ThermometerS & humidity meters, DEW point meter
                          
CO2 Temperature RH Monitor; IAQ (Indoor Air Quality) Monitor AMT76, AMT77                 
Application:
AMT66, AMT67 has the widely application for classroom, kindergarten, meeting room, office building, shopping mall, theater, exhibition, hospital, hotel, sports center, gymnasium, railway station, bus station, airport and other public place where the comfort, healthy indoor air quality is important.
AMT76, AMT77 Multi IAQ monitor is a cost-effective, air quality indicator, the large single digit LED display with three most critical parameters of indoor air quality, the current CO2 concentration, the ambient temperature and the relative humidity (RH).
Size:
AMT77: (W)x(H)=22.68 x 16.77 inch (576 x 426mm)
AMT76: (W)x(H)=11.69 x 8.27 inch (297 x 210mm) = A4 Paper
 

Why Monitor CO2?
Indoor Air Quality (IAQ) is measure for the quality of air in interiors, the comfortable indoor environmental quality can make people feel fresh, work efficiency and good for the health. The CO
2 concentration is the important factor of good indoor air quality. People breath in oxygen and breath out CO2, nowadays people often close the windows to avoid noise and enjoy the comfort living and working environment provided by air-conditioning systems, which results in the fact that the indoor concentration of CO2 is far higher than outdoor average. With the high CO2 concentration and non- proper ventilation, people will feel headaches, dull, drowsiness, lose of concentration and correspond to the high levels of dust, chemicals and bacteria in the air.
Features
1. CO
2, RH, Temperature measure mode
2. Excellent for measure IAQ in Public places
3. Ultra low cost CO
2 Monitor achieved by New IR-SoC Technology
4. It uses Dual Beam NDIR technology to improve the long term stability
Specifications:
CO2 Measurement Range 0-3,000ppm display
Display Resolution 1ppm@ 0~1,000ppm; 5ppm@ 1,001~2,000ppm; 10ppm@ 2,001~3,000ppm
Accuracy 0~2,000ppm: ±70ppm or ±5% of reading, whichever is greater; over 2000ppm: +/-7%
Repeatability ±20ppm
Temperature Dependence Typ. ±0.2% of reading per °C or ±2ppm per °C, whichever is greater, referenced to 25°C
Pressure Dependence 0.13% of reading per mmHg
Response Time About 2min for 63% of step change
Warm-Up Time <60 seconds at 22°C
Temperature Temperature Range 0°C to 40°C (32°F to 104°F) display
Display Resolution 0.1°C (0.1°F when temperature display is within 100°F)
Display Options °C/°F
Accuracy ±1°C (±2°F)
Response Time 20-30 minutes (case must equalize with environment)
RH Measurement Range 20%-90% RH
Display Resolution 1%RH
Accuracy ±5%RH@23°C
Response time <5 min for 63% of step change
Operating & Storage Condition Operating Temperature 0°C to 40°C (32°F to 104°F)
Humidity Range 0 ~ 95% RH non-condensing
Storage Temperature -20°C to 60°C (-4°F to 140°F)
Power Supply Power Supply Universal 100~240VAC, 50/60Hz , External Power Adaptor
Power Consumption
AMT77
AMT76
11 Watts (Max.)
7 Watts ( Max. )
                          
                                      
Humidity Alert and Thermometer, Dew Meter AMT-123           Manual       
Humidity alarms warn when the %RH exceeds a pre-set HI or LO limit. The probe conveniently mounts on the meter or extends for measurements in ducts or remote locations. It also features Humidity and Temperature adjustments. The unit can be wall-mounted or placed on a flat surface using the fold-out stand.
Specifications:
Temperature Range: -10°C ~ 60°C; 14˚F ~ 140˚F
    Resolution: 0.1°C, 0.2˚F; Accuracy: ±1°C; ±1.8˚F
Humidity: 20% ~95%
    Resolution: 1%
    Accuracy: ±5%RH within 25%~85% and 0~50°C
Dew Point: -29°C ~ 59°C; -20.2
ºF ~ 138.2ºF
    Accuracy: ±2°C@20°C; ±3.6
ºF@68ºF
Sampling rate: about 1 time per 3 Seconds
Setting range of Humidity Alarm: 20~95%
Operating Temperature:
    Meter:0-50°C; Probe: -10 ~ 60°C
Storage Temperature: -20 ~+50°C
Battery: 1.5V AAA Battery 2pcs
Size: 115 x 114 x 66mm
Weight: about 145g
                                    
Humidity and Thermometer AMF026                  

Features
Quickly and conveniently take accurate humidity and temperature readings. It is an ideal humidity & temperature meter instrument with scores of partical applications for laboratorial ,industrial, engineer and professional use.
SPECIFICATIONS
Temperature Measuring Range: -10
ºC~50ºC
Humidity Measuring Range: 5%RH~98%RH
Accuracy of Temperature: ±1
ºC
Accuracy of Humidity: ±3%(30~98%)±5%(10%~30%)
ºC/ºF Selection
Auto /Manual Power Off
Low Battery Indication
Resolution: 0.1
ºC/0.1%RH
Max/Min Measurement
Power: 9V DC battery
Product Net Weight: 194g
Product Size: 207*70*29mm
Packing: Gift box
Standard Quantity Per Carton: 20PCS
Product Size: 62.5*45*28.5cm
Standard Carton Gross Weight: 13.5KG

                                    
Humidity and Thermometer with Dew Point AMA007                  

SPECIFICATIONS
1. Measure Parameters: °C, °F, %RH (relative humidity), dew point temperature
2. Measuring Range: -10 ~ +50°C, +14 ~ +122°F, 0 ~100%RH
3. Resolution: 0.1°C, 0.1°F; 0.1%RH
4. Accuracy: ±1.0°C, ±1.8°F, ±3%RH (5~95%RH)
5. Sample Rate: 1 time sec
6. Display: 4 digits LCD Display
7. Auto Power Off: About 20min
9. Dimension: 121 x 60 x 30mm
10. Weight: 180g
11. Power Supply: DC1.5V (AAA) Battery x 3pcs

                                   
                                  
Temp. Humidity Monitor and Online Loggers AMT208       Manual
Features & Application:
1.Wall mount, Desktop in one monitor.
2.Super large LCD display.
3.Big power button and 5 operation keys.
4.Up to 2s RH response, and high accuracy.
5.Widely used in lab, home, school, office, hospital ect.

Specifications:
1. Temp. range: -20°C~50°C
2. Temp. resolution: 0.1°C/0.1°F 
3. Temp. accuracy: ±1°C(-10°C~50°C) 
4. RH% range: 20~90%RH 
5. RH% accuracy: ±5%RH(at 25ºC) 
6. LCD display: 85x56mm jumbo size
7. Online logging capacity: 64000 points (meter no memory)
8. Visable LED alarm, Hi/Lo setting
9. Wall mount and desktop
10. Power: AC Adaptor (Optional) or Batteries(AAAx4pcs)
                                  
Wall mount / desktop Temp. Humidity Monitor AMT207       Manual
Features & Application:
1.Wall mount, Desktop in one monitor.
2.Super large LCD display.
3.Big power button and 5 operation keys.
4.Up to 2s RH response and high accuracy.
5.Widely used in lab, home, school, office, hospital ect.

Specifications:
1. Temp. range: -20°C~50°C
2. Temp. resolution: 0.1°C/0.1°F 
3. Temp. accuracy: ±1°C(-10°C~50°C) 
4. RH% range: 20~90%RH 
5. RH% accuracy: ±5%RH(at 25ºC) 
6. LCD display: 85x56mm jumbo size
7. Visable LED alarm, Hi/Lo setting
9. Wall mount and desktop
10. Power: Batteries(AAAx4pcs)
                                          
 Humidity & Temperature Meter AMF051 
Feature & Specifications:
1. Temperature range: -10
ºC ~ 50ºC (-30ºC ~ 1000ºC K-type)
2. Accuracy of temperature: ±1
ºC or ±1.8ºF
3. Humidity range: 5%RH ~ 98%RH
4. Accuracy of humidity: ± 3%(30-95%); ± 5%(10-30%)
5.
ºC/ºF selection
6. Auto /Manual power shut off
7. Low battery indication
8. Data hold
9. Temperature resolution: 0.1
ºC
10. Humidity resolution: 0.1%RH
11. Sampling rate: 2.5times/sec
12. Max/ Min function
13. K-type thermocouple temperature measuring
14. Large LCD temperature & humidity dual display
15. Packing Method: Gift Box + PP box
16. Power: 9V Battery
17. Unit size: 160*70*30mm
18. Standard Quantity Per Carton: 20PCS
19. Standard Carton Size: 66.9*45.8*30.7CM
20. Standard Carton Gross Weight:14.2KG

                                          
RC-600 Temperature Humidity Data Recorder      Manual
Main functions:
RC-600 Temperature Humidity Recorder + Data Processor Software
RC-600 Temperature Recorder is widely used for the storage and transportation of the foodstuff medicine fresh and live goods. It is used in the walks of life which are accordant with HACCP System Certificate as well. Furthermore, it can be used in locales where need Temperature supervision, such as labs. RC-600 Temperature Recorder has features as following: stable performance, small size, large data recording capacity, high accuracy and lower watt consumption, etc.
Technical parameters:
◆Temperature measuring range: -40.0℃~+120.0℃
◆Accuracy of temp. measurement under room temp.:±0.2℃ at -20℃~+30℃, ±0.5℃ at others
◆Resolution: 0.1
◆External sensor: PT1000
◆Humidity measuring range: 0~95%RH
◆Accuracy: ±3% RH
◆Resolution: 0.1
◆Recording cycle: Normal mode 2 seconds~24 hours continuous set; Low power consumption mode: 10 seconds~24 hours continuous set
◆Recording capacity: Temperature: 8000 points (Max); Humidity: 8000 points (Max)
◆Applicable environment: Temperature: -35℃~70℃; Humidity: 0%~95%
◆Power supply: 2.4Ah 3.6V one non-chargeable lithium battery
(continuous work at 1~2 years, depend on specific conditions)
◆Data output: Connect the computer with RS-232 interface to transfer data
◆Safe level: IP65
                                          
USB Temperature and Humidity Data logger      
INTRODUCTION
This data logger measures and stores up to 32,000 readings. It can plug data logger straight into PC's USB port without any cables. User can view, analyse and print the data, or export other file formats (txt, xsl, csv, bmp, jpg).

