hardness testeR/Durometer 
                                          
GY-1, GY-2, GY-3 Fruits Sclerometer (Hardness Tester)               

Function: The sclerometer of fruit (have another name called the sclerometer of the fruit), Mainly to measure the hardness of fruits such as the apple, pear, strawberry, grape, etc.. It is suitable for the scientific research department of fruit tree, fruit company, the fruit tree farm, units such as the universities and colleges etc., to cultivating the improved variety, reap and store, transported and processed, etc. the detection of the hardness of fruit, thus judge the ripeness of the fruit. This instrument is small, light, reading is ocular, it is convenient to carry, is especially suitable for measuring at the scene. Can also assemble and use in forming a complete set in the special-purpose test board, can improve the precision while testing, suitable for measuring and using in the laboratory.

Specifications GY-3 GY-2 GY-1
Range Tip 1: 0.5-12KG/CM² Tip: 0.5-4KG/CM² Tip: 2-15KG/CM²
Tip 2: 1-24KG/CM²
Resolution Tip 1:  0.1    
Tip 2:  0.2    
Accuracy  +-2%
Tip diameter Tip 1) 11.1mm for range 0.5-12KG/CM²
Tip 2) 7.9mm for range 1-24KG/CM²
3.5mm 3.5mm
Tip Depth 10mm
Dimension 150 x 55 x 30mm
Weight 300g
                                     
GY-4 Digital Fruits Sclerometer (Hardness Tester)               
Function
GY-4 Series fruit penetrometer special for inspecting the hardness of the fruits, such as banana, apple, pear, strawberry, grape and so on. Judging the harness and mature of the fruits will good for breed, deposited, export, transport, machining, etc. They are widely used for fruit research department, fruit company, fruit farm, college and so on.
Characters
1. High accuracy and resolution;
2. Peak hold function;
3. Peak automatic clearance function;
4. Tolerance limit(up and down limit);
5. Automatic power off function;
6. 3 units available
7. Full range 150% overload;
8. Reset acceleration of gravity function;
9. LCD screen turn direction function;
10. Large memory (896 value data);
11. Inductive background light;
12. With output signal to control motorized test stand;
13. RS-232C to USB Port;
Specifications
1. Load limit: 5kg (soft fruit)/20kg (hard fruit)
2. Load resolution: 0.001kg/0.01kg
3. Accuracy: ±0.5%
4. Unit: N, Kg, lb
5. Interface: RS-232-USB
6. Battery: Ni-Hi 7.2V 1800mAh
7. Power supply: Input 110~240V 50-60Hz 200mA Output9.4V 600mA
8. Pressure Diameter: 3.5mm 8mm 11mm
9. Pressure Depth: 10mm
10. Weight: 1.5kgs
11. Dimension: 245x66x36mm
                                
Portable Water Hardness Tester EC915               
1. Professional portable water hardness meter is equipped with a large backlit LCD display.
2. 2 to 5 points calibration from low to high concentrations.
3. Selectable multiple water hardness units, including the mmol/L, mg/L(CaCO3), mg/L(CaO), mmol/L(Boiler), mg/L(Ca), French degree, German degree and English degree.
4. Automatic Temperature Compensation provides accurate reading over the entire range.
5. Calibration Due Reminder prompts user to calibrate the meter regularly.
6. Stability indicator automatically shows current measurement status.
7. Auto-Hold function freezes stable reading for easy viewing and recording.
8. Manual temperature calibration improves the measurement accuracy of meter.
9. Help message as a operational guide that helps you quickly begin using the meter.
10. System menu can be used to set 7 parameters, including the number of calibration points, stability condition, hold function, auto-power off, etc.
11. Reset feature automatically resumes all parameters back to factory default options.
12. Expanded memory stores and recalls up to 500 readings.
13. Built-in real-time clock stamps stored data to meet GLP standard.
14. Stored data can be transferred into computer by USB communication interface.
15. Multi-mode power scheme (battery, power adapter, computer's USB port) ensures that use the meter smoothly.
Specifications:
1. Range: 0.05mmol/L~0.2mol/L; Range (CaCO3): 0~19999mg/L; Range (CaO): 0~11220mg/L; Range (Boiler): 0~400mmol/L; Range (Ca): 0~8020mg/L; Range (German Degree): 0~1122°dH; Range (French Degree): 0~2000°f;
Range (English Degree): 0~1404°e
2. Accuracy: ±1% F.S
3. Calibration Points: 2 to 5 points
4. Calibration Solutions: 0.001, 0.01, 0.1mmol/L, 0.001, 0.01, 0.1mol/L
5. Temperature: Range: 0~105°C; Accuracy: ±0.5°C; Calibration Range: Measured value ±10°C
6. Temperature Compensation: 0~50°C
7. Compensation Mode: Manual or Automatic
8. Hold Function: Manual or Automatic
9. Stability Conditions: Low or High
10. Calibration Due: 0 to 31 days
11. Power Off: Manual or Automatic (10, 20, 30 minutes)
12. Reset Function
13. Memory: Stores up to 500 data sets
14. Output: USB Communication Interface
15. Power Requirements: 3 x 1.5V "AA" Batteries
16. Dimensions: 170(L) x 85(W) x 30(H)mm
17. Weight: 300g
                                
Portable Water Hardness Tester YD300               
Measuring Range:
0~10mmol/L; 0~401mg/L (Ca); 0~1000mg/L (CaCO3); 0~100ºfH (France Degree); 0~561mg/L (CaO); 0~56ºdH (German Degree); 0~20mmol/L (Boiler); 0~70ºeH (England Degree)

Temperature: 0 ~ 60.0ºC
Resolution: Hardness: 0.01/0.1; Temp: 0.1ºC
Accuracy: Hardness: ±5% FS; Temp: ±0.5ºC
ATC: 5 ~ 50ºC
Data Memory: 99 group
Buffer: B1: 2.00 x 10ˉ² mmol/L
B2: 2.00×10ˉ
¹ mmol/L
B3: 2.00 mmol/L

                                
Lab Water Hardness Tester YD200               
Features:
●Bench top meter for measurement of water hardness (the total concentration of calcium ion and magnesium ion).
●Electrode adopts model 601-F water hardness combination electrode with patent structure. It consists of measurement electrode, reference electrode and temperature probe. Replaceable measuring head, steady potential, fast response, easy to use.
●Meter adopts intelligent chip design, automatic calibration, automatic temperature compensation, time display, data storage RS232 output, etc.
● Ability to switch among eight units: mmol/L, mg/L (CaCO3), mg/L (CaO), mmol/L (Boiler) and mg/L (Ca). Three options of three units: ºfH (France); ºdH (Germany); ºeH (UK) from WH-Link communication software.
●Equipped with B1, B2 and B3 calibration solution.
●Equipped with WH-Link communication software, connect testing data of meter to computer.
Specifications:
1. Measuring range: 0~10mmol/L; 0~401mg/L(Ca); 0~1000mg/L(CaCO3); 0~100ºfH (France Degree); 0~561mg/L(CaO); 0~56ºdH (German Degree); 0~20mmol/L (Boiler);0~70ºeH (England Degree)
2. Resolution: 0.01 and 0.1 water hardness units
3. Accuracy: ±5% FS
4. Temp. compensation: 5~50ºC automatic
5. Calibration Solution: B1 Calibration Solution: 2.00x10-2mmol/L; B2 Calibration Solution: 2.00x10-1mmol/L; B3 Calibration Solution: 2.00mmol/L
6. Temperature: Measuring range: 0~60ºC; Resolution: 0.1ºC; Accuracy: ±0.5ºC
7. Data storage: 128 groups
8. Content Storage: serial number of measuring value, measuring value, units, temperature, ATC or MTC, date, time and calibration way.
9. Communication Connector: RS232
10. Power: DC 9V
11. Dimension and weight: 160x190x70mm/750g
                                          
TA300 Serials Digital Durometer for Shore Hardness               
FEATURES
Large LCD display for easy reading. With data output. On/off switch. Zero setting at any position.
Holding measured display values. Battery: 1.5V battery
Type A & Type D: Can be used to measure the Rubber, Hard-resin, Glass, Thermoplastic plastics, Printing plates, Fiber, etc. Type C: Can be used to measure the Hardness of Foam, Sponge, Shoes with incorporates material, etc.

