Thickness gages
                                        
Digital Thickness Meter 101-713 Serials                                     

Features:

1) ON/OFF Switch
2) mm/inch Switch
3) Zero setting
4) Optional ceramic tip to avoid magnetic

Specifications: 101-7130/7134 101-7131/7135 101-7132/7136 101-7133/7137
Order No. Range Resolution Throat depth A Accuracy Note
101-7130 0-12.7mm/0.5" 0.01mm/0.005" 30mm ±0.02mm Stainless Steel Tip
101-7131 0-12.7mm/0.5" 0.01mm/0.005" 60mm ±0.02mm Stainless Steel Tip
101-7132 0-12.7mm/0.5" 0.01mm/0.005" 120mm ±0.02mm Stainless Steel Tip
101-7133 0-20.00mm/1" 0.01mm/0.005" 120mm ±0.02mm Stainless Steel Tip
101-7134 0-12.7mm/0.5" 0.001mm/0.0005" 30mm ±0.009mm Stainless Steel Tip
101-7135 0-12.7mm/0.5" 0.001mm/0.0005" 60mm ±0.009mm Stainless Steel Tip
101-7136 0-12.7mm/0.5" 0.001mm/0.0005" 120mm ±0.009mm Stainless Steel Tip
101-7137 0-20.00mm/1" 0.001mm/0.0005" 120mm ±0.009mm Stainless Steel Tip
101-7130C 0-12.7mm/0.5" 0.01mm/0.005" 30mm ±0.02mm Ceramic Tip
101-7134C 0-12.7mm/0.5" 0.001mm/0.0005" 30mm ±0.009mm Ceramic Tip
101-7130S 0-12.7mm/0.5" 0.01mm/0.005" 30mm ±0.02mm Sharp Tip
101-7134S 0-12.7mm/0.5" 0.001mm/0.0005" 30mm ±0.009mm Sharp Tip
                                        
Continuous Thickness Meter With Roller                                    
Features:
1. Equipped with a shock-proof dial indicator.
2. With roller insert, easy for continuous measurements of thickness of strip plates.
3. Measuring inserts close when not used.

Model Range Resolution L (mm) Accuracy
101-7138 Dial 0-10mm 0.01 100 ±20μm
101-7139 Digital 0.01/0.0005"
                                        
Digital Thickness Meter TA202                                     

Features:

1) ON/OFF Switch
2) mm/inch Switch
3) Zero setting
4) Runs on by one 1.5V cell battery

Specifications:
Range: 0-10mm/0.4"
Resolution: 0.01mm/.0005"
Throat depth: 30mm
Accuracy: ±0.03mm
                                        
Mini Digital Thickness Gauge TA203                                     

Features:

1) ON/OFF Switch
2) mm/inch Switch
3) Zero setting at any position
4) Runs on by one 1.5V cell battery

Specifications:
Range: 0-12.7mm/0.5"
Resolution: 0.01mm/0.0005"
Throat depth A: 11mm
Accuracy: ±0.02mm
                                      
Digital Thickness Gauge TA205                                   

Features:

1) ON/OFF Switch
2) mm/inch Switch
3) Zero setting at any position
4) Runs on by one 1.5V cell battery

Specifications:
Range: 0-12.7mm/0.5"
Resolution: 0.01mm/0.0005"
Throat depth A: 11mm
Accuracy: ±0.02mm
                                       
Digital Thickness Gauge TA206                                    

Features:

1) ON/OFF Switch
2) mm/inch Switch
3) Zero setting at any position
4) Runs on by one 1.5V cell battery

Specifications:
Range: 0-25.4mm/1"
Resolution: 0.01mm/0.0005"
Throat depth A: 11mm
Accuracy: ±0.02mm
                                        
Digital Tube Thickness Gauge TA207, TA208                                    

Order Number:

TA207: 0~10mm/0.4"
TA208: 0~25mm/1"

Features:

1) ON/OFF Switch
2) mm/inch Switch
3) Zero setting at any position
4) Runs on by one 1.5V cell battery

Specifications:
Range: 0-10mm/0.4" (TA207), 0-25mm/1" (TA208)
Resolution: 0.01mm/0.0005"
Throat depth A: 11mm
Accuracy: ±0.02mm
                                        
Digital Tube Thickness Gauge TA209                                    

Features:

1) ON/OFF Switch
2) mm/inch Switch
3) Zero setting at any position
4) Large stainless steel tip

Specifications:
Range: 0-15mm/0.6"
Resolution: 0.01mm/0.0005"
Throat depth A: 11mm
Accuracy: ±0.02mm
                                          
Coating Thickness Meter AMT15                                    

Features:

1. Non-magnetic coatings (e.g. paint, zinc) on steel

2. Insulating coatings (e.g. paint) on no-ferrous metals

3. No-ferrous metals coatings on insulating substrates

4. Menu operation system

5. Two measuring mode: CONTINUE and SINGLE mode

6. Two working Mode: DIRECT and GROUP mode

7. Statistic Display: AVG, MAX, MIN, NO., S. DEV

8. One point calibrating, two points calibrating and basic calibrating easily

9. Memory for 400 readings(80 DIRECT and 320 GROUP readings)

10. Delete single readings and all group readings easily

11. High alarm and Low alarm for all working mode

12. Low battery, error indication

13. USB interface for PC software (windows 98/2000/xp/vista)

Specifications:

Sensor probe

F

N

Working principle

magnetic induction

Eddy current principle

Measuring range

0~1250um

0~1250um

Guaranteed tolerance (of reading)