APPLICATIONS:
This data logger is used mainly to monitor and verify temperature-sensitive goods, equipment or areas. For example: Cold Chains; Refrigeration Transportations; HVAC
Food & Pharmaceutical Warehouse.
FEATURES
1. Portable, precise, compact and low cost
2. USB interface directly communicate with PC for setup and data download
3. Unique and uniform PC control software
4. Each unit has single serial number
5. User can set access password for each data logger
6. Alarm and status indication via LED
7. Replaceable lithium battery and data is not lost if exhausted
8. Two point calibration for each channel
Parameter AMY01 AMY02 AMY03 AMY04
Temp. Range -35ºC to 80ºC (-31 to 176ºF)
RH Range N/A 0~100%
Accuracy Temp.:±0.5ºC(±0.9ºF) Temp.:±0.5ºC(±0.9ºF); RH:±3%
Resolution Temp: 0.1ºC(0.2ºF) Temp: 0.1ºC(0.2ºF); RH: 0.1%
Memory Capacity   32,000 readings
Sample Rate 10s ~ 12 hours
Power Supply  Replaceable 3.6V lithium battery, 1200mAh
Size 120 x 37 x 23mm (4.8"x 1.5"x 0.9")
LED Display N/A YES N/A YES
                                          
USB Temperature and Humidity Data logger with External Sensor (2M length)     
INTRODUCTION
This data logger measures and stores up to 32,000 readings. It can plug data logger straight into PC’s USB port without any cables. User can view, analyse and print the data, or export other file formats (txt, xsl, csv, bmp, jpg).

APPLICATIONS:
This data logger is used mainly to monitor and verify temperature-sensitive goods, equipment or areas. For example: Cold Chains; Refrigeration Transportations; HVAC
Food & Pharmaceutical Warehouse.

FEATURES
1. Portable, precise, compact and low cost with 2 meter external sensor.
2. USB interface directly communicate with PC for setup and data download
3. Unique and uniform PC control software
4. Each unit has single serial number
5. User can set access password fo each data logger
6. Alarm and status indication via LED
7. Replaceable lithium battery and data is not lost if exhausted
8. Two point calibration for each channel

Parameter AMY01E AMY02E AMY03E AMY04E
Temp. Range -40 to 125ºC
RH Range N/A 0~100%
Accuracy Temp.:±0.5ºC (±0.9ºF) Temp.:±0.5ºC (±0.9ºF); RH:±3%
Resolution Temp: 0.1ºC (0.2ºF) Temp: 0.1ºC (0.2ºF); RH: 0.1%
Memory Capacity   32,000 readings
Sample Rate 10s ~ 12 hours
Power Supply  Replaceable 3.6V lithium battery, 1200mAh
Size 120 x 37 x 23mm (4.8"x 1.5"x 0.9")
LED Display N/A YES N/A YES
                                          
Temperature and Humidity Data logger AMT-115     
AMT-115 can monitor temperature and humidity values efficiently and conveniently for long time periods by using the Data logger.
The readings are saved in the logger and simply read out by your PC with USB interface.

Features:
1.Memory for 32000 readings (16000 each for temperature and humidity)
2.Temperature Humidity data logger
3.Freely selectable measurement cycle from 2sec. to 24h
4.Battery life: more than 3 years
5.Display all status information through two LED light.
6.Download collected data through USB interface
7.Alarm display if user-defined maximum/minimum values exceed
8.Analysis software used to view graph for logging data

Specifications:
Temp range: -40 to 70
ºC; -40 to 158ºF
Temp Accuracy: ±1
ºC
Humidity range: 0 to 100%RH
Humidity Accuracy: ±2%RH

                                          
Temperature and Humidity Data logger AMF046     
Functional and Technical Parameters:
1. Measuring range: temperature -30-80°C, Humidity: 0-100% RH
2. Resolution: 0.1°C; RH: 0.1
3. Accuracy: temperature -30~0°C: 1.0°C; 0~80°C: 0.5°C; RH 0-20%; 80-100%: 4.5%; 20-80%: 3.0%
4. Recording capacity: 32256
5. Maximum, minimum: √
6. High alarm value, lower limit alarm value: √
7. USB: √
8. In response to the sampling period setting: √
9. Alarm settings: √
10. Light Alarm: √
11. Low power prompts: √
12. Dimensions: 126 * 28 * 22mm
13. Weight: 49g

                                          
Temperature and Humidity Data logger AMT-116      Manual

Meas. rang

0 to 100%RH,-40 to 70°C

Accuracy

±3%RH, ±1°C

Resolution

0.1%RH,0.1°C

Memory

32700

Measuring rate

1 sec. to 24h

Analysis software

Windows 2000,XP,Vista

Size

94*48*33mm

Weight

115g

                                       
Temperature and Humidity Data logger AMT-131  
Features
LCD display shows lasting reading
Data save even when battery is spent
Selectable °C or °F
Mini USB interface
43,000 log readings
Free configuration and graphing software
Dimensions: 92mm * 57mm * 20mm

Specifications

Accuracy

Temp.

±0.5°C (±0.9°F)

RH

±5%RH

Memory

43,000 readings

Measurement Range

-30 to +70°C (-22 to +158°F) , 0 to 100%RH

Storage Temperature

-35 to +80°C (-31 to +176°F)

Resolution

0.1°C, 0.1%RH

Battery

2 * AAA (1.5V Battery)

Typical battery life

1 year

IP Rating

IP54

Logging rate

2s ~ 24h

LCD display area

42mm * 20mm

Weight

150g(without battery) / 200g(with battery)

Accessories

1 Software CD, USB cable, User Manual Battery.
                                          
GSM SMS Alarm Temperature and Humidity Data logger AMT-138, AMT-138E  
Introductions:
AMT-138 series is GSM SMS alarm temperature humidity data logger with LCD display which can measure and record temperature and humidity data of the environment; Meanwhile, it can send alarm message automatically once the setting limits being exceeded and users can dial the SIM card number anytime anywhere to get the SMS feedback of knowing the real-time temperature and humidity. The assorted DGraph software can let users finish the setup of data logger easily; such as log interval setting, alarm limits setting, downloading data for analysis etc. It definitely can satisfy all your professional requirements.

 
Features:
1. Elegant appearance with Large LCD display.
2. GSM SMS alarm and built-in light and sound alarm functions.
3. Data logger will send SMS alarm message once the setting limits being exceeded and users can get the real-time temperature humidity data SMS message anytime anywhere just by dialing the SIM card number.
4. USB interface and professional DGragph software let users can finish device setup easily.
5. Each data logger has the unique serial NO; several data loggers can be on the same interface for data analysis.
6. User can set access password for data logger; name all channels and enable/disable it.
7. Two point calibration with assorted DGraph software.
 
Applications:
GSM series has been widely applied in pharmaceutical industry, transportation industry, refrigeration filed, agricultural field, warehouse, machine room, museum and laboratory ect.
 
Specifications: AMT-138 AMT-138E

Relative Humidity 

Range

0~100%RH

Accuracy

±3 %RH

Resolution

0.1%RH

Temperature 

Range

-35℃ - 80℃ (-31°F~176°F)

Accuracy

±0.3 ℃ (±0.5°F)

Resolution

0.1℃ (0.2°F)

Sensor Type

Internal

External with 3 meters length

Memory Capacity

32,000 record

Sample Rate 2s ~ 24h

Interface

USB

Power supply

2 x AAA 1.5V battery also supported by external power.

Size

120 x 74 x 24mm (4.8 x 2.9 x 0.9")
Note: Other range without RH or high range also available
                                          
GSM/GPRS Temperature and Humidity Data logger   
Introductions:
GSM serials temperature humidity data logger can upload automatically the real-time temperature and humidity to user's PC via GPRS network and users can download all data remotely with our software. It also can send SMS alarm message to user's mobile phone once the setting limits being exceeded, users can dial the SIM card number anytime anywhere to get the SMS feedback of knowing real-time temperature and humidity values.
Features:
1.Easy to use and large LCD display. 
2.Wireless transmission, effective, safe and stable.
3.Lock and unlock with buttons manually. 
4.Rechargeable battery and data stored still even power failure.
5.USB port connection to PC and powerful software to finish setup easily.
6.Build in sound and light alarm and SMS alarm once limits exceeded. 
Applications:
GSM/GPRS series has been widely applied in food industry, pharmaceutical industry, transportation industry, cold chain fields, agricultural field, warehouse, machine room, museum and laboratory ect.
Model R90G-1 R90G-2 R90G-3 R90G-4
Humidity Range 0-100% RH -----
Accuracy ±3% RH -----
Resolution 0.1% RH -----
Temperature Range -20~70ºC -40~100ºC -40~125ºC
Accuracy ±0.3ºC   ±0.5ºC
Resolution 0.1ºC
Sensor Location Internal External External 2 x External
Capacity 65000
Sample Rate 1s~24h
Power Supply 2600mA Rechargeable battery, 5V 1A adapter
Dimensions 140x76x28mm
Weight 180g
Customization Demands Accuracy, external sensor length, recording capacity
                                          
WIFI Temperature and Humidity Data logger   
Introductions:
WIFI serials temperature humidity data logger adopts wifi communication which can realize real time multi point monitoring and remote transmission in LAN and internet mode. Digital LCD display, data recording and alarm function as well as hybrid network connect to the internet. Users can finish the setup on PC or smart phone conveniently and easily.
Features:
1.Easy to use and large LCD display. 
2.WIFI wireless transmission, effective, safe and stable.
3.Lock and unlock with buttons manually. 
4.Rechargeable battery and data stored still even power failure.
5.USB port connection to PC and powerful software to finish setup easily.
6.Build in sound and light alarm.
Applications:
WIFI series has been widely applied in pharmaceutical industry, transportation industry, HACCP control, refrigeration filed, agricultural field, warehouse, machine room, museum and laboratory ect.
Model R90W-1 R90W-2 R90W-3 R90W-4
Humidity Range 0-100% RH -----
Accuracy ±3% RH -----
Resolution 0.1% RH -----
Temperature Range -20~70ºC -40~100ºC -40~125ºC
Accuracy ±0.3ºC   ±0.5ºC
Resolution 0.1ºC
Sensor Location Internal External External 2 x External
Capacity 65000
Sample Rate 1s~24h
Power Supply 2600mA Rechargeable battery, 5V 1A adapter
Dimensions 140x76x28mm
Weight 180g
Customization Demands Accuracy, external sensor length, recording capacity
 
CO2 Temp. RH Data Logger AMF102                         
Features:
1. Super large LCD simultaneously display and log CO2 Level, Temperature, Relative Humidity, Calendar (Y/M/D) and Time (clock).
2. DIGITAL WALL MOUNTABLE/DESK TOP TYPE
3. 40000 data logging memory
4. WARNING CARBON DIOXIDE LEVEL
5. Stable NDIR sensor for CO2 concentration, NDIR (Non-Dispersive Infrared) WAVE GUIDE TECHNOLOGY WITH ABC (Automatic Background Calibration)
6. High and Low setting
7. ALARM OUTPUT DRIVE RELAY TO CONTROL SYSTEM
8. Backlight Function
9. Recall MAX and MIN reading
10. LONG TIME DRIFT COMPENSATION
11. Comes with Power Adaptor
Specifications:
1. Large LCD Display: 3.5" (8.9cm) LCD display with backlight
2. Logger mode: Key start/stop, Immediately, Schedule, Real-time & Roll-over
3. Carbon Dioxide (CO2) Range: 0~9999ppm
4. Accuracy: ±50ppm; ±5% reading (0~2000ppm)
5. Response time: 10sec
6. Temperature Range: 0.0~70.0°C (14~158°F)
7. Resolution: 0.1°C/°F
8. Accuracy: ±0.6°C/±0.9°F (0~50°C/32~122°F), others ±1.2°C
9. Humidity Range: 0.1~99.9%
10. Resolution: 0.1%
11. Accuracy: ±3% (10~90%)
12. Logging Memory: 40000
13. Operating Condition: 0~50°C, 0~95%RH
14. Storage Condition: -20~60°C, 0~99%RH
15. Sensor life: 15 years in normal comm.
16. Power Supply: 1A Output 9V AC Adaptor
          