Order No. Range Resolution Contact point
TA300A 0-100HA 0.5HA 0.79mm diameter
TA300D 0-100HD 0.5HD SR0.1mm
TA300C 0-100HC 0.5HC SR2.5mm
                          
Analog Durometer for Shore A Hardness               
Model: TB300A (one needle)

Model: TB301A (2 needles to record peak value)
Function:
The durometer is widely applied in the low and medium hardness plastic, all kinds of rubber, multi-dimensional fat, leather, wax hardness test etc. The product refers to ISO868 and the ISO7619 international standard production, conforms to GB/T531, JB6148 and the JJG304 standard.
Character:
One or Dual needle, after test the peak value, the driven needle will stop move, convenience the user to read (for TB301A).
Needle indicates, easy to read, high accuracy.
Handhold design, carry conveniently, handhold measure, also can be installed with match test stand.
Specification:
Dial Range: 0 ~ 100HA
Needle stroke: 2.5 mm
Measure range: 10 ~ 90HA
Needle point size: Ф 0.79 mm
Weight: 300g
                          
Analog Durometer for Shore C Hardness               
Model: TB300C (one needle)

Model: TB301C (2 needles to record peak value)
Function:
SHORE C durometer is widely used in testing of various foam, sponge, microporous material and so on. It is available in HG/T2489-93.
Specification:
High resolution
With facility, easy to operate
Use by handy or by test stand(HLX-AC)
Test range: 0-100 HW;
Available test range: 10-90 HW
Dimension: 115*60*25mm
Stroke: 2.5 mm
Tip dimension: SR2.5mm
Net weight: 0.5Kgs
                          
Analog Durometer for Shore D Hardness               
Model: TB300D (one needle)

Model: TB301D (2 needles to record peak value)
Function:
SHORE D is widely used to test hard rubber, hard colophony, grass, plastic, print board, fibre and so on. It is available in DIN 53505, ASTM D2240,ISO/R868, JIS R7215.executive standart - GB/T531-99, GB2411-80,HG/T2489-93, JJG304-2003.
Specification:
High resolution;
With facility, easy to operate;
Use by handy or by test stand (HLX-D);
Test range: 0-100 HD;
Available test range: 10-90 HD ;
Dimension: 115*60*25(mm);
Stroke: 2.5 mm;
Tip dimension: SR0.1mm;
Net weight: 0.5Kgs;
                                          
HT-6510 Serials Shore Hardness               
Product info: digital durometer for shore hardness testing pocket size model with integrated probe
Test scale: shore hardness
Standards: DIN53505, ASTMD2240, ISO7619, JISK7215
Parameters displayed: hardness result, average value, max. value
Measurement range: 0-100H
Measurement deviation: <1%H
Resolution: 0.1
Auto switch off
With optional RS232C interface
Operating conditions: 0℃ to 40℃
Power supply: 4x1.5V AAA (UM-4) battery
Battery indicator: low battery indicator
Dimensions: 162x65x38mm
Weight (not including probe):173g
Optional Accessories
1. Shore Hardness Tester Measurement Stand
2. Rubber Hardness Test Block (A / D Type )
3. USB, RS-232C data cable with software
4. Bluetooth data out put with software
  Model
  Indenter
  Tested Materials
  Hardness Value
  HT-6510A
0.79 Truncated (Frustum) Cone
Soft Rubber, Elastomers, Natural Rubber Products, Neoprene, Resin, Polyester, Soft PVC, Leather etc.
  20 ~ 90A
  HT-6510B
R0.1 Cone
Middle Hard Rubber Materials, Typewriter Rollers, etc.
Above 90A, Below 20D
  HT-6510C
0.79 Truncated (Frustum) Cone
Plastics and Middle Hard Rubber Materials
  Above 90B, Below 20D
  HT-6510D
R0.1 Cone
Fibre Plastics, Hard Rubber, Hard Plastic Materials, Plexiglas,Stiff Thermo Plastics, Formica, Print Roller, Vinyl-plate, Cellulose Acetate, etc.
  Above 90A
  HT-6510DO
R1.2 Spherical Radius
Plastics and Middle Hard up to Hard Rubber Materials
  Above 90C, Below 20D
  HT-6510O
R1.2 Spherical Radius
Soft Elastic Materials, Print Rollers, Middle Firm Textile Fabrics, Nylon, Orlon, Perlon, Rayon
  Below 20DO
  HT-6510OO
R1.2 Spherical Radius
Sponge- and Cellular Rubber, Foam Rubber, Silicone, Gel-like Materials
  Below 20 O
  HT-6510E
R2.5 Spherical Radius
Hard Sponge, EVA
  Above 90DO, Below 20D
                                          
HT-6510MF Memory Form Shore Hardness Tester               
Features:
It is special for memory foam hardness measurement. (memory foam is also known as slow rebound sponge, space zero pressure, space cotton, temper material, low rebound sponge material, visco plastic, used in high velocity of aerospace, aviation, equipment, high-end consumer goods.)
* It meets standards of DIN 53505, ISO 868, ISO 7619, ASTMD 2240, JISK7215.
* With average calculate function.
* Peak value deposit function.
* Under-voltage alarm function.
* Use “USB data output” and “RS-232 data output” to connect with PC.
* Provide “Bluetooth ™ data output” choice.
Specifications:
1. Parameters Displayed: Hardness Result, Average Value, Max. Value
2. Measurement Range: 0~100HMF
3. Measurement Deviation: <1HMF
4. Resolution: 0.1HMF
5. Spring Force: 455gf
6. Sensor Head Diameter: 25mm
7. Sensor Foot Diameter: 80mm
8. Auto Switch Off
9. Battery Indicator: Low Battery Indicator
10. Power Supply: 4 x 1.5V AAA Size (UM-4) Battery
11. Dimensions: 162 x 80 x 80mm
12. Weight: 250g
                                          
YD-1 Manual Tablet Hardness Tester              
Tablet hardness testers are instruments for detecting breaking hardness of tablet.
Features:
• The tablet is loaded and pressed artificially.
• It has high accuracy press sensor and hardness data is displayed on LED.
• It tests tablet hardness continuously.
• Test data is displayed and locked automatically, so can test be reset and cycled.
• Automation: auto-test, auto-diagnose, auto-alarm.
Specifications:
• Hardness range: 2~199.9N
• Hardness accuracy: ±0.05%
• Moving distance of probe: 20mm
• Power: 220V/ 50Hz/ 10W or 110V/ 60Hz/ 10W
• Dimension: 320*200*100mm

                                          
YD-2 Automatic Tablet Hardness Tester with Printer              
Tablet hardness testers are instruments for detecting breaking hardness of tablet.
Features:
• The tablet is loaded artificially and pressed automatically.
• There is high accuracy press sensor and hardness data is displayed on LED.
• It tests tablet hardness continuously. The biggest number is 100 pieces of a gang.
• Time of testing will be saved by directly measuring the diameter.
• Test data is displayed and locked automatically, so can test be reset and cycled.
• It can deal with and print out such data as: hardness of each tablet, the maximum value, the minimal value, the average value and the number of tablets.
• The parameters can be preset at any time. Either preset or real data is displayed on the LED.
• Automation: auto-test, auto-diagnose, auto-alarm.
Specifications:
• Hardness range (2~199.9)N
• Hardness accuracy:  Max. ±0.05%
• Probe procession range: 3~40mm
• Test period: <20S/P
• Max number in each group: 100P
• Power 220V/ 50Hz/ 60W or 110V/ 60Hz/ 60W
• Dimension: 500*300*160mm

                                          
YD-3 Automatic Tablet Hardness Tester             
Tablet hardness testers are instruments for detecting breaking hardness of tablet.
Features:
• The tablet is loaded artificially and pressed automatically.
• There is high accuracy press sensor and hardness data is displayed on LED.
• It tests tablet hardness continuously. The biggest number is 100 pieces of a gang.
• Time of testing will be saved by directly measuring the diameter.
• Test data is displayed and locked automatically, so can test be reset and cycled.
• It can deal with and print out such data as: hardness of each tablet, the maximum value, the minimal value, the average value and the number of tablets.
• The parameters can be preset at any time. Either preset or real data is displayed on the LED.
• Automation: auto-test, auto-diagnose, auto-alarm.
Specifications:
• Hardness range (2~199.9)N
• Hardness accuracy: Max. ±0.05%
• Probe procession range: 3~40mm
• Test period: <20S/P
• Max number in each group: 100P
• Power: 220V/ 50Hz/ 60W or 110V/ 60Hz/ 60W
• Dimension: 400*240*160mm

                                          
YD-1X Manual Tablet Hardness Tester              
Tablet hardness testers are instruments for detecting breaking hardness of tablet.
Features:
• The tablet is loaded and pressed artificially.
• It has high accuracy press sensor and hardness data is displayed on LED.
• It tests tablet hardness continuously.
• Test data is displayed and locked automatically, so can test be reset and cycled.
• Automation: auto-test, auto-diagnose, auto-alarm.
Specifications:
• Hardness range: 2~200N; 0.2~20Kg
• Hardness accuracy: ±0.05%
• Moving distance of probe: 20mm
• Power: 220V/ 50Hz/ 10W or 110V/ 60Hz/ 10W
• Dimension: 320*200*100mm