(+/- 3%+1)um

(+/- 3%+1.5)um

Low range Precision

0.1um

0.1um

Minimum curvature radius

1.5mm

3mm

Diameter of Minimum area

3mm

5mm

Basic critical thickness

0.5mm

0.3mm

Size (HxWxD)

113.5mm x 54mm x 27mm

Weight

110g

                                      
Coating Thickness Meter AMT15A                          

Features:

1. Non-magnetic coatings (e.g. paint, zinc) on steel

2. Insulating coatings (e.g. paint) on no-ferrous metals

3. No-ferrous metals coatings on insulating substrates

4. Menu operation system

5. Two measuring mode: CONTINUE and SINGLE mode

6. Two working Mode: DIRECT and GROUP mode

7. Statistic Display: AVG, MAX, MIN, NO., S.DEV

8. One point calibrating, two points calibrating and basic calibrating easily

9. Memory for 400 readings(80 DIRECT and 320 GROUP readings)

10. Delete single readings and all group readings easily

11. High alarm and Low alarm for all working mode

12. Low battery, error indication

13. USB interface for PC software (windows 98/2000/xp/vista)

Specifications:

Sensor probe

F

N

Working principle

magnetic induction

Eddy current principle

Measuring range

0~1300um (0~51.2mils)

0~1300um (0~51.2mils)

Guaranteed tolerance (of reading)

(+/- 3%+2um)

(+/- 3%+2um)

Resolution

0~999um

1um

1um

1000~1300um 0.01mm 0.01mm

Minimum Max curvature radius

1.5mm/25mm

1.5mm/25mm

Minimum Diameter of Minimum area

6mm

6mm

Basic critical thickness

0.5mm

0.3mm

Size (HxWxD)

113.5mm x 54mm x 27mm

Weight

110g

                                      
Mini Film Coating Thickness Meter AMF066                         
Measurement ranges: 0~1.80mm/0~71.0mil
Resolution: 0.01mm/1mil
Measurement error: ±0.03mm
Min. diameter of substrate: 50mm
Min. thickness of substrate: 0.5mm
Power supply: 2*1.5V AAA batteries
Operating temperature range 0~40℃
Operating humidity range: 10~95%RH
Overall dimensions: 61.98*30.57*104.99cm
Weight: 63.98g
Standard Quantity Per Carton: 60PCS
Standard Carton Size: 49.7x 49 x 45.3cm

                                      
Mini Film Coating Thickness Meter AMF067                         
Measurement ranges:0~1800μm/0~70.9mil
Resolution:0.1μm/1μm/1mil
Measurement error:±(3%H+1μm)
Min. diameter of substrate:Φ12mm
Min. thickness of substrate:0.5mm
Min. curvature radius of convex substrate:2mm
Min. curvature radius of concave substrate:11mm
Power supply:2*1.5V AAA batteries
Operating temperature range 0~40℃
Operating humidity range:10~95%RH
Overall dimensions:61.98*30.57*104.99mm
Weight:63.98g
Standard Quantity Per Carton:20PCS
Standard Carton Size:65.9*44*28.9cm

                                      
Film Coating Thickness Gauge AMF021                         
*Measuring range: 0~1800µm
*Accuracy: ±3%H±1µm
*Resolution: 0.1µm (<100µm) or 1µm(>100µm)
*Use Hi-sensibility sensor for precise measurement
*Zero point, two point and basic, three different calibration
*Measuring mode: Single, Continually and Difference
*Data store/ Data recall/ Data delete function
*Data Analysis: Average, Maximum, Minimum, Standard deviation and measuring times
*Beep sound indication
*Measure in Metric/Imperial
*LCD backlight display
*Low battery indication
*Auto power off
*Packing method: Gift box + PP box
*Power supply: 9V battery
*Weight: 147g (without battery)
*Dimension: 67*30*183mm

                                      
Film Coating Thickness Gauge AMF022                         
*Measuring range: 0~1500µm
*Accuracy: ±3%H±1µm
*Resolution: 0.1µm (<100µm) or 1µm(>100µm)
*Use Hi-sensibility sensor for precise measurement
*Zero point, two point and basic, three different calibration
*Measuring mode: Single, Continually and Difference
*Data store/ Data recall/ Data delete function
*Data Analysis: Average, Maximum, Minimum, Standard deviation and measuring times
*Beep sound indication
*Measure in Metric/Imperial
*LCD backlight display
*Low battery indication
*Auto power off
*Packing method: Gift box + PP box
*Power supply: 3*1.5V AAA battery
*Weight: 250g (without battery)
*Dimension: 70*145*28mm
*Accuracy: ±3%H±1µm

                                      
Film Coating Thickness Gauge AMF022F                         
*Measuring range: 0~1800µm
*Accuracy: ±3%H±1µm
*Resolution: 0.1µm (<100µm) or 1µm(>100µm)
*Use Hi-sensibility sensor for precise measurement
*Zero point, two point and basic, three different calibration
*Measuring mode: Single, Continually and Difference
*Data store/ Data recall/ Data delete function
*Data Analysis: Average, Maximum, Minimum, Standard deviation and measuring times
*Beep sound indication
*Measure in Metric/Imperial
*LCD backlight display
*Low battery indication
*Auto power off
*Warranty: 12months
*Packing method: Gift box + PP box
*Power supply: 9V battery
*Weight: 220g (without battery)
*Dimension: 70*145*28mm

                                      
Coating Thickness Meter MCT200                         
Order Number: MCT200 (with F1, N1 probe); MCT200F (with F1 probe), MCT200N (with N1 Probe)

 

Features:

