AMT-S97 Fast 90*90cm
AMT-S92 Medium AMT-S95 Medium 80*80cm AMT-S98 Medium
AMT-S93 Slow AMT-S96 Medium 85*85cm      

  100pcs/pack. Special specifications and packing acceptable.