                                          
YD-2X Automatic Tablet Hardness Tester             
Tablet hardness testers are instruments for detecting breaking hardness of tablet.
Features:
• The tablet is loaded artificially and pressed automatically.
• There is high accuracy press sensor and hardness data is displayed on LED.
• It tests tablet hardness continuously. The biggest number is 100 pieces of a gang.
• Time of testing will be saved by directly measuring the diameter.
• Test data is displayed and locked automatically, so can test be reset and cycled.
• It can deal with and print out such data as: hardness of each tablet, the maximum value, the minimal value, the average value and the number of tablets.
• The parameters can be preset at any time. Either preset or real data is displayed on the LED.
• Automation: auto-test, auto-diagnose, auto-alarm.
Specifications:
• Hardness range:
2~200N; 0.2~20Kg
• Hardness accuracy: Max. ±0.05%
• Probe procession range: 3~40mm
• Test period: <20S/P
• Max number in each group: 100P
• Power: 220V/ 50Hz/ 60W or 110V/ 60Hz/ 60W
• Dimension: 400*240*160mm

                                          
YD-3X Automatic Tablet Hardness Tester with Printer              
Tablet hardness testers are instruments for detecting breaking hardness of tablet.
Features:
• The tablet is loaded artificially and pressed automatically.
• There is high accuracy press sensor and hardness data is displayed on LED.
• It tests tablet hardness continuously. The biggest number is 100 pieces of a gang.
• Time of testing will be saved by directly measuring the diameter.
• Test data is displayed and locked automatically, so can test be reset and cycled.
• It can deal with and print out such data as: hardness of each tablet, the maximum value, the minimal value, the average value and the number of tablets.
• The parameters can be preset at any time. Either preset or real data is displayed on the LED.
• Automation: auto-test, auto-diagnose, auto-alarm.
Specifications:
• Hardness range: 
2~200N; 0.2~20Kg
• Hardness accuracy:  Max. ±0.05%
• Probe procession range: 3~40mm
• Test period: <20S/P
• Max number in each group: 100P
• Power 220V/ 50Hz/ 60W or 110V/ 60Hz/ 60W
• Dimension: 500*300*160mm

                                          
YPD-300D Tablet Hardness Tester             
YPD-300D tablet hardness tester uses the international advanced sensor circuit, the electrical feed mechanism for automatic measurement. The tester is easy to operate, high-precision test and the number arguments show the measurement data with intuitively.
It’s with LCD (Liquid Crystal Display), realize the man-machine conversation. It has high accuracy, good repeatability. The reading is clear and measuring Kg-N can be set up in the software.
Specifications:
Max Dia. Of tablet: 30mm
Tablet pressure range: 1-30kg
Testing accuracy: ±0.5% of the Max. range
Power: 30W
Resolution: 0.01kg
                                          
YPD-300C Tablet Hardness Tester             
YPD-300C tablet hardness tester using the international advanced sensor circuit, the electrical feed for automatic measurement. The tester is easy to operate, high-precision test and the number arguments show the measurement data with intuitively. the hereinbefore in order to hold the reliable basis of the tablet hardness VS coating, storage and transportation as well as provide with a strong basis for the reliability of measurement of tablets and tablet hardness of the collapse, release (Dissolution) of experimental data.
Technical Parameters:
Max Dia. Of tablet: 30mm
Tablet pressure range: 2~30kg
Testing accuracy: ±0.5% of max
distinguishes rate: 0.01kg
Input power: 30W
Noise: <50dB
Power: 220V±10% 50Hz
Size: 470×290×174mm
Net Weight: 15kgs
                                          
YPD-200C Tablet Hardness Tester             
YPD-200C tablet hardness tester using the international advanced sensor circuit, the electrical feed for automatic measurement. The tester is easy to operate, high-precision test and the number arguments show the measurement data with intuitively. the hereinbefore in order to hold the reliable basis of the tablet hardness VS coating, storage and transportation as well as provide with a strong basis for the reliability of measurement of tablets and tablet hardness of the collapse, release( Dissolution) of experimental data.
Technical Parameters:
Max Dia. Of tablet: 2-30mm
Tablet pressure range: 1-25kg
Testing accuracy: 0.01kg
Testing accuracy:  ±0.5% of max
distinguishes rate:  0.01kg
Input power: 30W
Noise: <50dB
Power: 220V±10% 50Hz
Size: 470 x 290 x 174mm
Net Weight: 15kgs
                                          
Superficial Rockwell Hardness Tester, Surface Rockwell Hardness Tester               
Order Number:
HT-20, HT-20T (For tube): Opening Size 25x25mm
HT-21: Opening Size 50x50mm

HT-20

HT-20T

HT-21

FEATURES
The superficial Rockwell hardness testers comply with the basic designing principles of Rockwell hardness testing in accordance with international standard ISO6508,American Standard ASTM E18 and ASTM E110. The hardness values can be read directly from the superficial Rockwell hardness testers after rapid and accurate operations. It can be considered as a non-destructive testing with very small indentations. This kind of testers can be used at site to test the finished or semi-finished work pieces piece by piece in batches.
Applications:
All metals including iron, steel copper, aluminium, zinc, lead, tin, carburized steel, nitrided steel etc.
TECHNICAL PARAMETERS
1. Initial Test Force: 3kg
2. Total Test Force: 15kg, 30kg, 45kg (for HT-20T 15kg only)
3. Indenter: 120°diamond cone; φ1.588mm carbide ball; φ1.588mm steel ball (HT-20T only)
4. Accuracy: Meets ISO 6508, ASTM E18
5. Resolution: 0.5HR
6. Testing Range: HRN, HRT, HRW, HRX, HRY, etc. 15 scales.
  
                                          
Portable Rockwell Hardness Tester          
Features:
1. Small, portable, accurate, light, weighing only 0.8kg, and can be easily operated like micrometer.
2. Works on practical hardness testing principle, having the same high testing precision as that of a bench type device. It has high testing accuracy complies with the ISO6508 standard, with an error of no more than 1.5HRC.
3. Comprising the main unit and holder, the hardness tester can either be used on the table or easily carried to workshops.
4. It is fast, taking only 10 seconds to finish a test.
5. Value can be conveniently read out.
6. Can be adopted for testing fine, long, small and irregular parts. suitable for testing finished or semi-finished batching processed workpiece one by one.
7. The internal and external surface hardness of steel tubes can be tested by the Rockwell portable hardness tester.
8. Suits parts with small bearing surface, in particular.
9. Initial testing force is 10kg, and its total testing force is 60kg, 100kg and 150kg.
10. Meet the standard standard GB/T230, ASTM E18.

SPECIFICATIONS

Model Opening (mm) Net Weight (Kg) Gross Weight Packing Size (mm)
Tester Stand Tester Stand Tester Stand
HT-15 25x25 0.8 1.5 Aluminum 2.8 1.8 330x255x150 232x215x148
HT-16 50x50 1.2 3.7 390x280x160
HT-17 100x50 1.5 4.5 Iron 5.2 4.9 510x380x180
HT-18 100x100 2.5 6.1

1. Initial test force 10kg, Total test force 60kg,100kg,150kg
2. Indenter: 120° diamond cone; 1.588mm carbide ball
3. Indication error Complies with ISO6508; Repeatability error Complies with ISO6508
4. Resolution 0.5HR
5. Testing range 15 scales, including HRA, HRB, HRC etc.
6. Application All common metal, such as steel, copper, aluminum, nickel, lead, tin, cemented steel, hard alloy, etc.