1. With different external probes, the gauge can be applied to measuring thickness of non-magnetic coating on magnetic metal substrate, as well as non-conductive coating on non magnetic metal substrate.
2. Five types of probes (F400, F1, F10, N1, CN02) are available for different application. F10 probe measures up to 10mm.
3. Two measuring modes: single or continuous, changeable.
4. Two calibration methods can be applied to the gauge; And the system error of the probe can be corrected with the basic probe calibration method.
5. Measured values and user information are shown on a large, easy-to-read LCD. A display back light ensures easy reading of screen data in poorly-lit conditions.
6. Measuring status indicator showing the measuring status.
7. The gauges’ user-friendly measuring system permits automatic storage of up to 1000 readings in one memory matrix for later statistical evaluation.
8. Battery information indicates the rest capacity of the battery.
9. Auto sleep and auto power off function to conserve battery life.
10. USB1.1 communication port. Optional software to process the memory data on the PC.
11. Compact aluminum case, suitable for use under poor working conditions

 
Specifications:
1. Measuring principle: Magnetic induction & Eddy current
2. Measuring range: 0~1250μm, depends on probes. maximum 10mm for the probe F10.
3. Low range resolution: 0.1μm
4. Accuracy: ±(3%Thickness+1)μm, depends on probes and conditions
5. Display: 4 digits LCD with EL backlight
6. Memory for up to 20 files (up to 50 values for each file) of stored values.
7. Unit system: Metric (μm), Imperial (mil)
8. Power source: Two “AA” size, 1.5 Volt alkaline batteries. 200 hours typical operating time (EL backlight off).
9. Communication: USB1.1
10. Dimensions: 125 x 67 x 31 mm
11. Weight:340g
                                        
Coating Thickness Meter TIME2600                                     
Order Number:
TIME2600: with F1, N1 probe
TIME2600F: with F1 probe
TIME2600N: with N1 probe
TIME2600F4: with F400 probe
TIME2600F19: with F1/90 probe
TIME2600CN: with CN02 probe

Product Introduction:
TIME2600 Coating Thickness Gauge can nondestructively measure the thickness of non-magnetic coatings (such as zinc, aluminum chrome, copper, rubber, paint and so on) on ferrous metals (such as steel, iron, alloyed metals, hard magnetic steel and so on). It can also measure the thickness of non-conducting coatings (such as rubber, paint, plastic, anode oxide film and so on) on the non-ferrous materials (such as copper, aluminum, zinc, tin and so on). It can fast, exactly and nondestructively measure the thickness of coating and plating.

Features
1. Two measuring methods: magnetic induction (F) and eddy current (N). When F probe is equipped, it can measure the non-magnetic coating in magnetism substrate, when N probe is equipped, it measure the non-conductive coating on non-magnetism substrate.
2. 6 types of probes are available for various applications:F400, F1, F1/90, F10, N1, CN02
3. 2 measurement modes: continuous / single
4. 5 statistical ways: Mean values / Max. values / Min. values / testing numbers. (No.) / standard deviations (S.DeV)
5. 640 measured values can be stored
6. Integrated with printer for convenient use
7. Low battery indication
8. 2 switch off modes: manual and auto
Technical Specification
1. Standards: DIN, ISO, ASTM, BS
2. Calibration: Zero and foil calibration
3. Data memory: 640 readings
4. Statistics: Number of measurements, mean, standard deviation, maximum and minimum of 3000 readings
5. Data memory: 640 readings
6. Limits: Adjustable with alarm
7. Interface: RS-232
8. Working temperature: 0~40℃
9. Power supply: NiMH Rechargeable batteries 1.25V
10. Dimensions: 230 x 86 x 47mm
11. Weight: Approx. 530g

Optional probes and technical specification

Probe model F400 F1 F1/90º F10 N1 CN02
Operating principle Magnetic induction Eddy current
Measuring range (µm) 0-400 0-1250 0-10000 0 to 1250μm
0 to 40μm (for chrome plate on copper)
10~200
Low range resolution (µm) 0.1 0.1 10 0.1 1
Accuracy One-point calibration (µm) ±(3%H+1) ±(3%H+10) ±(3%H+1.5) ±(3%H+1)
Two-point calibration (µm) ±[(1~3)H%+0.7] ±[(1~3)H%+1] ±[(1~3)%H+10] ±[(1~3)%H+1.5] -
Measuring conditions Min curvature of the min area (mm) Convex 1 1.5 Flatten 10 3 Flatten
Diameter of the min area (mm) φ3 φ7 φ7 φ40 φ5 φ7
Critical thickness of substrate (mm) 0.2 0.5 0.5 2 0.3 unlimited
                                        