Ohaus Moisture Analyzer MB Serials     
Designed to quickly, effectively and affordably measure moisture content, the OHAUS MB Series Moisture Analyzers incorporate state-of-the-art heating and weighing technologies that provide fast and accurate results. Perfect for applications in the pharmaceutical, chemical and research industries; versatile and rugged enough for continuous operation in food and beverage, quality control, environmental and many other applications. The MB Series Moisture Analyzers feature excellent repeatability properties for consistent accuracy during testing.
MB45 MB35 MB25 MB23
Specifications:
Model MB45 MB35 MB25 MB23

Capacity

45g 35g 110g 110g
Repeatability (Std Dev) (g) 0.05% (3g sample)
0.015% (10g sample)
0.18% (3g sample)
0.02% (10g sample)
0.2% (3g sample)
0.05% (10g sample)
0.3% (3g sample)
0.2% (10g sample)
Readability 0.01% / 0.001g 0.02% / 0.002g 0.05% / 0.005g 0.1% / 0.01g
Sample Size 3g to 20g typical, 0.5g min.
Output Bidirectional RS-232 w/ GLP/GMP Bidirectional RS-232
Heating Technology Halogen with ramped voltage to save bulb life Infrared (no glass)
Temperature Range 50°C to 200°C in 1° increments 50°C to 160°C in 5° increments
Heating Options 4 (Fast, Standard, Ramp, Step) (1) Standard
Shutoff / Timing Criteria Manual, Custom, pre set
1-120 minutes in 10-second
increments or Auto
Manual, 1-120 min, 30-ses. Inc. to
60 min 1 min. incr. from 60 - 120
min or Auto
Manual, Timed 1 - 99 minutes, 30-second increments
to 60 minutes, or Auto
Power 120, 240 VAC 50/60 Hz 100 to 240 VAC, 50/60 Hz
Tare Range To capacity by subtraction
Operating Temperature Range 41° to 104°F / 5° to 40°C
Calibration Weight and temperature calibration (masses and temperature kit sold separately)
Display Type 128 x 64 pixel dot matrix backlit LCD display Custom backlit LCD
Test Database 50 procedure test library N/A
Result Displays % moisture, % solids, % Regain,
statistics, time, temperature,
weight (g), test ID, drying curve
% moisture, actual weight (g),
actual temperature and test time
% moisture or % solids or weight (g), temperature, time
Display Language English, Spanish, French,
Italian, German
English, Spanish, French English
Pan Size (Diameter) 3.5 inch / 90mm
Dimensions (W x H x D) 7.5 x 6 x 14.2 inches / 19 x 15.2 x 36cm 6.5 x 5 x 11 inches / 17 x 13 x 28cm
Net Weight 10.1 lb / 4.6kg 5 lb / 2.3kg
Shipping Weight 14.1 lb / 6.4kg 8.5 lb / 3.9kg
                                   
Moisture Analyzer MB60, MB61, MB62     
Specifications:
Min. weight of sample: 0.5g
Moisture accuracy: 0.01%
Propose sample weight: 0-10g
Heating time: 1~99 minutes (stepping is 10 s.)
Heating way: Halogen lamp
Working temperature: 10°C~30°C
Interface: RS232C
Heating temperature: 50°C  ~ 160°C (stepping is 1°C)
Display (Dot-matrix LCD): Solid %, Moisture %, g, Time, °C
Pan size: 100mm
Material breakdown: PBT, STAINLESS IRON 304
Size: 285×160×150mm

Model MB62 MB61 MB60
Readability 0.001g 0.005g  0.01g
Capacity 0-50 g
Repeatability 0.20% 0.30% 0.50%
                                   
Halogen Moisture Analyzer MB65, MB66, MB67     

Features:
1.Halogen heating
2.Pansize:90mm
3.Stainless steel chamber
4.Temperature and time can be set
5.The percentage of moisture content

Model MB64 MB65 MB66 MB67
Range 110g
Readability 0.01g 0.005g 0.002g  0.001g
Operating Temperature 5~35°C
Sensor Load Cell
Display LCD
Calibration External
Pan Size 90mm
Dimensions 200 x 180 x 380mm
Weight 5.8Kg
Heating System Halogen Lamp
Temperature Sensor PT100
Temperature Range 40~199°C
Temperature Step 1°C
Moisture Range 0.00~100.00%
Moisture Readability 0.1% 0.04% 0.01%
Timer 1~99min step 1s
Data Storage 15
                                   
5" Touch Screen Moisture Analyzer MB68    

Features:
1.Halogen heating
2.Pansize:90mm
3.Stainless steel chamber
4.Temperature and time can be set
5.The percentage of moisture content

Model MB68
Range 110g
Readability 0.001g
Operating Temperature 5~35°C
Sensor Load Cell
Display LCD
Calibration External
Pan Size 90mm
Dimensions 200 x 180 x 380mm
Weight 5.8Kg
Heating System Halogen Lamp
Temperature Sensor PT100
Temperature Range 40~199°C
Temperature Step 1°C
Moisture Range 0.00~100.00%
Moisture Readability 0.01%
Timer 1~99min step 1minute
Data Storage 20
                                   
Halogen Moisture Meter     
Features:
1. The super high resolution back window matrix liquid crystal display (LCD), making it easier to operate in the dark place, and the user will have a more comfortable vision.
2. Touch-tone chain plate makes the operation easier.
3. The high precision heat insulation type sensor makes the temperature for data acquisition reliable.
4. The use of halide torch for heating and curing make warming more rapidly and test time shorter.
5. In the process of test, the dry state can be directly confirmed to speculate the finish time.
6. It is equipped with automatic peeling function; it can measure immediately and continuously, and also measure accurately through the zero drift correction.
7. Installed with RS232C interface inside, the products can be directly connected to computer, printer, etc.
8. The Halogen drying method moisture analyzer can test the free water content of chemical raw materials, grain, mineral, biological product, food, pharmaceutical raw materials, paper, textile raw materials, etc.

Specifications:
Model MB75 MB76 MB77 MB78 MB79
Weighing Range 10g 50g 50g 50g 100g
Readability 10mg 5mg 1mg 10mg 1mg
Repeatability (3g samples) 0.50% 0.30% 0.20% 0.50% 0.30%
Minimum Sample Amount  0.5
Advised Sample Amount 3-10g
Heat up time 1-99minutes,1 minutes interval
Temperature Program Standard
Terminal Control Timing, Automatic
Heating Temperature Range                       50-180 degrees
Showing Content Moisture%, Solid%, Weight, Time, Data etc
Pan Size 100mm
Dimension 265x160x150
Net Weight 5kg
Heating Source Halide Torch
                                   
Halogen Moisture Meter     

Features:
1.Halogen heating with high accuracy.
2.Pansize:90mm
3.LCD display.
4.Standard heating, step heating and quick heating selectable.
5.RS232 communications port

Model MB80 MB81 MB82
Range 120g 100g
Readability 0.005g 0.001g  0.0001g
Operating Temperature 5~35°C
Baud Rate 9600
Display LCD
Calibration External
Pan Size 90mm
Dimensions 310 x 205 x 200mm
Weight 5.8Kg
Heating System Halogen Lamp
Temperature Range RT~200°C
Temperature Step 1°C
Moisture Range 0.00~100.00%
Moisture Readability 0.1% 0.04% 0.01%
Timer 1~99min step 1minute
Data Storage 10
                                         
Double Function Digital Moisture Meter MC-7825PS     
Application: applicable of wood fiber materials, wooden articles, Chinese traditional medicine, tobacco, cotton paper, building, soil and other fibre materials.
Meaning: pin & pinless type
Specifications: wood over 150 species
Building moisture: 0-50%
Measuring range: 0-80%
Resolution: 0.1
Display: LCD display
Accuracy: ±(0.5%n+0.1)
Power supply: 4x1.5V AAA (UM-4) battery
Battery indicator: low battery indicator
Dimensions: 165x62x26mm
Weight (not including probe):175g
 

                                     
Digital Moisture Meter MC-7825P     
Application: applicable of wood fiber materials, wooden articles, Chinese traditional medicine, tobacco, cotton paper, building, soil and other fibre materials.
Meaning: Pin type
Specifications: wood over 150 species
Building moisture: 0-50%
Measuring range: 0-80%
Resolution: 0.1
Display: LCD display
Accuracy: ±(0.5%n+0.1)
Power supply: 4x1.5V AAA (UM-4) battery
Battery indicator: low battery indicator
Dimensions: 165x62x26mm
Weight (not including probe):119g

                                     
Digital Pinless Moisture Meter MC-7825S     
Application: applicable of wood fiber materials, wooden articles, Chinese traditional medicine, tobacco, cotton paper, building, soil and other fibre materials.
Meaning: Pinless type
Specifications: wood over 150 species
Building moisture: 0-50%
Measuring range: 0-80%
Resolution: 0.1
Display: LCD display
Accuracy: ±(0.5%n+0.1)
Power supply: 4x1.5V AAA (UM-4) battery
Battery indicator: low battery indicator
Dimensions: 165x62x26mm
Weight (not including probe):119g

                                     
Digital Moisture Meter MC-7825F (For Form) MC-7825C (For Cotton)     
Features:
*Be a powerful and versatile instrument for measuring and diagnosing dampness in foam through testing the capacitance, the foam moisture can be obtained.
*Digital display gives exact reading with guessing or errors while a color coded light (LED) indicates the moisture condition. This combined presentation of moisture measurement helps the user to map the extent of problems and monitor changes in condition precisely and reliably.
*Specially used to test cotton moisture in the process of allotment, acquisition, storage and machining.
*Can communicate with PC computer for statistics and printing by the optional cable and software for RS232C interface. (Optional)
*Auto Power off
Specifications:
Display: 4 digits, 10mm LCD; with color coded LED indication, Green LED represents a safe, air-dry condition; Yellow LED represents a borderline condition; Red LED represents a damp condition.
Measurement Range: 0~200%
Accuracy: ±(0.5%n +0.5)
Resolution: 0.1
Penetration depth: up to 50mm
PC interface: RS232C interface
Power supply: 4x1.5 AAA size (UM-4) battery
Power off: 2 modes, Manual off at any time; Auto power off after 5 minutes from last key operation
Operating conditions: Temperature: 0-50 ℃; Humidity : below 90% RH
Dimensions: 165x62x26mm or 6.5x2.4x1.0"
Weight: 119g (not including batteries)

                                     
Digital Wood Moisture Meter TA301    
FEATURES
Large LCD display for easy reading.
Date-hold function for holding measuring values.
With 4pins.
Auto power off.
Power:6F22 9V battery.
Range: 6%~40%
Resolution: 0.1%
Accuracy: ±1%
                                     
Digital Moisture Meter MC-7812     
Application: applicable of wood fiber materials, wooden articles, Chinese traditional medicine, tobacco, cotton paper, building, soil and other fibre materials.
Operating principle: electromagnetic induction
Measurement range: 0-80%
Resolution: 0.1
Accuracy: ±1
Induction value: specified
Power supply: 4x1.5V AAA (UM-4) battery
Dimensions: 220x77x43mm
Weight (not including batteries):193g

                                     
Digital Textile Moisture Meter MCT-1     
Applications:
MCT-1 Moisture meter for textile is a high-performance digital moisture testing equipment. The instrument is widely used in leather, cloth, garments, yarn, textile and other industries requiring quick measurement of moisture. Small volume and light weight of the instrument enable the workers to carry it conveniently and conduct on-site measurement quickly. Thus, it is of great help for the on-site workers in moisture measurement.