Standard Packing:
1. Tester
2. Stand
3. Indenter: 120°diamond cone; 1.588mm carbide ball
4. Flat and V anvil
5. Rockwell hardness block
6. Extension
7. Carrying case
Optional Parts:
1. Rockwell test block (HRA, HRB, HRC high, HRC medium, HRC low)
2. Carbide ball indenter: 3.175mm, 6.35mm, 12.7mm for more soft steel
3. Steel ball anvil 1/2", 1", 1-1/3"
4. Concave cylindrical anvil 1/2", 3/4", 1"
5. Convex cylindrical anvil 1/2", 3/4", 1"
                                          
Dual Brinell & Rockwell Hardness Tester               
Order Number:
HT-30: Opening Size 50x50mm
HT-31: Opening Size 100x50mm
HT-32: Opening Size 100x75mm
HT-33: Opening Size 200x100mm
HT-34: Opening Size 200x250mm
HT-35: Opening Size 500x300mm

Features:
Portable Brinell Rockwell hardness tester combines the function of Rockwell scale and Brinell scale, it has a more broad testing range. It is not only suitable for the Brinell scale's testing objectives which includes castings, forgings, steels and nonferrous metals, but also suitable for the Rockwell scale's testing objectives which includes steel, copper, aluminum, carburized layer and steel alloy. Portable Brinell Rockwell type including small-scale series, C-frame series. The testing objectives are different due to the different testing principles.
Specifications:
1. Rockwell Initial Test Force 10kg, Total test force 60kg,100kg,150kg
Brinell Test Force: 62.5kg, 125kg, 187.5kg
2. Rockwell Indenter: 120°diamond cone; 1.588mm carbide ball
Brinell Indenter: 2.5mm, 5mm carbide ball
3. Indication error Complies with ISO6508; Repeatability error Complies with ISO6508
                                          
Portable Webster Hardness Tester               
INTRODUCTION
1. This instrument which can perform on-site hardness test on aluminum alloys, Copper, Brass and soft steel. The test result can be got with only a simple clamp. It is convenient, efficient and reliable.
2. Webster hardness tester is the preferred instrument for materials mechanical performance in accordance with American standard ASTM B647.
3. Used for quick test of hardness of Aluminum Profiles, Tube, Sheets, accessories and other soft metal. Especially suitable for quick, non-destructive on-site 100% final products qualification test.
4. Webster hardness tester can be also used for testing hardness of copper, brass and soft steel.

FEATURES
1. Indenter: Re-Engineered with advanced material and new production technology manufactured, higher hardness, long service life, good interchangeability.
2. Indicator Hand: High strength indicator hand, less likely to be bent by long-term using or mis-operation.
3. Dial Glass: High strength, high toughness, uneasy to be broken or scratched.
4. Handle: Forged aluminum alloy handle with fine anodized finishing, high resistance to abraision and stain.
5. Hardness Blocks: Tested by standard Rockwell hardness tester.
6. Stability: Stable full scale point, stable calibration point, indicator never glides.
7. Conversion: Results can be converted to Vickers, Rockwell and Brinell.
Model Range & Resolution Tested Materials Opening Size (mm) Pins Spring
HT-01

0~20HW; 25~110HRE; 58~131HV @0.5HW

Aluminum

 

HT-02

HT-03

HT-04

0~20HW; 63~105HRF @0.5HW

Brass

HT-05

HT-06

0~20HW; 18~100HRE @0.5HW

Copper

HT-07

HT-08

0~20HW; 50~92HRB @0.5HW

Stainless Steel

STANDARD PACKING:
1. Tester
2. Standard hardness block
3. Spare indenter
4. Calibration wrench
5. Small screwdriver
6. Carrying case
7. Dial assembly
OPTIONAL ACCESSORIES
1. Indenter
2. Standard hardness block
3. Dial glass
                                          
Barcol Hardness Tester, Barcol Impressor               
Order Number:
HT-10: For Aluminum, Aluminum alloys, Copper, Copper alloys, Fiber Reinforced Plastics and rigid plastics etc.
HT-11: For soft metals such as Lead and Tin; soft plastics etc.
HT-12: For Rubber, felt and leather etc.
1. Barcol Impressor is a kind of indention hardness tester. It uses a special shape indenter impressed into the specimen by a standard string pressure and measures the indentation depth to obtain hardness value.
2. Barcol Impressor is mainly applied in two areas: One is Aluminum fabrication industry, to test pure Aluminum, soft Aluminum alloys, thick Aluminum alloys, Aluminum belts, and Aluminum alloys extrusions, bars, castings, forgings and assembled Aluminum alloys parts (e.g. aluminum-alloy door & window, curtain wall etc.) Relevant standard is American standard ASTM B648-00 (Test Method for Indentation Hardness of Aluminum Alloys by Means of a Barcol Impressor); the other is Fiber Reinforced Plastics industry, most Fiber Reinforced Plastics products are required to test Barcol hardness. Relevant Standard is American standard ASTM D2583-07 (Test Method for Indentation Hardness of Rigid Plastics by Means of a Barcol Impressor).
Features:
1.Easy to Use: Single hand operation; easy to use high efficiency able to make test at any site.
2.High Sensitivity: Barcol Impressor has 100 graduations. Its sensitivity is much higher than the Webster hardness tester.
3.Wide Testing Range: Used to test from very soft pure aluminum to very hard aluminum alloys.
4.Less Thickness Requirement: It can test on any workpieces with thickness more than 0.8mm.
5.No Supporting Required: It can test from only one side of the workpiece. It is unnecessary to move or support the workpiece. It is used to test very large and thick workpieces and assembly parts.
6.Easy Conversion: The test results can be converted to HB, HR, HV and HW easily through the conversion table.
7.High Quality Indenter: The indenter has very high hardness, long service life and good interchangeability

Technical Parameter:
1. Testing Range: 0 ~ 100HBa (equivalent to 25 ~ 145HBW)
2. Resolution: 0.5HBa
3. Indication Error: ±2HBa (42 ~ 48HBa); ±1HBa (81 ~ 88HBa)
4. Repeatability Error: ±2HBa (42 ~ 48HBa); ±1HBa (81 ~ 88HBa)
5. Net Weight: 0.5 kg
Standard Assembly
1. 2 Spare indenters
2. Standard hardness block (high)
3. Standard hardness block (low)
4. Calibration wrench
5. Leg
6. Carrying case
Optional Accessories
1. Spare indenters
2. Standard hardness block (high / low)
3. Dial glass
4. Flat leg
                                          
Barcol Hardness Tester, Barcol Impressor HM934-1 and HM934-1+   
Applications:
The Digital Display Barcol Impressor HM934-1 is the Hand-held portable Indentation hardness tester, which is the lastest research and development of our company.
It use for measuring the hardness of: 1) Aluminum 2) Aluminum Alloys 3) Soft Metals 4) Composite Materials 5) Glass Steel; meet the standards: ASTM B648-00; ASTM HD2583-07;GB/T3854-2005.

Features:
1. The measuring result can be digital displayed, avoiding the visual errors.
2. Can measure the Hardness value (HBa).
3. Small size, lightweight, simple to use: press with one hand; can be used in any occasion.
4. With wide measuring range.
5. Can used for measuring the hardness of soft pure aluminum and hard aluminum alloys.
6. The valid test range is the equivalent of 25~150HB.
7. Don’t need measurement stand. Suitable for measuring the super large or ultra-thick work piece and assembling.
8. Have the maximum value retention function, recording the maximum hardness value during measuring.

Model   HM934-1+ HM934-1
  Range   0~100Hba, Amount to 25~135HBW
  Resolution   0.1HBa
  Indication Error   81~88HBa ±1HBa
  42~48HBa ±2Hba
  Repeatability Error   81~88HBa ±1.5HBa
  42~48HBa ±2.5HBa
  Brinell Hardness   √ x
  Vickers Hardness   √ x
  Webster Hardness   √ x
  Rockwell hardness   √ x
  Maximum Hold   √
  Average Calculation   √  
  Operating Condition   Temperature: 0~50°C
   Humidity: <80%RH
  Power Supply   2 x 1.5 V AAA (UM-4) Battery
  Weight  390g (Not Including Batteries)
                                          
HM-6561 Digital Leeb Hardness Tester               
Typical Applications
* Die cavity of molds
* Inspection of bearing and other mass produced parts on a production line
* Failure analysis of pressure vessel, steam generator and other equipment
* Inspection of installed machinery, permanent parts of assembled systems and heavy work pieces.
* Testing surface of a small hollow space
* Material identification in the warehouse of metallic materials
* Rapid testing in large range and multi-measuring areas for large-scale work piece
Testing Features
* Palm size for narrow space.
* Test at any angle, even upside down.
* Direct display of hardness scales HRB, HRC, HV, HB, HS, HL.
* Large memory could store 250 groups including single measured value, impact direction, material and hardness scale etc.
* User recalibration function allowed.
* Can communicate with PC computer for statistics and printing by the optional cable.
* Manual or automatic shut down.
* Low battery indication.
Technical Specifications
Display: 12.5mm LCD with back light
Accuracy: Display error ±0.8% at LD=900
Measuring range: 200-900L
Conversion: HL-HRC-HRB-HB-HV-HSD
Materials: 9 different common materials
With RS232C interface
Memory: 250 data can be stored and re-readable
Impact device: D Type and weight 75g
Power supply: 2x1.5V AAA size battery
Dimension: 146×65×36mm
Weight: 130g (not including batteries)
Working temperature: -10℃~+50℃

                                          
Portable Hardness Tester HL200      Manual         

Model HL200 hardness tester is used widely in on-site hardness test, its menu driven, with large memory capacity, with USB port connect with computer, software to store and analysis its test data, optional mini-printer for on-site printing.