Coating Thickness Meter CM-8855                                     
1.FEATURES
It meets the standards of both ISO2178 and ISO 2361 as well as DIN, ASTM and  BS. It can be used both in the laboratory and in harsh field conditions.
The F probes measure the thickness of non-magnetic materials (e.g. paint, plastic, porcelain enamel, copper, zinc, aluminum , chrome etc.) on magnetic
materials (e.g. iron, nickel etc.) . often used to measure the thickness of
galvanizing layer, lacquer layer, porcelain enamel layer, phosphide layer, copper tile, aluminum tile, some alloy tile, paper etc.
The N probes measure the thickness of non-magnetic coatings on non-magnetic metals . It is used on anodizing, varnish, paint, enamel, plastic coatings, powder, etc. applied to aluminum, brass, non-magnetic stainless steel, etc.
* Automatic substrate recognition.
* Manual or automatic shut down.
* Two measurement mode: Single and Continuous
* Wide measuring range and high resolution.
* Metric/Imperial conversion.
* Digital backlit display gives exact reading with no guessing or errors.
* Can communicate with PC computer for statistics and printing by the optional cable.
* Can store 99 groups of measurements.
* Statistics is available.
2.SPECIFICATIONS
Display: 4 digits LCD, backlight
Range: 0~1250μm/0~50mil (other ranges can be specified )
Min. radius work piece: F: Convex 1.5mm/Concave 25mm; N: Convex 3mm/ Concave 50mm
Min. measuring area: 6mm
Min. Sample thickness : 0.3mm
Resolution: 0.1μm (0~99.9μm); 1μm (over 100μm)
Accuracy: ±1~3%n or 2.5μm or 0.1mil (Whichever is the greater)
Battery Indicator: Low batter indicator.
PC interface: with RS-232C interface
Power supply: 2x1.5 AAA(UM-4) battery
Operating condition: Temp. 0~50℃ . 
Humidity <95% .
Size: 126x65x35 mm;  5.0x2.6x1.6 inch
Weight: about 81g(not including batteries)
Standard accessories:
Carrying case ...................1 pc.
Operation manual ............ 1 pc.
F probe in built .................1 pc.
NF probe in built...............1 pc.
Calibration foils ..............1set.
Substrate (Iron) ................1 pc.
Substrate (Aluminium)......1 pc.
Optional accessories: RS-232C cable & software:
1.USB adaptor for RS-232C
2.Bluetooth  interface
                                        
Coating Thickness Meter CM-8856                                     
1.FEATURES
It meets the standards of both ISO2178 and ISO 2361 as well as DIN, ASTM and BS. It can be used both in the laboratory and in harsh field conditions.
* The F probes measure the thickness of non-magnetic materials (e.g. paint, plastic, porcelain enamel, copper, zinc, aluminum , chrome etc.) on magnetic materials (e.g. iron, nickel etc.) . often used to measure the thickness of galvanizing layer, lacquer layer, porcelain enamel layer, phosphide layer, copper tile, aluminum tile, some alloy tile, paper etc.
The N probes measure the thickness of non-magnetic coatings on non-magnetic metals . It is used on anodizing, varnish, paint, enamel, plastic coatings, powder, etc. applied to aluminum, brass, non-magnetic stainless steel, etc.
* Automatic substrate recognition.
* Manual or automatic shut down.
* Two measurement mode: Single and Continuous
* Wide measuring range and high resolution.
* Metric/Imperial conversion.
* Digital backlit display gives exact reading with no guessing or errors.
* Can communicate with PC computer for statistics and printing by the optional cable.
* Can store 99 groups of measurements.
* Statistics is available.
2.SPECIFICATIONS
Display: 4 digits LCD, backlight
Range: 0~1250μm/0~50mil (other ranges can be specified )
Min. radius work piece: F: Convex 1.5mm/Concave 25mm; N: Convex 3mm/ Concave 50mm
Min. measuring area: 6mm
Min. Sample thickness : 0.3mm
Resolution: 0.1μm (0~99.9μm); 1μm (over 100μm)
Accuracy: ±1~3%n or 2.5μm or 0.1mil (Whichever is the greater)
Battery Indicator: Low batter indicator.
PC interface: with RS-232C interface
Power supply: 2x1.5 AAA(UM-4) battery
Operating condition: Temp. 0~50℃ . 
Humidity <95% .
Size: 126x65x35 mm;  5.0x2.6x1.6 inch
Weight: about 81g(not including batteries)
Standard accessories:
Carrying case ...................1 pc.
Operation manual ............ 1 pc.
F probe in built .................1 pc.
NF probe in built...............1 pc.
Calibration foils ..............1set.
Substrate (Iron) ................1 pc.
Substrate (Aluminium)......1 pc.
Optional accessories: RS-232C cable & software:
1.USB adaptor for RS-232C
2.Bluetooth  interface
                                          
Coating Thickness Meter CM-8829F, CM-8829N, CM-8829FN    
Operating principle: magnetic induction / eddy current
Measuring range: 0-1250um/0-50mil
Resolution: 0.1/1
Accuracy: ±1-3%n or ±2.5um
Min. measuring area: 6mm
Min. sample thickness: 0.3mm
Battery indicator: low battery indicator
Metric/ imperial: convertible
Power supply: 4 x 1.5V AAA (UM-4) battery
Auto power off
Operating conditions:0 ~ +45℃ (32℉-104℉), 90%RH max
Dimensions: 126x65x27mm
weight: 81g (not including battery)
Optional accessories: other range 0-200um to 15000um

                                        
Coating Thickness Meter CM-8829SF, CM-8829SN, CM-8829SFN    
Application: used for measuring thickness and corrosion of pressure vessels, chemical equipment, boilers, oil storage tanks etc. in industries of petroleum, shipbuilding, power station and machine manufacturing.
With separate probe (s)
Operating principle: magnetic induction/eddy current (F/NF)
Measuring range:0-1250um/0-50mil
Resolution: 0.1/1
Accuracy: ±1-3%n or ±2.5um
Min. measuring area:6mm
Min. sample thickness:0.3mm
Battery indicator: low battery indicator
Metric/ imperial: convertible
Power supply: 4x1.5V AAA(UM-4)battery
Auto power off
Operating conditions:0-+45℃(32℉-104℉),≤90%RH
Dimensions: 126x65x27mm
weight: 81g(not including battery)
Optional accessories: other range 0-200um to 15000um
Optional accessories: RS-232C cable & software:
1.USB adaptor for RS-232C
2.Bluetooth  interface
                                        