Specifications:
1). Scope of Moisture Measurement: 0~40%
2). Applicable temperature: -5℃ ~ +60℃
3). Preciseness: ±0.5%
4). Response time: 1 second
5). Ways of display: 3½ bit digital LCD screen
6). Scanning depth of electromagnetic wave: 50mm
7). Gear shift: 0~10
8). Power supply: 9V(6F22 type)
9). Volume: 160×60×27mm
10).Weight: about 200g
                                     
Digital Concrete Moisture Meter MCT-2     
Applications:
MCT-2 Moisture meter for concrete, walls and floors is a high-performance and digital moisture testing equipment. It is widely used in rendering of paints, flooring installation, floor construction, building, leakage inspection and repairing of houses, chimney cleaning, indoor and outdoor decoration and other industries requiring quick measurement of moisture, such as moisture measurement of walls, cement floor, wall tiles, marble, gypsum board, concrete, etc.

Specifications:
1). Scope of Moisture Measurement: 0~40%
2). Applicable temperature: -5℃ ~ +60℃
3). Preciseness: ±0.5%
4). Response time: 1 second
5). Ways of display: 3½ bit digital LCD screen
6). Scanning depth of electromagnetic wave: 50mm
7). Gear shift: 0~10
8). Power supply: 9V(6F22 type)
9). Volume: 160×60×27mm
10).Weight: about 200g
                                     
Digital Paper Moisture Meter MCT-3     
Applications:
MCT-3 Moisture meter for paper is a high-performance digital moisture testing equipment. The instrument is widely used in printing, paper factory, carton factory, newspaper and other industries requiring quick measurement of moisture. Small volume and light weight of the instrument enable the workers to carry it conveniently and conduct on-site measurement quickly. Thus, it is of great help for the on-site workers in moisture measurement.

Specifications:
1). Scope of Moisture Measurement: 0~40%
2). Applicable temperature: -5℃ ~ +60℃
3). Preciseness: ±0.5%
4). Response time: 1 second
5). Ways of display: 3½ bit digital LCD screen
6). Scanning depth of electromagnetic wave: 50mm
7). Gear shift: 0~10
8). Power supply: 9V(6F22 type)
9). Volume: 160×60×27mm
10).Weight: about 200g
6 Kinds of Paper:
Code 1: Coated paper, printing paper, copy paper, fax paper
Code 2: Newspaper, White board paper
Code 3: Corrugated paper, Kraft paper
Code 4: Paper below 50g/M²
Code 5: Pulp board
Code 6: Cartons, Corrugated paper board
                                     
Digital Moisture Meter AMA005    
Specifications:
1. Parameters: material moisture content %, temperature ℃, ℉
2. Accuracy: Conductivity measurement: ±2% Temperature: ±1℃
3. Resolution: 0.1% , 0.1℃, 0.1℉
4. Measurement range: 0.0%~95.7%, -10 ~ +50℃
5. Digital display: 3 digitals.
6. Measurement selection:
   1): Material 1: 8.9~95.7% (Hard wood such as Beech, Spruce, Larch, Birch, Cherry, Walnut and so on)
   2): Material 2: 7.1~80.0% (Soft wood such as Oak, Pine, Maple, Ash-tree, Douglas fir, Meranti and so on.)
   3): Material 3: 1.0~2.5% (Cement or Concrete plane, Plaster produce.)
   4): Material 4: 0.0~3.3% (Anhydrite plane)
   5): Material 5: 0.7~3.8% (Cement mortar)
   6): Material 6: 0.5~7.4% (Lime mortar)
   7): Material7: 0.0~23.4% (Bricks)
8. Ideal for total 7 building materials
9. Double display

                                     
Digital Moisture Meter MC-7806     
Application: applicable of wood fiber materials, wooden articles, Chinese traditional medicine, tobacco, cotton paper, building, soil and other fibre materials.
Measurement range: moisture content 0-50%
                               Temperature –10-60℃
Resolution: 0.1
Accuracy: Moisture: ±(0.5%n+0.1)
               TEMP: ±0.8℃
Calibration: automatic
Power supply: 4x1.5V AA (UM-3) battery
Dimensions: 182x68x38mm
Probe dimension: 170x44x25mm
Weight (not including probe):334g

                                     
Capacitive Moisture Meter MS350    
Capacitive moisture meter MS350 is used for measuring moisture content of soil , chemical combination powder, coal powder and other powder materials. It applicable of chemical industry and other relevant industry.
Features:
1.1. It is portable, compact, easy to use and the moisture measurement readings are instant.
1.2. Digital display with back light gives exact and clearly reading although you stay at the somber conditions.
1.3. It will save time and expense by monitoring dryness and helps to prevent deterioration & decay caused by moisture whilst in storage, therefore processing will be more convenient and efficient.
1.4. The moisture meter operates by electrical resistance and has automatic temperature compensation.
1.5. Manual off at any time .Auto power off after 5 minutes from last operation.
1.6 Data hold function, Low battery alert.
Specifications:
Display: 4 digital LCD
Measuring range: 0-80%
Temperature: 0-60°C
Humidity: 5%-90%RH
Resolution: 0.1
Accuracy: ±0.5%n
Power supply: 4x1.5 AAA size (UM-4) battery
Dimensions:140mm×60mm×22mm
Needle:230mm
Weight:175g (not including batteries)

                                     
Capacitive Moisture Meter MS350A    
 

Features:

1.1.It is portable, compact, easy to use and the moisture measurement readings are instant.

1.2.Digital display with back light gives exact and clearly reading although you stay at the somber conditions.

1.3.It will save time and expense by monitoring dryness and helps to prevent deterioration & decay caused by

 moisture whilst in storage, therefore processing will be more convenient and efficient.

1.4.This instrument adopted the high frequency principle based on the introduction of the 

most advanced technology from foreign country.

1.5.Manual off at any time .Auto power off after 5 minutes from last operation.

1.6 Data hlold function. Low battery alert.

 

Specification

Display:4 digital LCD

Measuring range :0-60%

Temperature:0-60°C

Humidity:5%-90%RH

Resolusion:0.1

Accuracy: ± 0.5%n 

Power supply: 

4x1.5 AAA size (UM-4) battery

Dimensions:140mm×60mm×22mm

Needle:280mm

Weight:175g (not including batteries)

 

 

                                     
Wood Dust Moisture Meter TK100W    
Applications: Wood powder moisture meter TK100W used for measuring moisture content of wood materials (such as sawdust, paillasse, bamboo powder). It applicable of paper making , flake board , furniture and mechanism of charcoal industry.
Specification:
Display:4 digital LCD
Measuring range: 0-60%
Temperature: 0-60°C
Humidity: 5%-90%
Resolution: 0.1
Accuracy: ± 0.5%n
Operation: Electrical Resistance Method, Automatic temperature Compensation
Power supply: 4x1.5 AAA size (UM-4) battery
Dimensions: 460mm×75mm×35mm
Weight:203g (not including batteries)

 

                                     
Pin Moisture Meter MS7100    
 
Features:
1.1.It is portable, compact, easy to use and the moisture measurement readings are instant.
1.2.Digital display with back light gives exact and clearly reading although you stay at the somber conditions.
1.3.It will save time and expense by monitoring dryness and helps to prevent deterioration & decay caused by moisture whilst in storage, therefore processing will be more convenient and efficient.
1.4.The moisture meter operates by electrical resistance and has automatic temperature compensation.
1.5.Manual off at any time .Auto power off after 5 minutes from last operation.
1.6 Data hold function. Low battery alert.
Specification:

Display:4 digital LCD

Measuring range :0-80%
Operating conditions
         Temperature:0-60°C
         Humidity:5%-90%RH
Resolusion:0.1
Accuracy: ± 0.5%n
Operation:
         Electrical Resistance Method, Automatic temperature Compensation
Power supply:
         4x1.5 AAA size (UM-4) battery
Dimensions:
         Main Unit: 140mm×60mm×22mm
         Sensor: 72mm×40mm×20mm
Weight:
                   175g (not including batteries)
Wood Codes:7 kinds
 

 

                                     
Wood Moisture Meter DM200W    

 

Features:
Its integrative design convenient to carry outside for testing.
Digital display with back light gives exact and clearly reading although you stay at the somber conditions.
It is small in size, light in weight ,easy to carry out for fieldwork if needed.
Manual off at any time.
 
Specification:

Display:4 digital LCD

Measuring range :
0-2%
0-90%
Measuring condition:
Temperature:0-60°C
Humidity:5%-90%RH
Resolusion:0.1 or 0.01
Accuracy: ± 0.5%n
Power supply:
9V battery (6F22)
Dimensions:
160mm×60mm×25mm
Weight:203g (not including batteries)
 

 

                                     
 Sawdust Moisture Meter MS-W  
Features:
1. It is portable, compact, easy to use and the moisture measurement readings are instant.
2. Digital display with back light gives exact and clearly reading although you stay at the somber conditions.
3. It will save time and expense by monitoring dryness and helps to prevent deterioration & decay caused by moisture whilst in storage, therefore processing will be more convenient and efficient.
4. The moisture meter operates by electrical resistance and has automatic temperature compensation.
5. Manual off at any time .Auto power off after 5 minutes from last operation.
6. Data hold function. Low battery alert.
7. Separate probe can easy testing the small pieces materials.
Specification
Display:4 digital LCD
Measuring range :0-84%
Operating conditions:
Temperature:0-60
Humidity:5%-90%
Resolusion:0.1
Accuracy: ± 0.5%n
Operation: Electrical Resistance Method, Automatic temperature Compensation
Power supply:
4x1.5 AAA size (UM-4) battery
Dimensions:
main unit: 460×75×35mm
sensor:    370x45x22mm
Weight: 265g
 

 