Standard Deliveries:

  • Main unit 1
  • D type impact device 1
  • Test block with HLD value 1
  • Cleaning brush 1
  • Instruction manual 1
  • Carrying case 1
  • Data Pro software 1
  • Cables 1
  • Measuring Range: HLD(170-960)
  • Impact Directions: up, down, horizontal, slanting up, slanting down
  • Measuring materials: steel and cast steel, cold work tool steel, stainless steel, grey cast iron, nodular cast iron, cast aluminium alloys, brass (copper-zinc alloys), Bronze (copper-aluminium alloys/copper-tin alloys), wrought copper alloys
  • Hardness scales: Leeb, Brinell, Rockwell A,B,C, Vicker, Shore
  • Display: 128*64 digital matrix LCD
  • Memory: 500 group (32 every group)
  • Work voltage: 3V( 2 AA alkaline batteries)
  • Interface port: USB
  • Dimensions: 132*76*33mm
  • Weight: 345g
  • Continuous working period: 50 hours (with backlight off)
Impact Device Hardness value of Leeb/ Standard hardness block Error of displayed value Repeatability of displayed value
D

760±30HLD
530±40HLD

±6 HLD
±10 HLD

6HLD
10HLD
DC
760±30HLD
530±40HLD
±6 HLDC
±10 HLDC
6HLD
10HLD
DL
878±30HLD
736±40HLD
±12 HLDL
12HLDL
D+15
766±30HLD
544±40HLD
±12 HLD+15
12HLD+15
G
590±40HLD
500±40HLD
±12 HLG
 
12HLG
E
725±30HLD
508±40HLD
±12 HLE
 
12HLE
C
822±30HLD
590±40HLD
±12 HLC
12HLC
                                          
Portable Hardness Tester MH210     Manual          
Model MH210 hardness tester is develop model of HL200, its in durable metal case, hardness scales are convertable among hardness units: HRB, HRC, HV, HB, HS, HL; attachable thermal mini-printer, fast on-site print; software data and upper lower limits setting and sound alarm; large storage capacity.

Standard Deliveries:

  • Main unit 1
  • D type impact device 1
  • Test block with HLD value 1
  • Cleaning brush 1
  • Instruction manual 1
  • Carrying case 1
  • Data Pro software 1
  • Cables 1
  • Measuring Range: HLD(170-960)
  • Impact Directions: up, down, horizontal, slanting up, slanting down
  • Measuring materials: steel and cast steel, cold work tool steel, stainless steel, grey cast iron, nodular cast iron, cast aluminium alloys, brass (copper-zinc alloys), Bronze (copper-aluminium alloys/copper-tin alloys), wrought copper alloys
  • Hardness scales: Leeb, Brinell, Rockwell A,B,C, Vicker, Shore
  • Display: 128*64 digital matrix LCD
  • Memory: 500 group (32 every group)
  • Work voltage: 3V( 2 AA alkaline batteries)
  • Interface port: USB
  • Dimensions: 132*76*33mm
  • Weight: 345g
  • Continuous working period: 50 hours (with backlight off)
Impact Device Hardness value of Leeb/ Standard hardness block Error of displayed value Repeatability of displayed value
D

760±30HLD
530±40HLD

±6 HLD
±10 HLD

6HLD
10HLD
DC
760±30HLD
530±40HLD
±6 HLDC
±10 HLDC
6HLD
10HLD
DL
878±30HLD
736±40HLD
±12 HLDL
12HLDL
D+15
766±30HLD
544±40HLD
±12 HLD+15
12HLD+15
G
590±40HLD
500±40HLD
±12 HLG
 
12HLG
E
725±30HLD
508±40HLD
±12 HLE
 
12HLE
C
822±30HLD
590±40HLD
±12 HLC
12HLC
                                          
Portable Hardness Tester MH180               
Model MH180 hardness tester is used widely in on-site hardness test, its menu driven, with large memory capacity, with USB port connect with computer, optional mini-printer for on-site printing.

Standard Deliveries:

  • Main unit 1
  • D type impact device 1
  • Test block with HLD value 1
  • Cleaning brush 1
  • Instruction manual 1
  • Carrying case 1
  • Cables 1 
  • Measuring Range: HLD(170-960)
  • Impact Directions: up, down, horizontal, slanting up, slanting down
  • Measuring materials: steel and cast steel, cold work tool steel, stainless steel, grey cast iron, nodular cast iron, cast aluminium alloys, brass (copper-zinc alloys), Bronze (copper-alluminium alloys/copper-tin alloys), wrought copper alloys
  • Hardness scales: Leeb, Brinell, Rockwell A,B,C, Vicker, Shore
  • Display: 128*64 digital matrix LCD
  • Memory: 500 group(32 every group)
  • Work voltage: 3V( 2 AA alkaline batteries)
  • Interface port: RS232
  • Dimensions: 132*76*33mm
  • Weight: 345g
  • Continuous working period: 50 hours (with backlight off)
Impact device Hardness value of Leeb standard hardness block Error of displayed value Repeatability of displayed value
D

760±30HLD
530±40HLD

±6 HLD
±10 HLD

6HLD
10HLD
DC
760±30HLD
530±40HLD
±6 HLDC
±10 HLDC
6HLD
10HLD
DL
878±30HLD
736±40HLD
±12 HLDL
12HLDL
D+15
766±30HLD
544±40HLD
±12 HLD+15
12HLD+15
G
590±40HLD
500±40HLD
±12 HLG
 
12HLG
E
725±30HLD
508±40HLD
±12 HLE
 
12HLE
C
822±30HLD
590±40HLD
±12 HLC
12HLC
                                          
Portable Hardness Tester MH310               
Advantages
● Small volume with light weight, it is convenient for taking. Its outline dimensions are 212mm×80mm×32mm.
● Large screen(128×64 dot matrix LCD), showing all functions and parameters.
● Test at any angle, even upside down.
● Wide measuring range. It can measure the hardness of all metallic materials. Direct display of hardness scales HRB, HRC, HV, HB, HS, HL and three types of strength values immediately.
● Seven impact devices are available for special application. Automatically identify the type of impact devices.
● Large capacity memory could store 500 groups (Relative to average times32~1 ) information including single measured value, mean value, testing data, impact direction, impact times, material and hardness scale etc.
● Upper and lower limit can be preset. It will alarm automatically when the result value exceeding the limit.
● Battery information indicates the rest capacity of the battery and the charge status.
● User calibration function.
● USB port with the PC humanity multi-functions data proceeding software.
● Original imported high speed thermal printer support the immediate printing function. It can save data permanently.
● NI-MH rechargeable battery as the power source. With rechargeable battery, charging for three hours, it can use for two months. Charge circuit integrated inside the instrument. Continuous working period of no less than 150 hours (EL off and no printing).
● Auto power off to save energy.
● Excellent after-sale service system for high quality products--two years guarantee and all life maintenance. Easy to buy and comfortable to use.
Main Application
● Die cavity of molds
● Bearings and other parts
● Failure analysis of pressure vessel, steam generator and other equipment
● Heavy work piece
Technical Specifications
Measuring range: HLD (170~960) HLD
● Measuring direction: 360°
● Hardness Scale: HL, HB, HRB, HRC, HRA, HV, HS
● Display: dot matrix LCD, 128×64 dots
● Data memory: 500 groups max. (relative to impact times 32~1)
● Printing paper: width is (57.5±0.5)mm, diameter is 30mm
● Battery pack: 6V NI-MH
● Battery charger: 9V/500mA
● Continuous working period: about 150 hours (With backlight off, no printing)
● Communication interface: USB1.1
● Outline dimensions: 212mm×80mm×32mm

Error and repeatability of displayed value:

No. Impact Device Type Hardness value of Leeb/ standard hardness block Error of displayed value Repeatability
1
D

760±30HLD

±6 HLD

6HLD

530±40HLD

±10 HLD

10HLD

2
DC
760±30HLD
530±40HLD
±6 HLDC
±10 HLDC
6HLD
10HLD
3
DL
878±30HLD
736±40HLD
±12 HLDL
12HLDL
4
D+15
766±30HLD
544±40HLD
±12 HLD+15
12HLD+15
5
G
590±40HLD
500±40HLD
±12 HLG
 