Coating Thickness Meter CM-8828F, CM-8828N, CM-8828FN    
Operating principle: magnetic induction / eddy current
Measuring range: 0-1250um/0-50mil
Resolution: 0.1/1
Accuracy: ±1-3%n or ±2.5um
Min. measuring area: 6mm
Min. sample thickness: 0.3mm
Battery indicator: low battery indicator
Metric/ imperial: convertible
Power supply: 4 x 1.5V AAA (UM-4) battery
Auto power off
Operating conditions:0 ~ +45℃ (32℉-104℉), 90%RH max
Dimensions: 126x65x27mm
weight: 81g (not including battery)
Optional accessories: other range 0-200um to 15000um

                                        
Coating Thickness Meter CM-8826F, CM-8826N, CM-8826FN    
Operating principle: magnetic induction / eddy current
Measuring range: 0-1250um/0-50mil
Resolution: 0.1/1
Accuracy: ±1-3%n or ±2.5um
Min. measuring area: 6mm
Min. sample thickness: 0.3mm
Battery indicator: low battery indicator
Metric/ imperial: convertible
Power supply: 4 x 1.5V AAA (UM-4) battery
Auto power off
Operating conditions:0 ~ +45℃ (32℉-104℉), 90%RH max
Dimensions: 126x65x27mm
weight: 81g (not including battery)
Optional accessories: other range 0-200um to 15000um

                                        
Coating Thickness Meter CM-8825F, CM-8825N, CM-8825FN    
Operating principle: magnetic induction/eddy current (F/NF)
Measuring range: 0-1250um/0-50mil
Resolution: 0.1/1
Accuracy: ±1-3%n or ±2.5um
Min. measuring area: 6mm
Min. sample thickness: 0.3mm
Battery indicator: low battery indicator
Metric/imperial: convertible
Power supply: 4x1.5V AAA(UM-4) battery
Auto power off
Operating conditions:0-+45℃ (32℉-104℉), 90%RH max
Dimensions: 126 x 65 x 27mm
weight: 81g (not including battery)
Optional accessories: other range 0-200um to 15000um

                                        
Coating Thickness Meter CM-8823    
Operating principle: eddy current (NF)
Measuring range: 0-1000um
Resolution: 0.1/1
Accuracy: ±1-3%n or ±2.5um
Min. measuring area: 6mm
Min. sample thickness: 0.3mm
Battery indicator: low battery indicator
Metric/ imperial: convertible
Power supply: 4x1.5V AA (UM-3)battery
Auto power off
Operating conditions:0-+45℃(32℉-104℉),≤90%RH
Dimensions: 160x68x32mm
weight: 250g(not including battery)
Optional accessories: other range 0-200um to 5000um

                                        
Coating Thickness Meter CM-8822    
Operating principle: magnetic induction/eddy current (F/NF)
Measuring range: 0-1000um
Resolution: 0.1/1
Accuracy: ±1-3%n or ±2.5um
Min. measuring area: 6mm
Min. sample thickness: 0.3mm
Battery indicator: low battery indicator
Metric/ imperial: convertible
Power supply: 4x1.5V AA(UM-3)battery
Auto power off
Operating conditions:0-+45℃(32℉-104℉),≤90%RH
Dimensions: 160x68x32mm
weight: 250g(not including battery)
Optional accessories: other range 0-200um to 15000um

                                        
Coating Thickness Meter CM-8821    
Operating principle: magnetic induction (F)
Measuring range:0-1000um
Resolution: 0.1/1
Accuracy: ±1-3%n or ±2.5um
Min. measuring area: 6mm
Min. sample thickness: 0.3mm
Battery indicator: low battery indicator
Metric/ imperial: convertible
Power supply: 4x1.5V AA (UM-3) battery
Auto power off
Operating conditions:0-+45℃(32℉-104℉),≤90%RH
Dimensions: 160x68x32mm
weight: 250g(not including battery)
Optional accessories: other range 0-200um to 15000

                                        
Coating Thickness Meter CM-8820    
Operating principle: magnetic induction (F)
Measuring range: 0-2000um
Resolution: 0.1/1
Accuracy: ±5%n or ±5um
Min. measuring area: 6mm
Min. sample thickness: 0.3mm
Metric/ imperial: convertible
Battery indicator: low battery indicator
Power supply: 4x1.5V AA (UM-3)battery
Auto power off
Operating conditions:0-+45℃(32℉-104℉),≤90%RH
Dimensions: 160x68x32mm
weight: 210g(not including battery)
Optional accessories: other range 0-200um to 15000um

                                        
Wet Film Combo CM-8000    
Applications:
Used for checking the thickness coating of wet paint, enamel lacquer, adhensive, architectural coating, color coating, varnish, chemical industry, or other coating that has been applied to a smooth surface.
Specifications:
1. Measuring Range: 25-3000um
2. Step Graduation: 25~400um: 25um; 450-900um: 50um; 1000-1200um: 100um; 1400~3000um: 200um, thickness 1.0mm
3. Measuring Procedure:
  1). Select appropriate comb according to approximate known thickness.
  2). Hold comb perpendicular to surface coating to be measured.
  3). Press into coating until the comb stands square on substrate.
  4). Wet film thickness is between the highest step which is coated and the next (higher) step which remains uncoated.

                                      
Ultrasonic Thickness Gauge TM-8818    
Applications
Used for measuring thickness and corrosion of pressure vessels, chemical equipment, boilers, oil storage tanks etc. in industries of petroleum, shipbuilding, power station, and machine manufacturing.