                                     
Cotton Moisture Meter TK100C    
Applications:
he Cotton Moisture Meter is a valuable testing instrument during the cotton collection, processing and when buying or selling cotton. The newly designed TK100C utilizes the relationship between moisture content and electrical resistance to effectively measure the moisture content of cotton, seed-cotton and lint.
Features:
Its integrative design convenient to carry outside for tesing.
Digital display with back light gives exact and clearly reading although you stay at the somber conditions.
It is small in size,light in weight ,easy to carry out for fieldwork if needed.
Manual off at any time .Auto power off after 5 minutes from last operation.
Specifications:
Display:4 digital LCD
Measuring range :2%-60%
Temperature:0-60
Humidity:5%-90%
Resolusion:0.1
Accuracy: ± 0.5%n
Power supply: 4x1.5 AAA size (UM-4) battery
Dimensions: 460mm×75mm×35mm
Weight:203g (not including batteries)

                                     
Cotton Lint Moisture Meter MS7100C    
Specification
Display:4 digital LCD
Measuring range :5%-40%
Operating conditions:
                   Temperature:0-60
                   Humidity:5%-90%
Resolusion:0.1
Accuracy: ± 0.5%n
Operation:
                    Electrical Resistance Method, Automatic temperature Compensation
Power supply:
                    4x1.5 AAA size (UM-4) battery
Dimensions:
                   Main Unit:140mm×60mm×22mm
                   Probe:72mm×40mm×20mm
                   Pin :80mm
Weight:195g (not including batteries)
 

                                     
Grains Moisture Meter TK25G    
Features:
The Grain Moisture Meter TK25G is used for fast and accurate measurement of moisture in the process of allotment, acquisition, storage, machining of packed grains, Barley, Corn, Hay, Oats, Rapeseed, Rough Rice, Sorghum, Soybeans and Wheat .
Specifications:
Display:4 digital LCD
Measuring range: 7%-28%
Temperature: 0-60°C
Humidity: 5%-90%
Resolution: 0.1
Accuracy: ± 0.5%n
Operation: Electrical Resistance Method, Automatic temperature Compensation
Power supply: 4x1.5 AAA size (UM-4) battery
Dimensions: 460mm×75mm×35mm
Weight:203g (not including batteries)
Grain:25 Kinds

                                     
Grains Moisture Meter TK100S    
Features:
1. Display:4 digital LCD
2. Measuring range: 5-30%
3. Operating conditions: Temperature:0-60; Humidity: 5%-90%
4. Resolusion:0.1
5. Accuracy: ±0.5%n
6. Operation: Electrical Resistance Method, Automatic temperature Compensation
7. Power supply: 4x1.5 AAA size (UM-4) battery
8. Dimensions: 460 x 75 x 35mm
9. Weight:203g (not including batteries)
10. Grains:5 kinds (Corn, wheat, rice, bean, wheat flour.)

                                     
Tobacco Moisture Meter TK100T   
The Tobacco Moisture Meter is a valuable testing instrument during the Tobacco collection, processing and when buying or selling. The newly designed TK100T utilizes the relationship between moisture content and electrical resistance to effectively measure the moisture content of tobacco quickly and accurately.
Specifications
Display:4 digital LCD
Measuring range :8%-40%
Temperature:0-60
Humidity:5%-90%
Resolution:0.1
Accuracy: ± 0.5%n
Operation: Electrical Resistance Method, Automatic temperature Compensation
Power supply: 4x1.5 AAA size (UM-4) battery
Dimensions: 460mm×75mm×35mm
Weight: 203g (not including batteries)

                                     
Tobacco Moisture Meter MS320   
Specification
Display:4 digital LCD
Measuring range :8%-40%
Operating conditions:
                   Temperature:0-60
                   Humidity:5%-80%
Resolution:0.1
Accuracy: ± 0.5%n
Operation:
                    Electrical Resistance Method, Automatic temperature Compensation
Power supply:
                    4x1.5 AAA size (UM-4) battery
Dimensions:
                   140mm×60mm×22mm
Weight:175g (not including batteries)
Needle:80mm (150mm Optional)
Code choice:11 kinds
 

 

                            
General Purpose Moisture Meter TK100   
Features: The Multifunctional Moisture Meter TK100 is a high-tech testing instrument in our company. The newly designed moisture meter with extensive probes suits to many materials moisture content testing, just as grains, chemical raw material, plastic granule, soap powder, soil, Chinese traditional medicine and other fibre materials.
The moisture meter TK100 utilizes the relationship between moisture content and electrical resistance to effectively measure the moisture content quickly and accurately.
Compact, portable, easy to use.
Digital display with backlight.
Manual power off & Auto power off.
Specification
Display:4 digital LCD
Measuring range :0-80%
Temperature:0-60
Humidity:5%-90%
Resolusion:0.1
Accuracy: ± 0.5%n
Operation: Electrical Resistance Method, Automatic temperature Compensation
Power supply: 4x1.5 AAA size (UM-4) battery
Dimensions: 460mm×75mm×35mm
Weight:203g (not including batteries)

                                     
Paper Moisture Meter DM200P   
Features:
Its integrative design convenient to carry outside for testing.
Digital display with back light gives exact and clearly reading although you stay at the somber conditions.
It is small in size, light in weight ,easy to carry out for fieldwork if needed.
Manual off at any time.
Specification
Display:4 digital LCD
Measuring range :
0-2%
0-90%
Measuring condition:
Temperature:0-60°C
Humidity:5%-90%RH
Resolusion:0.1 or 0.01
Accuracy: ± 0.5%n
Power supply:       
        9V  battery (6F22)
Dimensions:
         160mm×60mm×25mm
Weight:203g (not including batteries)
 

 

                                     
General Purpose Moisture Meter MS7200   
 

MS7200 is used for measuring moisture content of wood ,Timber, paper, Bamboo, Carton and other relevant materials. It applicable of woodwork, paper making , flake board, furniture , timber traders and other relevant industry..

Features:
1. It is portable, compact, easy to use and the moisture measurement readings are instant.
2. Digital display with back light gives exact and clearly reading although you stay at the somber conditions.
3. It will save time and expense by monitoring dryness and helps to prevent deterioration & decay caused by moisture whilst in storage, therefore processing will be more convenient and efficient.
4. The moisture meter operates by electrical resistance and has automatic temperature compensation.
5. Manual off at any time .Auto power off after 5 minutes from last operation.
6. Data hold function. Low battery alert.

Specifications:
1. Display:4 digital LCD
2. Measuring range :0-80%
3. Operating conditions: Temperature:0-60°C; Humidity:5%-90%RH
4. Resolusion:0.1
5. Accuracy: ± 0.5%n
6. Operation: Electrical Resistance Method, Automatic temperature Compensation
7. Power supply: 4x1.5 AAA size (UM-4) battery
8. Dimensions: Main Unit 140 x 60 x 22mm; Sensor: 72 x 40 x 20mm
9. Weight: 175g (not including batteries)
10. Material codes: 3 kinds

                                     
Paper Moisture Meter MS7200+   
Paper moisture meter MS7200+ is used for measuring moisture content of paper tube, carton, paper, cardboard and other paper relevant materials. It applicable of woodwork, paper making , flake board, furniture ,building, timber traders and other relevant industry.

FEATURES:
1. It is portable, compact, easy to use and the moisture measurement readings are instant.
2. Digital display with back light gives exact and clearly reading although you stay at the somber conditions.
3. It will save time and expense by monitoring dryness and helps to prevent deterioration & decay caused by moisture whilst in storage, therefore processing will be more convenient and efficient.
4. The moisture meter operates by electrical resistance and has automatic temperature compensation.
5. Manual off at any time. Auto power off after 5 minutes from last operation.
6. Data hold function. Low battery alert.

SPECIFICATIONS:
1. Display: 4 digital LCD
2. Measuring range: 0-95%
3. Operating conditions: Temperature: 0-60°C; Humidity: 5%-85%RH
4. Resolution: 0.1
5. Accuracy: ± 0.5%n
6. CODE: CD00: General Material
CD01: Hard cardboard, Carton
CD02: bundles of waste paper
CD03: paper canister, paper tube
CD04: High hygroscopic material

                                     
Grains Moisture Meter WILE 55             
Wile 55 is the best selling moisture meter. It can measure a wide range of moisture, Grain 8~35% and Oil Seeds 5~25 %. Wile 55 is the basic tool for precise quick measurement of grain moisture. It has an easy-to-read LCD display. The user can adjust calibration to match the readings with another meter.
Wile 55 has an automatic temperature compensation that utilises the internal temperature sensors for both grain and the temperature of the device itself.


Technical Data
1. Pre-calibrated for 16 crops covering all the main areas.
2. Only need about 5 seconds to test.
3. Measurement range:
• Grain 8–35 %
• Corn 8-41 %
• Oilseeds 5–25 %
4. Accuracy: +/-0.5% humidity in normal conditions

Benefits of the Wile 55
- Capacitive measurement method
- Measures whole grain samples - no need to grind down samples
- Automatic temperature compensation so accurate even with warm grain
- Average calculation of multiple measurements
- Scale can be adjusted to match the oven test/commercial grain elevators
- Measurement by pushing a single button
- Easy to read numeric display
- Quick guide on the side sticker
- Automatic power off

                                     
Grains Moisture Meter WILE 65             
Wile 65 pre-programmed with 16 grains
1. Wheat: 8-35% 2. Corn: 8-35% 3. Barley: 8-35% 4. Oats: 8-35% 5. Canola: 5-25% 6. Rice: 8-35% 7. Sorghum: 8-30% 8. Lupin: 8-35% 9. Triticale: 8-35% 10. Linseed: 5-25% 11. Soya beans: 5-25% 12. Oil Seed Sunflower: 4-35% 13. Green Lentil: 8-25% 14. Red Lentil: 8-35% 15. Field Pea: 8-35% 16. Desi Chickpea: 8-25%
*Charts available for non-programmed grains

Technical Data
1. Microprocessors-controlled measurement of whole grain, kernels & seeds
2. Alphanumeric display in user's own language
3. External temperature probe Wile-651 as an option
4. Moisture % for 16 grains and seeds
5. Wide range of moisture: Grain 8...35%, Oil Seeds 5...25%
6. Accuracy: ±0,5% moisture at storage condition
7. User can adjust calibration to "match" commercial meter
8. Automatic temperature compensation
9. Stores test results and displays average reading

Quick and easy to us.
Measurement with the Wile 65 is simple and fast. The meter is operated with the use of two buttons and it has an easy to read display that guides you while doing the measurements. The display shows the grain type and helps you make the possible settings before measurement. A quick reference guide is located on the side of the meter to remind you of the basic steps in measuring grain.
The meter is ready for measurement after the correct grain type is selected. Measurement is done by simply filling the test cell with grain, compressing it by the help of the cap of the meter and pressing the test button. Testing is extremely quick and easy. The Wile 65 always shows the temperature of the grain sample and it has an outlet for the additional external temperature probe (W-651)
that can be used for various temperature measurements from grain, silage, compost and other substances. When using the external temperature probe the result is shown in large numbers on the display.

                                     
Coffee and Cocoa Moisture Meter WILE CC             
Applications:
Moisture Meter for Robusta & Arabica coffee plus Cocoa Beans.

Features and Specifications:
1. Use Wile Coffee moisture tester when you need quick and reliable information about the moisture content in coffee and cocoa beans.
2. Includes scales for: arabica, robusta, roasted coffee, parchment coffee, cocoa beans.
3. Clear display with easy to see number
4. Easy to adjust calibration
5. Automatic temperature compensation
6. Calculates average values
7. Accuracy +/- 0.5%
8. Moisture range from 1% to 38% dependent on bean type.