12HLG
6
E
725±30HLD
508±40HLD
±12 HLE
 
12HLE
7
C
822±30HLD
590±40HLD
±12 HLC
12HLC

Configuration

  No. Item Quantity Remarks
Standard Configuration 1 Main unit 1  
2 D type impact device 1 With cable
3 Standard test block 1  
4 Cleaning brush (I) 1  
5 Small support ring 1  
6 Battery Charger 1 9V 500mA
7 Paper for printing 1  
8 Manual 1  
9 Instrument package case 1  
Optional Configuration 11 Cleaning brush (II) 1 For use with G type impact device
12 Other type of impact devices and support rings   Refer to Table 3 and Table 4 in the appendix.
13 DataPro software 1  
14 Communication cable 1  
                                          
Portable Hardness Tester MH320               
Advantages
● Small volume with light weight, it is convenient for taking. Its outline dimensions are 212mm×80mm×32mm.
● Large screen(128×64 dot matrix LCD), showing all functions and parameters.
● Test at any angle, even upside down.
● Wide measuring range. It can measure the hardness of all metallic materials. Direct display of hardness scales HRB, HRC, HV, HB, HS, HL and three types of strength values immediately.
● Seven impact devices are available for special application. Automatically identify the type of impact devices.
● Large capacity memory could store 500 groups (Relative to average times32~1 ) information including single measured value, mean value, testing data, impact direction, impact times, material and hardness scale etc.
● Upper and lower limit can be preset. It will alarm automatically when the result value exceeding the limit.
● Battery information indicates the rest capacity of the battery and the charge status.
● User calibration function.
● USB port with the PC humanity multi-functions data proceeding software.
● Original imported high speed thermal printer support the immediate printing function. It can save data permanently.
● NI-MH rechargeable battery as the power source. With rechargeable battery, charging for three hours, it can use for two months. Charge circuit integrated inside the instrument. Continuous working period of no less than 150 hours (EL off and no printing).
● Auto power off to save energy.
● Excellent after-sale service system for high quality products---two years’ guarantee and all life maintenance. Easy to buy and comfortable to use.
Main Application
● Die cavity of molds
● Bearings and other parts
● Failure analysis of pressure vessel, steam generator and other equipment
● Heavy work piece
● The installed machinery and permanently assembled parts
● Testing surface of a small hollow space
● Material identification in the warehouse of metallic materials
● Rapid testing in large range and multi-measuring areas for large-scale work piece
Technical Specifications
● Measuring range: HLD 170~960
● Measuring direction: 360°
● Hardness Scale: HL, HB, HRB, HRC, HRA, HV, HS
● Display: dot matrix LCD, 128×64 dots
● Data memory:500 groups max. (relative to impact times 32~1)
● Printing paper: width is (57.5±0.5)mm, diameter is 30mm
● Battery pack: 6V NI-MH
● Battery charger: 9V/500mA
● Continuous working period: about 150 hours (With backlight off, no printing)
● Communication interface: USB1.1
● Outline dimensions: 212mm×80mm×32mm

Error and repeatability of displayed value:

No. Impact Device Type Hardness value of Leeb/ standard hardness block Error of displayed value Repeatability
1
D

760±30HLD
530±40HLD

±6 HLD
±10 HLD

6HLD
10HLD
2
DC
760±30HLD
530±40HLD
±6 HLDC
±10 HLDC
6HLD
10HLD
3
DL
878±30HLD
736±40HLD
±12 HLDL
12HLDL
4
D+15
766±30HLD
544±40HLD
±12 HLD+15
12HLD+15
5
G
590±40HLD
500±40HLD
±12 HLG
 
12HLG
6
E
725±30HLD
508±40HLD
±12 HLE
 
12HLE
7
C
822±30HLD
590±40HLD
±12 HLC
12HLC

Configuration

  No. Item Quantity Remarks
Standard Configuration 1 Main uni 1  
2 D type impact device 1 With cable
3 Standard test block 1  
4 Cleaning brush (I) 1  
5 Small support ring 1  
6 Battery Charger 1 9V 500mA
7 Paper for printing 1  
8 Manual 1  
9 Instrument package case 1  
Optional Configuration 11 Cleaning brush (II) 1 For use with G type impact device
12 Other type of impact devices and support rings   Refer to Table 3 and Table 4 in the appendix.
13 DataPro software 1  
14 Communication cable 1  
                                          
Pressure Manometer                
Applications:
This unit is widely used in measuring fan pressure, wind speed, oven pressure and hydraulic system. It can also be used controlling the gas ratio in combustion and valve control, monitoring blood pressure, breath pressure with other medical device.
Features:
1. With 11 units to select: Bar, mBar, kPa, Kgf/cm², mmHg, cmH2O, Ozf/in², psi, inHg, inH2O, ftH2O.
2. USB port allows you to connect with computer.
Model AMF031 AMF032 AMF033
Measuring Range ±10kPa ±35kPa
Display LCD Display
Accuracy ±0.3% FSO (25℃)
Repeatability ±0.2% (Maximum ±0.5% FSO)
Max Pressure 50kPa 150kPa
Response Time Typical 0.5s
Low Battery Indications YES
Temperature Compensation NO YES
Up Overload Positive Alert Err.1
Up Overload Negative Alert Err.1
Operating Temperature 0~50
Storage Temperature -10~60
Power 4 x AAAA
USB Interface YES
                                  
Pressure Manometer / Air Pressure Gauge AMF109               
Features:
1. 11 selectable units of Measure
2. Max/min/average, and with a relative time
3. Large LCD Back light dual display
4. Zeroing, offset and data compensation
5. Low battery display and automatic shutdown
6. Data Hold and Error code

Specifications:
1. Range & Resolution:
    1) InH2O: ±55.40/0.01
    2) Ozin²: ±32.00/0.01
    3) Psi: ±2.000/0.001
    4) ftH2O: ±4.612/0.001
    5) Mbar: ±137.8/0.1
    6) cmH2O: ±140.6/0.1
    7) Kpa: ±13.79/0.01
    8) kgcm: ±0.140/0.001
    9) inHg: ±0.407/0.001
    10) Bar: ±0.137/0.001
    11) mmHg: ±103.4/0.1
2. Display: Dual LCD
3. Accuracy: 0.3% FSO (25°C)
4. Repeatability: 0.2% (Max 0.5%FSO)
5. Linearity/Hysteresis: 0.29% FSO
6. Maximum Pressure: 10PSI
7. Response Time: 0.5s Typical
8. Low Range Indicator: Err.1
9. Under Range Indicator: Err.2
10. Operating conditions: 32°F to 122 °F (0 to 50°C)
                                          
Stroboscope Meter DT-2350P Serials             
Measurement Range:
DT-2350AP: 50~12000FPM
DT-2350BP: 50~40000 FPM
DT-2350CP: 50~20000 FPM
DT-2350DP: 50~30000 FPM
DT-2350EP: 50~2000 FPM
(fit for print and textile)
Display: 5 x 10mm LED
Accuracy: ±(0.05%n+1d)
Resolution:
0.1 FPM (Less 1000 FPM)
1 FPM (Over 1000 FPM)
Sampling time: 0.3 second
2 ranges: High, Low
Flash adjust: Coarse adjustment, fine adjustment, X 2 and ÷2 for fast check
Triggering Mode: Interior/Exterior
Temperature: 0 ~ 40
ºC
Humidity: Less than 85%RH

                                          
STROBOSCOPE DT2240B            

 

This tachometer is used the microcomputer (CPU) technique, photoelectrical technique and LCD for one instrument combine PHOTO
TACH & MOTION & SURFACE MAR.
Large LCD display with backlight
Digital control adjust flash frequency
Low power consumption
Measure range: 60~39,999RPM
Coarse/Fine adjust amplitude:<1,000RPM Coarse adjust: ±10RPM
                             Fine adjust: ±0.1RPM
                                      ≥1,000RPM Coarse adjust:±100RPM
                             Fine adjust: ±1RPM
Accuracy: ±0.05%
Resolution: <1,000RPM: 0.1RPM
        ≥1,000RPM: 1RPM
10 commonly functions for rotational speed storage,
improves the efficiency of measurement. The intensity
of flashlight is increased 100% than DT2239B.
Battery: 4x1.5V AA battery

                 DT2240B
                                         
Vibration Meter VM-6360            
Filter baud:                                         D                          P
Acceleration: 10Hz-1KHz     0.1-200m/ms²    20.1-400m/ms²
                         10Hz-10KHz   0.3-200ft/ms²    0.3-1312ft/ms²
Velocity:         10Hz-1KHz     0.1-8.0inch/s       0.1-400mm/s       0.004-16.0inch
Displacement: 10Hz-1KHz    0.001-2.0mm       0.001-4.0mm
                                                   0.04-80mil           0.04-160 mil
Accuracy: 5% max
Auto power off
RPM (revolution): 5-100000r/min
Frequency: 0.1 to 10KHz
Metric/imperial conversion
With RS232C interface
Max hold
Operating conditions: 0 - +45℃ (32℉-104℉), 90%RH max
Power supply: 4x1.5V AAA(UM-4)battery
Battery indicator: low battery indicator
Dimensions: 124x62x30mm
Weight: 120g (not including battery)