Features:
* Using the latest high performance and low power consumption microprocessor technology.
* Bidirectional measurement, for materials within measurement range, thickness is measurable with know velocity, Conversely velocity is measurable with know thickness.
* Automatic memory material code and sound velocity value, convenient to use.
* Coupling symbol indication.
* Automatic power off to conserve power.
* Use USB data output and RS-232 data output to connect with PC.

Specifications:
1. Case Material: Aluminum Alloy
2. Display: 4 Digit LCD
3. Operating Principle: Ultrasonic
4. Measuring Range (metric / Imperial): 0.75~400mm (45# steel, Depend on Probe)
5. Battery Indication: Low Battery Indication
6. Sound Velocity: 500~9,990m/s
7. Lower Limit Steel Pipes: Φ20 x 3.0mm
8. Calibration Block: Included
9. Resolution: 0.01mm / 0.1mm
10. Accuracy: ±0.5%n
11. Automatic memory material code and the value of sound velocity
12. Power off: Auto Power off & Manual Power Off
13. Operating Conditions: Temperature: 0~40 °C, Humidity: < 85 %RH
14. Power Supply: 2 x 1.5V AA Battery
15. Dimensions: 130 x 76 x 31mm
16. Weight: 340g (Not Including Batteries)

                                     
Ultrasonic Thickness Gauge TM-8816    
Application: Used for measuring thickness and corrosion of pressure vessels, chemical equipment, boilers, oil storage tanks etc. in industries of petroleum, shipbuilding, power station, and machine manufacturing.
Measuring range (metric/imperial): 1.0-200mm,0.05-8inch
Operating principle: ULTRASONIC
Materials measured: any hard materials, including steel, cast iron, aluminum, red copper, brass, zinc, quartz glass, polyethylene, PVC, gray cast iron, nodular cast iron and other materials
Sound velocity: 500-9000m/s
Lower limit steel pipes: ф15x2.0mm, ф20x3.0mm determined by the transducer
Calibration block: included
Resolution: 0.1mm (TM8816C 0.01mm)
Accuracy: ±(0.5%n+0.1)
RS232C interface: with RS232C
Power supply: 4x1.5V AAA (UM-4)battery
Battery indicator: low battery indicator
Operating conditions:0-+45℃(32℉-104℉),≤90%RH
Dimensions: 120x62x30mm
weight: 164g(not including battery

                                       
Ultrasonic Thickness Gauge TM-8812    
Measuring range: 1.2-225mm, 0.05-9inch
Operating principle: ULTRASONIC
Materials measured: any hard materials, including steel, cast iron, aluminum, red copper, brass, zinc, quartz glass, polyethylene, PVC, gray cast iron, nodular cast iron and other materials
Sound velocity: 500-9000m/s
Lower limit steel pipes: ф15x2.0mm, ф20x3.0mm determined by the transducer
Calibration block: included
Resolution: 0.1mm
Accuracy: ±(0.5%n+0.1)
RS232C interface: with RS232C
Power supply: 4 x 1.5V AAA (UM-4)battery
Battery indicator: low battery indicator
Operating conditions:0-+45℃ (32℉-104℉), 90%RH max
Dimensions: 120 x 62 x 30mm
Weight: 164g (not including battery)

                                       
Ultrasonic Thickness Gauge TM-8811    
Measuring range: 1.2-200mm,0.06-8inch
Operating principle: ULTRASONIC
Materials measured: any hard materials, including steel, cast iron, aluminum, red copper, brass, zinc, quartz glass, polyethylene, PVC, gray cast iron, nodular cast iron and other materials
Sound velocity: 500-9000m/s
Lower limit steel pipes: ф15x2.0mm, ф20x3.0mm determined by the transducer
Calibration block: included
Resolution: 0.1mm
Accuracy: ±(0.5%n+0.1)
Power supply: 4x1.5V AA(UM-3)battery
Battery indicator: low battery indicator
Operating conditions: 0-+45℃(32℉-104℉),≤90%RH
Dimensions: 160x68x32mm
Weight: 208g (not including battery)
Optional Accessories: 6MФ6mm thin Material probe: Measuring range (steel): 1.0 50.0mm; Operating temperature: -10~+60℃; 5MФ12high temperature probe: Measuring range (steel): 1.0~225.0mm(normal temperature) Measuring range (steel): 4.0~100.0mm (high temperature) Operating temperature: -10~+300℃

                                       
Ultrasonic Thickness Gauge TM-8810    
Measuring range: 1.2-200mm,0.06-8inch
Operating principle: ULTRASONIC
Materials measured: only 11 types of materials, including steel, cast iron, aluminum, red copper, brass, zinc, quartz glass, polyethylene, PVC, gray cast iron, nodular cast iron
Lower limit steel pipes: ф15x2.0mm, ф20x3.0mm determined by the transducer
Calibration block: included
Resolution: 0.1mm
Accuracy: ±(0.5%n+0.1)
Power supply: 4x1.5vaa(UM-3) battery
Battery indicator: low battery indicator
Operating conditions:0-+45℃(32℉-104℉),≤90%RH
Dimensions: 160x68x32mm
Weight: 208g(not including battery)
Optional Accessories: 6MФ6mm thin Material probe:Measuring range (steel): 1.0 50.0mm; Operating temperature: -10~+60℃; 5MФ12high temperature probe: Measuring range (steel): 1.0~225.0mm(normal temperature) Measuring range (steel): 4.0~100.0mm (high temperature) Operating temperature: -10~+300℃

                                       
Ultrasonic Thickness Gauge AMA006    
Features:
1. Ultrasonic measures thickness
2. Various material (metal/glass/plastics/pottery and other materials)
3. Ultrasonic velocity adjustable
4. Measuring velocity function
5. Thickness unit mm/inch convertible
6. Coupling indication
7. Build in a metal piece for calibration
8. Low battery voltage indication.
9. Auto power off