                                     
Grain Moisture Tester GM001                                  
Specifications
1.Grain Moisture meter for rice, wheat, corn, soybean, rapeseed etc.
2.LCD display
3.Automatic weighing, temperature compensation
Features:
-Quick, accurate, convenient
-AC/DC power supply compatible
-High-brightness backlight LCD, clear and energy-saving
-Multi point calibration, error correction
-Low power consumption, automatic shutdown
-Automatic weighing and temperature compensation
-Volume-weight conversation display
Measuring objectives: foodstuff, and other non-metal granular sample, such as rice grain, wheat, corn, soybean and rape seed etc.
Technical data:
-Measuring error: less than +/- 0.5%
-Repetitive error: less than 0.2%
-Measuring range:0-40%
-Measuring time: less than 10 seconds
-Environmental temperature: 0-40C
-Power supply: four 5#alkaline batteries or external 9V DC.
-Display model: high-brightness backlight LCD
-Net weight: 910gm
Packaging Detail: Each piece packed in aluminium alloy box and 4pc/ctn,65.5*43*41=0.12CBM 14.5Kgs/GW, 12Kgs/NW.

                                     
Grain Moisture Tester GM002                                  
Specifications
1.Grain Moisture meter for Japonica Paddy (P1); Bean (P2); Wheat (P3); Rapeseed (P4); Maize (P5); Barely (P6); Long grained Nonglutinous Paddy (P7); Rice (P8); Bean Residue (P9); Peanut (P10); Rapeseed Residue (P11); Granule Feedstaff (P12), Sunflower Seed (P13); Watermelon Seed (big) (P14); Watermelon Seed (small) (P15); Radish Seed (P16); Black Sesame (P17); Yellow Sesame (P18); Cotton Seed (P19); Cotton Residue (P20).
2.LCD display
3.Automatic weighing, temperature compensation
Features:
-Quick, accurate, convenient
-AC/DC power supply compatible
-High-brightness backlight LCD, clear and energy-saving
-Multi point calibration, error correction
-Low power consumption, automatic shutdown
-Automatic weighing and temperature compensation
-Volume-weight conversation display
Measuring objectives: foodstuff, and other non-metal granular sample, such as rice grain, wheat, corn, soybean and rape seed etc.
Technical data:
-Measuring error: less than +/- 0.5%
-Repetitive error: less than 0.2%
-Measuring range:3-35%
-Measuring time: less than 10 seconds
-Environmental temperature: 0-40C
-Power supply: four 5#alkaline batteries or external 9V DC.
-Display model: high-brightness backlight LCD
-Net weight: 700g
Packaging Detail: Each piece packed in aluminium alloy box and 2pc/ctn

                                     
Hazelnut Moisture Tester GM005H                                  
Specifications
1.Special designed for hazelnut moisture, it can test both Hazelnut in shelled and unshelled.
2.LCD display
Features:
-Quick, accurate, convenient
-AC/DC power supply compatible
Technical data:
-Measuring error: less than +/- 0.5%
-Repetitive error: less than 0.2%
-Measuring range:3-35%
-Measuring time: less than 10 seconds
-Environmental temperature: 0-40C
-Power supply: AA alkaline batteries or external 6V DC.

                                     
Grains Moisture Tester GM005                                  
Specifications
1.Designed for 20 kinds of grains moisture.
2.LCD display
Features:
-Quick, accurate, convenient
-AC/DC power supply compatible
Technical data:
-Measuring error: less than +/- 0.5%
-Repetitive error: less than 0.2%
-Measuring range:3-35%
-Measuring time: less than 10 seconds
-Environmental temperature: 0-40C
-Power supply: AA alkaline batteries or external 6V DC.

Code Table: P1: Japonica Rice; P2: Soybean; P3: Wheat; P4: Rapeseed; P5: Corn; P6: Barley; P7: Indica Rice; P8: Rice; P9: Large corn; P10: White wheat; P11: Peanut kernel, P12: Sorghum; P13: Black sesame; P14: Sunflower seed; P15: Watermelon seed; P16: Cotton seed; P17: Soybean meal; P18: Cotton seed meal; P19: Rapeseed meal; P20: Pellet feed; P21-24 Optional.
                                     
Grain Moisture Tester GM006                                  
Specifications
1.Test for 14 kinds of grains, Wheat, Maize, Japonica rice, Indica rice, Soybean, Rice, Sorghum, Rapeseed, Millet, Peanut, Barley, Sunflower seed, Coffee bean, Cocoa bean.
2.LCD display
3.Automatic temperature compensation with temperature display.
Features:
-Quick, accurate, convenient
-Multi point calibration, large range error correction
-Low power consumption
-Automatic weighing and temperature compensation
Technical data:
1. Measuring Range: 3%-40%
2. Adjust Range: -9.9% ~ +9.9%
3. Accuracy: 0.5%
4. Repeat Error: 0.2%
5. Working Temperature: 0 ~ 40ºC
6. Automatic Temperature Compensation
7. Battery: 9V (6F22)
8. Auto off: 3 minutes.

                                     
Grain Moisture Tester GM010                                   MANUAL  
Specifications
1.Grain Moisture meter for rice, wheat, corn, soybean, rapeseed etc.
2.LCD display
3.Automatic weighing, temperature compensation
Features:
-Quick, accurate, convenient
-AC/DC power supply compatible
-High-brightness backlight LCD, clear and energy-saving
-Multi point calibration, error correction
-Low power consumption, automatic shutdown
-Automatic weighing and temperature compensation
-Volume-weight conversation display
Measuring objectives: foodstuff, and other non-metal granular sample, such as rice grain, wheat, corn, soybean and rape seed etc.
Technical data:
-Measuring error: less than +/-0.5%
-Repetitive error: less than 0.2%
-Measuring range:0-40%
-Measuring time: less than 10 seconds
-Environmental temperature: 0-40C
-Power supply: four 5#alkaline batteries or external 9V DC.
-Display model: high-brightness backlight LCD
-Net weight: 910gm
Packaging Detail: Each piece packed in aluminium alloy box and 4pc/ctn,65.5*43*41=0.12CBM 14.5Kgs/GW, 12Kgs/NW.

                                     
Plier Type Grain Moisture Meter GM011   
Features:
GM011 is a fast grain moisture meter, with plier type sensor, automatic temperature compensation, it can measure the moisture quickly and accurately. it can test 7 different grains.
Specifications:
1. Grain Species: Wheat, Maize, Soybean, Rapeseed, Rice, Japonica Rice, Indica Rice
2. Moisture Range: Wheat: 8%~24%; Maize: 8.2%~25%; Soybean: 5.7%~24%; Rapeseed: 2.5%~17%; Rice: 8.5%~24.5%; Japonica Rice: 8%~25%; Indica Rice: 7.5%~25%
3. Accuracy: ±0.5%
4. Battery: C type (2#) battery, 1.5V*4
5. Size of packing: 29x18x6.5cm
6. Weight: 2kg

                                     
Low Range Grain Moisture Meter GM012   
Features:
GM012 is a fast grain moisture meter, with bucket type sensor, automatic temperature compensation, it can measure the moisture quickly and accurately. it can test 7 different grains.
Specifications:
1. Grain Species: Wheat, Maize, Soybean, Rapeseed, Sorghum, Japonica Rice, Indica Rice
2. Moisture Range: Wheat: 8%~24%; Maize: 8%~25%; Soybean: 6%~22%; Rapeseed: 3%~16%; Sorghum: 7.5%~24.5%; Japonica Rice: 8%~23.5%; Indica Rice: 7.4%~24.5%
3. Accuracy: ±0.5%
4. Battery: C type (2#) battery, 1.5V*4
5. Size of packing: 29x18x6.5cm
6. Weight: 2kg

                                     
High Range Grain Moisture Meter GM015   
Features:
GM015 is a fast grain moisture meter, with bucket type sensor, automatic temperature compensation, it can measure the moisture quickly and accurately. it can test 7 different grains.
Specifications:
1. Grain Species: Wheat, Maize, Soybean, Rapeseed, Sorghum, Japonica Rice, Indica Rice
2. Moisture Range: Wheat: 8%~40%; Maize: 8%~48%; Soybean: 6%~35%; Rapeseed: 3%~34%; Sorghum: 6%~37%; Japonica Rice: 8%~40%; Indica Rice: 7%~37%
3. Accuracy: ±0.5%
4. Battery: C type (2#) battery, 1.5V*4
5. Size of packing: 29x18x6.5cm
6. Weight: 2kg

                                     
Digital Grain Moisture Meter MC-7825G    Manual
Application: used for fast and accurate measurement of moisture and temperature in the process of allotment, acquisition, storage, machining of packed grains, feedstuff, powder, especially for grains.
Measuring range: please see the table below
Resolution: 0.1
Display: LCD display
Accuracy: ±(0.5%n+0.1)
PC interface: RS232C (Software & communicating cable are optional)
Auto power off
Power supply: 4x1.5V AAA (UM-4) battery
Battery indicator: low battery indicator
Dimensions: 165x62x26mm
Weight (not including probe):119g

Test code and grain species
code
grain
range
code
grain
range
code
grain
range
cd01
Wheat/Rye (Whole)
7-31
cd13
Coffee (Whole)
7-31
cd25
Flax (Whole)
5-21
cd02
Wheat/Rye (Ground)
7-29
cd14
Coffee (Ground)
7-26
cd26
Peas (Progreta) (Ground)
5-21
cd03
Paddy (Whole)
7-29
cd15
Coffee Green
(Ground)
7-27
cd27
Peas (Ground)
7-27
cd04
Paddy (Ground)
7-26
cd16
Cocoa Beans
(Whole)
4-13
cd28
Ground nuts Hulled (Whole)
5-13
cd05
Rice (Milled)
7-29
cd17
Linseed (Whole)
6-21
cd29
Grass Seed/Rye grass (Whole)
7-28
cd06
Semolina
7-25
cd18
Lentils (Ground/ Whole)
7-21
cd30
Grass Seed /Cocksfoot (Whole)
6-23
cd07
Maize/Corn
(Whole)
7-27
cd19
Oilseed Rape
(Ground)
5-26
cd31
Flour/Soft Wheat
7-29
cd08
Maize/Corn
(Ground)
7-26
cd20
Mustard Seed
(Whole)
7-21
cd32
Clover/White Seed
(Whole)
6-24
cd09
Soya Beans
(Whole)
6-28
cd21
Sorghum/Milo
(Whole)
7-28
cd33
Clover/Red Lucerne Seed (Whole)
6-22
cd10
Soya Beans
(Ground)
5-22
cd22
Sorghum/Milo
(Ground)
7-26
cd34
Buckwheat (Ground)
7-29
cd11
Barley/Oats
(Whole)
7-34
cd23
Sunflower seed
(Whole)
5-25
cd35
Brassicas/Brussels Sprout (whole /ground),Cabbage seed
5-15
cd12
Barley/Oats
(Ground)
7-29
cd24
Sugarbeet Seed
(Whole)
6-20
cd36
Beans/Tic/Winter (Ground)
5-15
                                     