                                         
Vibration Meter VM-6320            
Application: used for measuring periodic motion, to check the imbalance and deflecting of moving machinery. It designed for present measuring various mechanical vibration. So as to provide the data for the quality control, run time and equipment upkeep. In use the high-performance acceleration meter, realize the repetitiveness and accurate measurement. It has the function of testing axle bearing situation.
Specifications: Acceleration 0.1-200m2/s (10 to 1KHz/10 to 10KHz)
Velocity: 0.1-200mm/s0. (10Hz to 1KHz)
Displacement: 0.001-2.0mm(10Hz to 1KHz)
Accuracy: <5%
Auto power off
Max hold
Operating conditions:0-+40℃(32℉-104℉),≤90%RH
Power supply: 4x1.5V AA(UM-3)battery
Battery indicator: low battery indicator
Dimensions : 160x68x32mm
weight: 181g(not including battery)

 

                                         
Vibration Meter VM-6310            
Application: used for measuring periodic motion, to check the imbalance and deflecting of moving machinery. It designed for present measuring various mechanical vibration. So as to provide the data for the quality control, run time and equipment upkeep. In use the high-performance acceleration meter, realize the repetitiveness and accurate measurement. It has the function of testing axle bearing situation.
Specifications: Velocity: 0.1-200mm/s( 10Hz to 1KHz )
Accuracy:<5%
Auto power off
Max hold
Operating conditions:0-+40℃(32℉-104℉),≤90%RH
Power supply:4x1.5V AA(UM-3)battery
Battery indicator: low battery indicator
Dimensions : 160x68x32mm
weight: 181g(not including battery)

 

                                         
Vibration Meter  TIME7120/TIME7122/TIME7126      
Product Introduction
TIME7120/TIME7122/TIME7126 vibration meter is equipped with acceleration integrated sensor, which makes it has the advantage of being small and light, portably to carry. It is mainly used for the quick check of motor, electric fan, pump, air compressor, machine tools and so on, it is also used for the preventive examination of malfunction of mechanical equipments.

Features
Used for fast failure detecting of motor, electric fan, pump, air compressor, machine tools and so on
Compact size, small Weight, easy handling
Prompt testing of vibration on the workshop machines
For quick checking of unbalance misalignment, bearings and gears
Guard against mechanical malfunction
Holding tested value for 40 seconds
Automatic switch off after 40 seconds
TIME7120 is used specially for velocity testing
TIME7122 is used specially for displacement testing
TIME7126 is used for testing of acceleration,velocity and displacement

Model TIME7120 TIME7122 TIME7126 
Parameters RMS of vibration, velocity (mm/s) Displacement Acceleration, Velocity, Displacement
Testing range Velocity: 0.1mm/s~199.9mm/s Displacement: 0.01~1.999mm (peak~peak) Acceleration:0.01m/S2-199.9m/S2 (peak)
Velocity: 0.01mm/s-199.9 mm/s (RMS)
Displacement: 0.001~1.999mm (peak-peak)
Frequency range Velocity:10Hz~1kHz Displacement: 10Hz~500Hz Acceleration: 10Hz ~ 1kHz; Velocity: 10Hz ~ 1kHz;
Displacement:10Hz ~ 500Hz
Tolerance ±5%
Display 31/2 digits LCD
Power supply two button batteries (LR44 or SR44)
Battery capacity Approx. 4.5 hours working continuously
Operating Temperature 0ºC~40ºC
Humidity <85%
Dimensions (mm) 150×22×18
Weight (g) 55 (including batteries)
                                         
Vibration Meter  TV2000 and TV2600    (Aluminium Alloy)          
Features:
  • This is upgrade model from TV200 and TV260, house materials upgrade from Plastic to Aluminium Alloy
  • 1.Used for fast failure detecting of motor, electric fan, pump, air compressor, machine tools and so on.
  • 2.Compact size, small weight, easy handling
  • 3.Prompt testing of vibration on the workshop machines
  • 4.For quick checking of unbalance misalignment, bearings and gears
  • 5.Guard against mechanical malfunction
  • 6.Holding tested value for 40 seconds
  • 7.Automatic switch off after 40 seconds
  • 8.The Vibration Tester TV200 is used specially for velocity testing
  • Model

    TV2000

    TV2600

    Parameters

    RMS of vibration velocity (mm/s)

    Acceleration, Velocity, Displacement

    Testing range Velocity: 0.1mm/s~ 199.9mm/s Acceleration: 0.01~199.9m/s2 (peak)
    Velocity: 0.01~199.9mm/s (RMS)
    Displacement: 0.001~1.999mm (peak-peak)
    Acceleration: 10Hz~1KHz
    Frequency range Velocity:10Hz ~ 1kHz Velocity:10Hz ~ 1kHz
    Displacement:10Hz ~ 500Hz
    Acceleration:10Hz ~ 1kHz
    Accuracy

    ±5%

    Display 3-1/2 digits LCD
    Power supply two button batteries(LR44 or SR44)
    Battery capacity Approx. 4.5 hours working continuously
    Operating Temp

    0 ~ 40ºC

    Humidity <85%
    Dimension 150mm×22mm × 18mm
    Dimension Weight 90g (including batteries)
                                             
    Vibration Meter  VM400                                    
    Features:
    VM400 uses piezoelectric acceleration transducer to convert vibration signal into electric signal. Then by analyzing input signal, results including RMS of velocity values, peak-peak value of displacement, peak values of acceleration or real-time spectral charts are displayed or printed out. It can not only measure the three parameters, but also for rotational speed measuring.
    The vibration meter is designed to test conventional vibration, especially the vibration test in rotating and reciprocating machines. It can be used not only to test the acceleration, velocity, and displacement of vibration as well as rev (or inherent frequency), but also perform simple failure diagnosis.
    It is widely used in machinery, power, metallurgy, automobile and other industrial fields.
     
    Specifications:
    1. Testing range in Metric
        1) Acce: 0.1 ~ 205.6m/s² (peak)
        2) Velo: 0.1 ~ 400.0mm/s (RMS)
        3) Disp: 0.001 ~ 9.0mm (peak-peak)
    2. Testing range in Imperial
        1) Acce: 0.01 ~ 20.98g (peak)
        2) Velo: 0.01 ~ 15.75 in/s (RMS)
        3) Disp: 0.1 ~ 354.3 mil (peak-peak)
    3. Freq range: 
        1) Acceleration: 10Hz ~ 200Hz, 10Hz ~ 500Hz, 10Hz ~ 1KHz, 10Hz ~ 10KHz
        2) Velocity: 10Hz ~ 1KHz
        3) Displacement: 10Hz ~ 500Hz
    4. Frequency resolution: 0.25Hz
    5. Data memory: 100 x 80 pieces of data and 100 spectrums
    6. Software: Yes
    7. Temp 0
    ºC ~ 40ºC
    8. Tolerance: ±5%
    9. Speed measuring range: 30 ~ 300000 rpm; corresponding to 0.5 ~ 5000Hz
    10. Measuring distance: 0.15 ~ 1m
    11. Display: TFT 320×200 pixels with RGB
    12. Data interface: USB
    13. Overall dimensions: 212 x 80 x 35mm
    14. Printer: Integrated thermal printer
    15. Weight: 320g
    16. Battery: Rechargeable Li battery,1500mAh
    17. Continuous working time: About 50h

    Optional Parts:
    1. Software for PC
    2. Velocity Sensor (Yellow sensor)
                                             
    Vibration Meter  TIME7231, TIME7232                                 
    Product Introduction:
    TIME7231/TIME7232 vibration tester is equipped with piezoelectric It can convert the vibration signal into electric signal, and then the value of acceleration, velocity, displacement or spectrum will be displayed by analyzing the inputting signal. TIME7231/TIME7332is always used for normal vibration testing, especially for the vibration testing of rotating or reciprocating machines.