Specifications:
1. According to European union’s CE safety norms
2. Ultrasonic frequency: 5MHz
3. Digital display: 4 digitals
4. Measuring range: 1.2mm~225mm(steel)
5. Pipe measures: minimum dia. 20*3mm(steel)
6. Velocity range: 1000~9999 m/s
7. Resolution: 0.1 mm.
8. Accuracy: ±(1%H+0.1mm)
9. Response time: 0.5 S
10. Operating temperature: 0~40°C
11. Operating humidity: 10 to 90%RH
                                       
Ultrasonic Thickness Gauge AMF018    
*Measuring range: 1.2~220mm (Steel)
*Accuracy: ±(1%H+0.1)mm
*Resolution: 0.1mm
*Sound velocity range: 1000~9999m/s
*Working frequency: 5MHz
*Minimum limit for tube measuring: Φ20*3mm (Steel)
*Auto calibration to assure the accuracy
*Auto linear compensation: this advanced software program enhances the precision by correcting the non-linear accuracy of transducer.
*Data store/ Data recall/ Data delete function
*Sound velocity measurement
*Low battery indication
*Auto power off
*LCD backlight display
*Packing Method: Gift box + PP box
*Power supply: 3pcs*1.5V AAA alkaline batteries
*Weight: 210g
*Dimension: 70*145*28mm

                                       
Ultrasonic Thickness Gauge MT200    
It is designed to improve safety and ensure reliability of material subject to corrosion or erosion.
Corrosion gauges with their dual-element transducers are the primary inspection tool used to measure the remaining walls of components such as pipelines, pressure vessels, storage tanks, and numerous other applications..
Precision gauges use single-element transducers to provide the thinnest range and highest degree of accuracy possible. Common applications include metals and a variety of non-metals (i.e. glass, ceramic, plastic, etc.).
Accuracy and repeatability of displayed value
Measuring Range 0.75mm-300mm(in steel)

Sound Velocity 1000~9999 m/s
Resolution 0.1/0.01mm (selectable)
Units mm/inch (selectable)
Storage 20 groups (100 files/group)
Accuracy ± ( 0.5%Thickness+0.04 ) mm
Alarm
preset upper and lower limit
Work voltage
3V (2 AA alkaline battaries)
Interface port
RS232
Dimensions
132*76*33mm
Weight
345g
Display
LCD with backlight
Continuous working period
100 hours (with backlight off)
                                       
Ultrasonic Thickness Gauge MT160 & MT150   

It is designed to improve safety and ensure reliability of material subject to corrosion or erosion.
Corrosion gauges with their dual-element transducers are the primary inspection tool used to measure the remaining walls of components such as pipelines, pressure vessels, storage tanks, and numerous other applications..
Precision gauges use single-element transducers to provide the thinnest range and highest degree of accuracy possible. Common applications include metals and a variety of non-metals (i.e. glass, ceramic, plastic, etc.).

Accuracy and repeatability of displayed value
  MT160 MT150
Measuring Range 0.75mm-300mm(in steel) 
Sound Velocity 1000~9999 m/s
Resolution 0.1/0.01mm (selectable) 0.1mm
Units mm/inch (selectable)
Storage 20 groups (100 files/group)
Accuracy ± ( 0.5%Thickness+0.04 ) mm
Alarm
preset upper and lower limit
Work voltage
3V (2 AA alkaline batteries)
Interface port
RS232, single port and scan RS232
Dimensions
132*76*33mm 150*74*33mm
Weight
345g 245g
Display
LCD with backlight
Continuous working period
100 hours (with backlight off)
                                       
Multi Function Ultrasonic Thickness Gauge MT180 & MT190   
Features:
The meter is a multi-mode ultrasonic thickness gauge. Based on the same operating principles as SONAR, the instrument is capable of measuring the thickness of various materials with accuracy as high as 0.1/0.01 millimeters.
The multi-mode feature of the gauge allows the user to toggle between pulse-echo mode (flaw and pit detection), and echo-echo mode (eliminate paint or coating thickness).

Specifications:
1) Display: 4.5 digits LCD with EL backlight.
2) Range: Pulse-Echo mode: 0.65~600mm in Steel. Echo-Echo mode: 3~30mm for MT180, 3~60mm for MT190.
3) Sound Velocity Range: 1000~9999m/s.
4) Resolution: 0.1mm/0.01mm
5) Accuracy: ±0.5% Thickness depends on materials and conditions
6) Memory for up to 20 files (up to 99 values for each file) of stored values.
7) Power Source: Two "AA" size, 1.5 Volt alkaline batteries. 100 hours typical operating time (EL backlight off).
8) Communication: USB
9) Outline dimensions: 150 x 74 x 32mm.
10) Weight: 245g

                                       
 Ultrasonic Thickness Gauge UM-1 and UM-1D                    
Model

UM-1

UM-1D

Measuring Range 0.8 ~ 300mm (P-E) 0.8 ~ 300mm (P-E)
3 ~ 18mm (E-E)
Testing Method Pulse - Echo (P-E) Pulse - Echo (P-E)
Echo - Echo (E-E)
Resolution

0.001" or 0.1mm

Units

inch and mm

Sound Velocity

1000~9999 m/s

Storage

500 readings

Interface port

RS232

 

Specification Sheet

Specification Sheet

                                       
 Concrete Floor Thickness Tester H51                    
Application:
The instrument is used for nonmetallic board thickness testing such as concrete, rock, glass etc. The functions include thickness testing, data analysis, saving and transmission. It is a potable, efficient, precise and intelligent instrument.