Digital Grain Moisture Meter MC-7828G   
Features:
1. Able to measure grains up to 22 species.
2. The cup type measurement causes small error.
3. Wide measuring range.
4. With storage and statistical functions. Can store 240 groups of measurements.
5. Two presentations, digital display and color coded LED indication.
6. Use the exclusive Micro-computer LSI circuit and crystal time base to offer high accuracy measurement. It can obtain automatically the temperature corrected moisture value.
7. Use USB data output and RS-232 data output to connect with PC.
8. Provide Bluetooth data output choice.
Specifications:
1. Grains: 22 Species
2. Measuring Range: 0~50%
3. Accuracy: ±0.5n%+0.5
4. Resolution: 0.1
5. Display: 4 Digits, 10mm LCD, With Color Coded LED Indicator
6. LED Indicator: Green LED represents a safe, air-dry state; Yellow LED represents a borderline state; Red LED represents a damp state
7. Calibration: Automatic
8. Battery Indicator: Low Battery Indicator
9. Data Output: USB, RS-232, Bluetooth (Optional)
10. Operating Conditions: Temperature: 0~50°C, Humidity: <90%RH
11. Power Supply: 4 x 1.5V AAA Size (UM-4) Battery
12. Dimensions: Unit: 150 x 65 x 30mm; Sensor: 175 x 76 x 76mm
13. Weight: 690g (Not Including Batteries)
  Code   Grain   Range %

  Cd01   Japonica Rice   0~50
  Cd02   Soya Beans   0~35
  Cd03   Wheat   0~50
  Cd04   Rapeseed   0~35
  Cd05   Corn   0~50
  Cd06   Barley   0~50
  Cd07   Indica Rice   0~50
  Cd08   Rice   0~50
  Cd09   Bean Pulp   0~50
  Cd10   Peanut   0~50
  Cd11   Rapeseed Meal   0~50
  Cd12   Granulated Feed   0~50
  Cd13   Sunflower Seed   0~35
  Cd14   Watermelon Seed   0~30
  Cd15   White Wheat   0~50
  Cd16   Sorghum   0~50
  Cd17   Black Sesame   0~45
  Cd18   Northeast Corn   0~50
  Cd19   Cottonseed   0~50
  Cd20   Cottonseed Meal   0~50
  Cd21   Coffee Beans   0~45
  Cd22   Cocoa Beans   0~40
                                     
Digital Grain Moisture Meter MC-7821     
Application: used for fast and accurate measurement of moisture and temperature in the process of allotment, acquisition, storage, machining of packed grains, feedstuff, powder.
Measurement range: moisture content 8-30%; Temperature: –10-55℃
Resolution: 0.1
Accuracy: Moisture: ±0.6%(UNDER 14%);±0.8%(15%-18%);±1(OVER 18)
              TEMP: ±0.8℃
Grains: paddy, rice, corm, wheat
Calibration: automatic
Power supply: 4x1.5V AA (UM-3) battery
Dimensions: 182x68x38mm
Probe: 368x44x25mm
Weight (not including probe):334g

                                     
Grain Moisture meter MD7822            
Adoption of CPU makes the measurement more accurate. Temperature self-compensation.
A big screen LCD with back lighting to ensure the reading is clear and free from parallax.
Special energy saving backlight control.
Grains that can be tested with the meter: wheat, paddy, rice and corn.
Moisture measurement range: 2%~30%
Resolution: 0.5%
Temperature measurement range: -10~60°C(14~140°F)
Maximum error: ±2°C(±4°F)
Resolution: 1°C(2°F)
Ambient temperature: -10~40°C(14~104°F)
Ambient humidity: 0~70%Rh
Date hold and can hold value.
Low power symbol automatic indicating.
Battery: 4x1.5V AA battery
Dimensions: 174L×73W×38Hmm (for main unit); 365Lx43Wx25Hmm (for measurement probe)
                                     
Grain Moisture meter AMF039           
Functional and technical parameters
Measuring range: 5% -30% moisture, temperature -10°C-60°C
Maximum error: Moisture ±(1% Rh = 0.5), temperature ±2.5°C (±5°F)
Resolution: 0.5% moisture, temperature 0-85% Rh
Operating environment: temperature 0°C-40°C / Humidity 0.1-85% Rh
Grain varieties to choose: √
Grain moisture test: √
Food temperature test: √
Grain moisture standard setting and excessive moisture Tip: √
Backlight control function: √
Celsius, Fahrenheit temperature unit conversion: √
Battery hold function: √
Auto power off function: 5 minutes without any operation automatic shutdown
Data hold function: √
Size: Host: 72 * 35 * 145mm; Probe: 415 * 36 * 36mm
Weight: Host: 190.6g, probe: 208.3g
Power: 3 * 1.5VAAA battery

                                     
WOOD Moisture Meter MD010           
Specifications:
Range: 0~99.9%
Resolution: 0.1%
Accuracy: +-0.5%
Electrode length: 10mm (0.4")
Electrode pins: Integrated
Auto power off
Dimensions: 145 x 67 x 32mm
Weight: 200g
Measurement principle: Electrical resistance

Wood Group:
A: Teak, Walnut, Afrormosia, Rubber Tree, Imbuia, Kokrodua, Niove Bidinkala, Cork
B: Keruing, White Poplar, Beech, Cedar, Tola
C: Lauan, Ash, Elm, Fir, Maple, Padauk, Oak, Cherry
D: Basswood, Larch, Pine, Birch

                                     
WOOD Moisture meter MD-2G+           
Measuring Range: 5%~40%
Resolution: 1%
Battery: A 9V battery
Dimensions: 126×70×29mm
Data Hold, contact by 2 pins

                                     
WOOD Moisture meter MD-2G (2 pins) MD-4G (4 pins)            
Digital large size LCD display
Data-Hold function for holding measuring values
Ranges: 5% to 40%
Resolution: 1%
Accuracy: ±1%
Power: one 9V battery (6F22)
Dimension: 126x70x29(mm)
Weight: approx. 150g (including battery)
Operation temperature:0℃ to 40℃(32℉ to 104℉)

                                     
PAPER Moisture meter MD-6G           
Digital intelligent MCU paper moisture meter can work on 3 types paper (carton, copperplate paper, writing paper) through the spring contact precise measuring.
Display: Large LCD display
Range: 0-40%
Resolution: 1%
Operation temperature: 0℃~50℃ 20~90%RH
Battery consumption: approx.7.5mA
Power: 9V battery
Dimension: 126×70×29mm
Weight: Approx.82g(exclude the battery

                                     
WOOD Moisture meter MD812 (2 Pins)      
Digital large size LCD display
Measuring Range: 5%~40%
Accuracy: 1%
Date hold and can hold value
Battery: one 9V battery
Low power indicating and can select in
2pins sensor or 4pins sensor.
Can change the testing sensor pins
conveniently dispense with the plastic.
Dimension: 130Lx64Wx32H(mm)
                                     
WOOD Moisture meter MD814 (4 Pins)     
Digital large size LCD display
Measuring Range: 5%~40%
Accuracy: 1%
Date hold and can hold value
Battery: one 9V battery
Low power indicating and can select in
2pins sensor or 4pins sensor.
Can change the testing sensor pins
conveniently dispense with the plastic.
Dimension: 130Lx64Wx32H(mm)
                                     
Textile Moisture Meter MS310                  
FEATURES
1.1.It is portable, compact, easy to use and the moisture measurement readings are instant.
1.2.Digital display with back light gives exact and clearly reading although you stay at the somber conditions.
1.3.It will save time and expense by monitoring dryness and helps to prevent deterioration & decay caused by moisture whilst in storage, therefore processing will be more convenient and efficient.
1.4.The moisture meter operates by electrical resistance and has automatic temperature compensation.
1.5.Manual off at any time .Auto power off after 5 minutes from last operation.
1.6 Data hold function. Low battery alert.
 
SPECIFICATION
Display:4 digital LCD
Measuring range :0-99%
Operating conditions:
         Temperature:0-60°C
         Humidity:5%-90%RH
Resolution:0.1
Accuracy: ± 0.5%n
Power supply:
         4x1.5 AAA size (UM-4) battery
Dimensions:
          140mm×60mm×22mm
Weight:
          119g (not including batteries)
Code choice:20 kinds
 

                                     
Textile Moisture Meter MS-C                  

 

Features:
It is portable, compact, easy to use and the moisture measurement readings are instant.
Digital display with back light gives exact and clearly reading although you stay at the somber conditions.
It will save time and expense by monitoring dryness and helps to prevent deterioration & decay caused by moisture whilst in storage, therefore processing will be more convenient and efficient.
The moisture meter operates by electrical resistance and has automatic temperature compensation.
Manual off at any time .Auto power off after 5 minutes from last operation.
Data hlold function. Low battery alert.
 
Specification
Display:4 digital LCD
Measuring range :
4-90%(CD01)
Operating conditions:
         Temperature:0-60
         Humidity:5%-90%
Resolusion:0.1
Accuracy: ± 0.5%n
Power supply:
4x1.5 AAA size (UM-4) battery
Dimensions:
140mm×60mm×22mm
Weight:
119g (not including batteries)
 
                                     
Textile Moisture Meter DM200T                  
Features:
Its integrative design convenient to carry outside for testing.
Digital display with back light gives exact and clearly reading although you stay at the somber conditions.
It is small in size, light in weight ,easy to carry out for fieldwork if needed.
Manual off at any time.
 