    Features:
    1. TIME7231 is equipped with low sensitivity probe, suitable for testing strong vibration signal.
    2. TIME7232 is equipped with high sensitivity probe, suitable for testing weak vibration signal.
    3. Two display modes: digital value mode and spectrum mode
    4. Large memory function: 100×100 measured results (100 testing points, 100 data can be stored in each testing points); 100 Spectral chart, Spectrum chart can display in real time
    5. Easy diagnosis: alarm is sounded when vibration go over limit set, and get into spectrum mode
    6. Testing results and spectrum chart can be printed out when connected to printer
    7. 300×200 matrix LCD display, with backlight
    8. More accurate and stable especially in low frequency

    Model TIME7231      TIME7232
     
    Measuring range
    Acceleration 1m/s2~392m/s2 (Peak) 0.1m/s2~20 m/s2 (Peak)
    Velocity 0.1cm/s~80cm/s (RMS) 0.01cm/s~4cm/s (RMS)
    Displacement 0.01mm~18.1mm (Peak-Peak) 0.001mm~0.8mm (Peak-Peak)
     
    Frequency range
    Acceleration 10Hz~200Hz, 10Hz~500Hz, 10Hz~1KHz, 10Hz~10KHz
    Velocity 10Hz~200Hz、10Hz~500Hz、10Hz~1KHz
    Displacement 10Hz~500Hz
    Accuracy ±5%
    Temperature 0ºC~40ºC
    Relative humidity ≤80%
    Dimension 171× 78.5×28mm
    Power Li battery continuous working 20 hours
                                             
    Vibration Meter  TIME7212                                    
    Product Introduction
    TIME7212 vibration tester is equipped with piezoelectric acceleration sensor. It can convert the vibration signal into electric signal, and then the value of acceleration, velocity and displacement will be displayed by analyzing the inputting signal. And the testing result or acceleration spectrum can be printed out with a connected printer. TIME7212 is not only used for normal vibration testing, but also applied for the diagnosis of simple malfunctions. TIME7212 is widely applied in machine manufacturing, electricity, metallurgy, car industry and so on.

    Features
    1. Be widely used in fast inspecting of motor, fan, pump, compressor, machine tool and inspecting of machine failure
    2. Low battery indication
    3. Large memory of 100 readings
    4. Integrated with printer to print out all the readings of current point
    5. With function of time and date setting
    6. With high sensitivity and measuring stability

    Application Field Motor, compressor, bearing and other rotating machine
    Measuring parameters Acceleration (m/s2) Velocity (cm/s), Displacement (mm)
    Display resolution Acceleration 0.1m/s2
    Velocity 0.01 cm/s
    Displacement 0.001mm
    Error ≤±5%
    Testing range Acceleration 0.1m/s2~199.9 m/s2 (peak to peak)
    Velocity 0.01cm/s ~ 19.99cm/s
    Displacement 0.001mm ~ 1.999mm (peak value)
    Data memory 100 group
    Voltage 6V
    Charging time ≤132min
    Power Input: 220V/AC, 50Hz
    Output: 12V/DC, 600mA
    Continuous working time >16 hours
    Temperature 0 ~ 40ºC
    Humidity 90%RH
    Dimensions (mm) 230X84X33
    Weight (g) 600
                                             
    Vibration Meter  AMF019                                       
    *Measuring items: Acceleration 0.1~199.9m/s, Velocity 0.1~1999.9mm/s rms, Displacement 0.001~1.999mm P-P; Environment temperature
    *Accuracy: ±5%
    *Measuring frequency:
    --Acceleration: 10Hz~1KHz (LO); 1KHz~15KHz (HI)
    --Velocity: 10Hz~1KHz (LO)
    --Displacement: 10Hz~1KHz (LO)
    *LCD display: 3.5 digits display
    *Single output: AC output 2V peak (display full scale); load impedance 10KΩ or more earphones can be connected.
    *Vibration pickup: Piezoelectric ceramic accelerometer (Shear-type)
    *Max reading hold
    *ºC/ºF selectable
    *Low battery indication
    *Auto power off
    *LCD backlight display
    *Power supply: 1*9V battery
    *Packing: 12pcs/carton, 17KG.
    *Dimension of carton: 70*46*31cm

                                             
    Vibration Meter  AMF020                                     
    *Measuring items: Acceleration 0.1~199.9m/s, Velocity 0.1~1999.9mm/s rms, Displacement 0.001~1.999mm P-P, Environment temperature
    *Accuracy: ±5%
    *Measuring frequency:
    --Acceleration: 10Hz~1KHz (LO); 1KHz~15KHz (HI)
    --Velocity: 10Hz~1KHz (LO)
    --Displacement: 10Hz~1KHz (LO)
    *LCD display: 3.5 digits display
    *Vibration pickup: Piezoelectric ceramic accelerometer (Shear-type)
    *Equipped two probes (S and L) to adapt the different measurement requirement
    *Provides a magnetic probe to fit the condition uneasy hold on by hand
    *Max reading hold
    *ºC/ºF selectable
    *Low battery indication
    *Auto power off
    *LCD backlight display
    *Packing method: Gift box + PP box
    *Power supply: 1*9V battery
    *Weight: 147g
    *Dimension: 70*30*150mm

                                       
    Belt Tension Tester BTT-2880          
    Application:
    Main used in belt tension measurement, can also be applied to measure the tension of objects such as tapes, wires. Widely applied in industries of automobile, textile, cables, wires, plastic films, paper, printing.
    Measuring range: 0-750N; 0-120lb; 0-77Kg; 0-114Seems
    Accuracy: ≤±5%
    Belt state indication: Low, OK, Hi
    Resolution: ±1N (or1 least significant digit of other units)
    Belt width: ≤36mm
    Overload alarm: 750N
    Max. load: 850N
    Metric/Imperial
    Auto power off
    Pc interface: RS-232C
    Power supply: 4×1.5V AAA(UM-4)
    Operating condition: 0 ~ 50
    ºC, <85% RH
    Dimension: 135×62×33mm (5.3×2.4×1.3inch)
    Net weight: 335g(not including batteries)
    Optional Accessories: Cable and Software for RS-232 and USB

                                      
    Fuel Pressure Meter FPM-2680          
    Simple-to-use digital meter indicates diesel
    fuel pressure. Connect to battery terminals and
    fuel pressure sensor signal wire and digital
    display will show current fuel pressure and, if
    required, maximum pressure detected.

                                      
    Throttle Potentiometer Tester TPT-2690          
    Fast diagnosis of a common electronic fault.
    Simple-to-use digital meter indicates throttle
    position sensor output voltage. Connect to
    battery terminals and sensor signal wire and
    digital display will show output voltage as a
    percentage.
                          
    Digital Screen Tension Meter HT-6510N         
    Applications:
    1. Suitable for general wire mesh tension and steel mesh tension measurement.
    2. Suitable for screen printing and screen stencil measurement, high accuracy. The ideal and necessary tool for production of precise screen and steel mesh. Can avoid the personal or tactile measurement error.
    3. LCD digital display, eliminating reading error.
    4. Use USB data output and RS-232 data output to connect with PC.
    5. Optional Bluetooth and data output.
     

    Specifications:
    1. Measurement Range: 0~60N/cm
    2. Resolution: 0.1
    3. Operating Environment: Temperature: 0 ~ 40
    ºC, Humidity: 10 ~ 90%RH
    4. Power Supply: 4 x 1.5V AAA Size (UM-4) Battery
    5. Dimensions: 175 x 95 x 40mm
    6. Weight: 490g (Not Including Batteries)
    Commonly Used Screen Maximum Tension:
    Data in the table is based on testing condition of Swiss thick gauze. Concrete data depends on the quality of network machine. With good quality network machine, the gauze will not crack even in the highest tension. but if it exceeds the maximum tension, the gauze crackes easily, please reference when trapping net. 
          Maximum Tension   Regulating Pressure
      77T   200 mesh   30N/cm   7kg/cm
      90T   230 mesh   25N/cm   6.5kg/cm
      100T   250 mesh   23N/cm   6kg/cm
      120T   300 mesh   21N/cm   5.7kg/cm
      140T   350 mesh   20N/cm   5.3kg/cm
      165T   420 mesh   18N/cm   5kg/cm

    Note: The above data is the reference data in the use of a factory pneumatic net machine, the specific operation according to actual circumstances.

    Printing Task and Determination of Screen Tension
    Wire Mesh   Printing Task   Tension (N/cm)
    Ultra High Tension Wire Mesh   Circuit Board and Measuring Scale   16~20
    High Strength Wire Mesh   Multicolor and Four-Color Printing (Mechanical Printing)   16~20
    High Precision Ultra Fine Wire Mesh   High Precision Multi Layer Circuit Printing   25~30
    High Precision Polyester Net (Standard Monofilament)   Multicolor and Four-Color Printing (Manual Printing)   8~12
    Ordinary Polyester Net (Standard Monofilament)   Flat Object   8~12
    Nylon Mesh   Curve Surface or Rough Object   8~12