Specification
Display:4 digital LCD
Measuring range :
0-2%
0-90%
Measuring condition:
Temperature:0-60°C
Humidity:5%-90%RH
Resolusion:0.1 or 0.01
Accuracy: ± 0.5%n
Power supply:
9V  battery (6F22)
Dimensions:
160mm×60mm×25mm
Weight:203g (not including batteries)

 

                                     
Moisture meter MD816                  
Digital LCD screen
Low power consumption
Auto indication of low voltage
Scope of Moisture Measurement: 5~40%
Resolution: 1%
Operating Ambient: -15°C~35°C, 20~90%Rh
Power Supply: 23A 12V alkaline battery
Dimensions: 85L×40W×16H(mm)
 

                                     
Moisture meter MD818                 
The meter is a miniature intelligent wood moisture meter adopting pin contact mode, suitable for measuring water content in wooden fiber articles such as wooden and bamboo objects, cotton, tobacco, paper and Chinese medical materials, etc.
* Adopts micro computer (CPU) technology, realizing rapid and accurate measurement.
* Digital LCD screen
* Ambient temperature compensation
* Concise and delicate fashionable appearance
* Wide measurement scope (5%--60%)
* Low power consumption, high resolution (0.5%)
* Auto indication of low voltage
 

                                     
WOOD Moisture meter MD912            
Double color pocket size meter,
autocorrect environmental temperature,
and could select 4 species of the wood test.
Measuring Range: 2%~60%
Resolution: 0.5%
Date hold and can hold value.
Low power indicating and can select in
2pins sensor or 4pins sensor
Can change the testing sensor pins
conveniently dispense with the plastic.
Battery: one 9V battery
Dimension: 130Lx64Wx32H(mm)

                                     
WOOD Moisture meter MD914             
Double color pocket size meter,
autocorrect environmental temperature,
and could select 4 species of the wood test.
Measuring Range: 2%~60%
Resolution: 0.5%
Date hold and can hold value.
Low power indicating and can select in
2pins sensor or 4pins sensor
Can change the testing sensor pins
conveniently dispense with the plastic.
Battery: one 9V battery
Dimension: 130Lx64Wx32H(mm)

                                     
Paper Moisture meter MD916             
It is used the microcomputer (CPU) technique to measure quickly, accurate.
Digital intelligent MCU paper moisture meter can work on 4 types paper (carton, copperplate
paper, writing paper, newsprint) through the spring contact.
Precise measuring.
Digital large size LCD display
Test Range: 2%~40%
Accuracy: 0.5%
Date hold and can hold value
Low power symbol automatic indicating.
Battery: one 9V battery
Dimension: 130Lx64Wx32H(mm)
                                     
Wood Moisture meter AMF037             
*Measuring Range: 2~40%/50%/60%/70%
*Resolution:0.5%
*Temperature Range:-10~60℃
*Humidity Range:20%~90%RH
*Moisture Response Speed:<1s
*Measuring Error:±1%
*Display: LCD
*Power:2*1.5V AAA Battery

                                     
Wood Moisture meter AMF038             
*Measuring Range: 2~40%/50%/60%/70%
*Resolution: 0.5%
*Temperature Range: -10~60℃
*Humidity Range: 20%~90%RH
*Moisture Response Speed: <1s
*Measuring Error: ±1%
*Display: LCD
*Power: 2*1.5V AAA Battery

                                     
Concrete Moisture Meter DM200C             
Features:
Its integrative design convenient to carry outside for testing.
Digital display with back light gives exact and clearly reading although you stay at the somber conditions.
It is small in size, light in weight ,easy to carry out for fieldwork if needed.
Manual off at any time.
 
Specification
Display:4 digital LCD
Measuring range :
0-2%
0-90%
Measuring condition:
Temperature:0-60°C
Humidity:5%-90%RH
Resolusion:0.1 or 0.01
Accuracy: ± 0.5%n
Power supply:
9V battery (6F22)
Dimensions:
160mm×60mm×25mm
Weight:203g (not including batteries)
 

                                     
Concrete Moisture Meter MS300             
 

1.Features:

1.1.It is portable, compact, easy to use and the moisture measurement readings are instant.
1.2.Digital display with back light gives exact and clearly reading although you stay at the somber conditions.
1.3.It will save time and expense by monitoring dryness and helps to prevent deterioration & decay caused by moisture whilst in storage, therefore processing will be more convenient and efficient.
1.4.The moisture meter operates by electrical resistance and has automatic temperature compensation.
1.5.Manual off at any time .Auto power off after 5 minutes from last operation.
1.6 Data hold function. Low battery alert.
1.7 Can testing 10 kinds of materials with different  codes.
 
Specification
Display:4 digital LCD
Measuring range :0-70%
Operating conditions:
         Temperature:0-60°C
         Humidity:5%-90%RH
Resolusion:0.1
Accuracy: ± 0.5%n
Operation:
         Electrical Resistance Method, Automatic temperature Compensation
Power supply:
         4x1.5 AAA size (UM-4) battery
Dimensions:
         Main Unit 140mm×60mm×22mm
Weight:
         120g (not including batteries)
Materials:10  kinds.
 

                                     
Soil moisture Meter PMS710             

 

 
Features
1.1.It is portable, compact, easy to use and the moisture measurement readings are instant.
1.2.Digital display with back light gives exact and clearly reading although you stay at the somber conditions.
1.3.It will save time and expense by monitoring dryness and helps to prevent deterioration & decay caused by moisture whilst in storage, therefore processing will be more convenient and efficient.
1.4.The moisture
1.5.Manual off at any time .Auto power off after 5 minutes from last operation. 
1.6.Data hold function.
1.7.Low battery alert.
 
Specification
Display:4 digital LCD
Measuring range :0-50%
Operation condition:
         Temperature:0-60°C
         Humidity:5%-90%RH
Resolusion:0.1
Accuracy:
         ± 2%n(Non- saturation condition)
Power supply:
          4x1.5 AAA size (UM-4) battery
Dimensions:
         Main Unit:140mm×60mm×22mm
         Needle:280mm 
Weight:210g (not including batteries) 
 

                                     
Inductive Concreter Wall Moisture meter MD917             
This is a precision instrument adopting HF electromagnetic waves to measure the moisture content ratio without damaging the object under test. It can be set depending on different building material to raise its measurement accuracy. With Automatic Temperature Compensation (ATC); Setting of upper limit of moisture content ratio, prompting of overrunning.
Measuring Range: 0~40%, Accuracy: +-1%
Resolution: 0.5%
Battery: 3x1.5V AAA alkaline battery
Weight:  95g

                                     
Inductive Wood Moisture meter MD918             
Make inductive measurement of the moisture content of wood using the high-frequency electromagnetic waves.
10 grades of wood density available.
It has the functions of setting the moisture upper limit and warning.
Automatic compensation for environmental temperature.
Measuring Range: 4%~80%
Resolution: 0.5%
Battery: 3x1.5V AAA alkaline battery
Dimension: 132Lx67Wx26H(mm)

                                     
Inductive Wood Moisture meter AMF041             
Make inductive measurement of the moisture content of wood using the high-frequency electromagnetic waves.
1. 8 grades of wood density (from 0.27~1.05g/cm³) available.
2. It has the functions of setting the moisture upper limit and warning.
3. Automatic compensation for environmental temperature.
4. Measuring Range: 0~50%, Temperature: 0-50°C(32-122°F)
5. Resolution: 0.5%, Tempe: 0.1°C
6. Detection Depth: 0-50mm
7. Battery: 9V battery
8. Dimension: 64*31*126mm
9. Weight: 146g

                                     
Inductive Paper Moisture meter MD919            
Make inductive measurement of the moisture content of paper using the high-frequency electromagnetic waves.
4 grades of paper density available.
It has the functions of setting the moisture upper limit and warning.
Automatic compensation for environmental temperature.
Measuring Range: 4%~40%RH
Resolution: 0.5%
Battery: 3x1.5V AAA alkaline battery
Dimension: 132Lx67Wx26H(mm)
Can indicate the environmental moisture

                                     
Wood Moisture meter MD7820            
Double color pocket size meter, autocorrect environmental temperature, and could select 4 species of the wood test.
Moisture measuring Range: 2%~40%,2%~50%, 2%~60%,2%~70%, Resolution: 0.5%
Temperature measuring Range:-10~60°C(14~140°F)
Accuracy: ±2°C(±4°F)
Resolution: 1°C(2°F)
Date hold and can hold value.
Low power symbol automatic indicating.
Battery: 4x1.5V AA battery
Dimensions: 174L×73W×38Hmm (for main unit); 180Lx43Wx25Hmm (for measurement probe)

                                     
Meat Moisture meter DM300R            
Features:
1. It is portable, compact, easy to use and the moisture measurement readings are instant.
2. Digital display with back light gives exact and clearly reading although you stay at the somber conditions.
3. It will save time and expense by monitoring dryness and helps to prevent deterioration & decay caused by moisture whilst in storage, therefore processing will be more convenient and efficient.
4. This instrument adopted the high frequency principle based on the introduction of the most advanced technology from foreign country.

Specifications:
1. Tested meat: pork, beef, lamb, chicken, etc.
2. Measurement range: 10% to 85%
3. Sampling time: <2s
4. Measurement error in the range 70~78%: <1.0%
5. Repeatability in the range 70~78%: <0.5%
6. Power: 9V (6F22 battery)
7. Power consumption: about 45mW
8. Instrument Dimension: about 180*50*28mm
9. Display: 3 LCD (with back light)
10. Operating temperature: -5~60C
11. Operating Humidity: <90% RH

                                     
 Skin Moisture Meter FCM-1             
This skin moisture meter is a high precision skin moisture meter which by using bio-electrical impedance analysis techonology, it is helpful assistand to guide you do the correct nursing and maintence for skin.
Specifications:
1. Measure Range: 0-99.9%
2. Accuracy: ±2%
2. Continous testing: 1-99 times
3. Size: 177*387.7*33mm
4. Weight: 53g
5. Auto off after 60s.

                                     
 Skin Moisture Meter FCM-2             
This skin moisture meter is a new upgrade high precision skin moisture meter which can test both moisture and oil of skin. it is helpful assistant to guide you do the correct nursing and maintenance for skin.
Specifications:
1. Measure Range: 0-99.9%; Oil: 0~99.99%
2. Accuracy: ±2%
3. Sensor: platium
4. Size: 128*26*34mm
5. Moisture low alarm
6. Memory function

                                 
Digital Temperature Humidity Meter HT-6290          
Application: widely used in workshops, offices, plants, libraries, computer stations, laboratories and warehouses.
Product info: separate sensor
Measuring range: humidity: 0-100%; TEMP: –10-65℃
Resolution: 0.1
Accuracy: humidity: 2.5%±1%RH; TEMP: ±0.5℃
Power supply: 4x1.5V AA (UM-3) battery
Dimensions: 160x68x32mm
Weight (not including probe):202g

                                  
Digital Humidity Meter HT-6830          
Application: widely used in workshops, offices, plants, libraries, computer stations, laboratories and warehouses.
Product info: in built sensor
Measuring range: humidity: 0-95%; TEMP: –10-65℃
Resolution: 0.1
Accuracy: humidity: 2.5%±1%RH; TEMP ±0.5℃
Power supply: 4x1.5V AA (UM-3) battery
Dimensions: 210x77x40mm
Weight (not including probe):215g

                        
Water Activity Moisture Meter MS2100 (with software). MS2100S (without software)        
Water activity (aw) is a measurement of the energy status of the water in a system. The value indicates how tightly water is “bound,” structurally or chemically, within a substance. Water activity is the relative humidity of air in equilibrium with a sample in a sealed chamber. The concept of water activity is of particular importance in determining product quality and safety. Water activity influences color, odor, flavor, texture and shelf-life of many products. It predicts safety and stability with respect to microbial growth, chemical and biochemical reaction rates, and physical properties.

Features:
MS2100 is one full function industrial instrument, equiped with different sensor, it can test air, liquid, gas, solid moisture value.
Specifications:
1. Water Activity:
1) Range: 0-1.00aw
2) Accuracy: +-0.2aw
3) Repeatability: +-0.015aw
4) Resolution: 0.001aw
2. Moisture:
1) Range: 0-100% RH
2) Accuracy: +-2%FS
3) Repeatability: +-0.5abs
4) Resolution: 0.1%
5) Working temperature: -20°C~85°C
3. Explore Class: Class 1, group A/B/C/D; Class II, group E/F/G.
4. Test mode: Smart, Porj, Normal