Features:
1) Long test distance: Test distance can up to 800mm.
2) High precision and stability: Interpreting the board thickness Intelligently can avoid man-made errors and reduce labor intensity.
3) Fast and efficient: Test 3~5 point thickness within 3 minutes.
4) Long service life of sensor: Improve the service life by paste abrasion resistance allowance on the bottom of sensor.
5) The special clasp between extend bar and transmitting sensor can prevent its falling.
6) Can save test date: This function is convenient for laborer data management.
7) Powerful data process and analysis software in Windows.
Technical Data/Measurement
1. Test scope: 40mm~800mm
2. Permissible error: 40 ~ 600mm ±1mm; 601~ 800mm ±2mm
3. Data storage capacity: 3.2 group data
4. Operational environment: temperature:-10°C~+40°C Dampness: <90%RH
5. EMI: no strong electromagnetic field
6. Batteries:6 x AA cells, work more than 30 times
                                       
 Impact Echo Concrete Thickness Tester H61                    
Application:
H61 impact echo thickness tester is based on the principle of the impact echo, measuring the thickness of one-side concrete. Mainly used for the thickness of the floor, wall thickness, thickness of tunnel concrete, thickness of pavement concrete, airport runway and other concrete thickness measurement.

Features:
1. Simple to use. Using the shock wave nondestructive testing, without drilling, coring or other way.
2. Large color LCD screen: 5" color LCD screen display, resolution of 640 x 480, clear and friendly interface.
3. Can display the waveform of impact echo: can directly display the waveform at site, making it easy for the user to observe the impact effect and to ensure the accuracy of the test results.
4. Large storage capacity. Be able to record more than 20000 test point data, convenient for the user.
5. The built-in lithium battery. Instrument use the built-in lithium battery, which is rechargeable.
6. The real USB data transmission. Can rapidly transfer the test data into the computer for further analysis.
7. Can save the test date. Save the test date, convenient for data management.
8. Can be customized in Chinese and English. Can meet the demand of domestic users, but also can satisfy users in overseas markets.
9. Powerful professional windows data analysis processing software: data can be imported into Word and Excel, convenient for post-processing of data.
Technical Data/Measurement
1. Measuring range: 5 cm to 110 cm;
2. Test accuracy: <1%;
3. Data storage capacity: can record up to 20000 test data;
4. Display mode: color LCD screen, 640 x 480 resolution;
5. The built-in lithium battery, can use up to 8 hours;
6. Working temperature: - 10 ~ + 50°C;
7. Instrument size: 208 x168 x168 mm;
8. Weight: 960g.
                                      
Portable Ultrasonic Flaw Detector MFD500B    
Display: Hi-resolution (320×240 pixels) multi-color TFT LCD with 4 user-selectable brightness control provides high contrast viewing of the waveform from bright, direct sunlight to complete darkness. The hi-resolution multi-color TFT LCD display with fast 60 Hz update gives an "analog look" to the waveform providing detailed information that is critical in many applications including nuclear power plant inspections.
Range: Up to 9999 mm in steel. suitable for use on large work pieces and in high-resolution measurements.
Pulse: Pulse Energy selectable among Low, Medium and High.
Pulse Width tunable from 0.1µs to 0.5 µs to match the probes with different frequency. Pulse Repetition Frequency adjustable from 10 Hz to 1 KHz in 1 Hz increments. Damping selectable among 100Ω、200Ω and 400Ω for optimum probe
Performance: Test Modes include Pulse echo, dual and thru-transmission
Receiver: Sampling:10 digit AD Converter at the sampling speed of 160 MHz; Rectification: Positive Half wave, Negative Half wave, Full wave and RF.  Analog Bandwidth: 0.5MHz to 15MHz capability with selectable frequency ranges (automatically set by the Gain: 0 dB to 110 dB adjustable in selectable steps 0.1 dB, 2 dB, 6 dB, and locked. instrument) to match probe for optimum performance.

Gates: Gate Start: Variable over entire displayed range
Gate Width: Variable from Gate Start to end of displayed range
Gate Height: Variable from 0 to 99% Full Screen Height
Alarms: Threshold positive/negative
Memory: Memory of 100 channel files to store calibration set-up
Memory of 1000 wave files to store A-Scan patterns and instrument settings.
All the files can be stored, recalled and cleared.
Functions: Semiautomatic two point calibration: Automated calibration of transducer zero offset and/or material velocity
Flaw Locating: Live display Sound-path, Projection (surface distance), Depth, Amplitude
Flaw sizing: Automatic flaw sizing using AVG/AVG or DAC, speeds reporting of defect acceptance or rejection.
Digital Readout and Trig. Function: Thickness/Depth can be displayed in digital readout when using a normal probe and Peam path, Surface Distance and Depth are directly displayed when angle probe is in use.
Both the DAC and the AVG method of amplitude evaluation are available.
Curved Surface Correction feature
Crack Height Measure function
Weld figure feature
Magnify gate: spreading of the gate range over the entire screen width Video Recording and play Auto-gain function
Envelope: Simultaneous display of live A-scan at 60 Hz update rate and envelope of A-scan display
Peak Hold: Compare frozen peak waveforms to live A-Scans to easily interpret test results.
A Scan Freeze: Display freeze holds waveform and sound path data B Scan display feature
Real Time Clock
The instrument clock keeps running tracking the time.
Communication
High speed USB2.0 port.
The optional DataPro software helps manage and format stored inspection data for high-speed transfer to the PC. Data can be printed or easily copied and pasted into word processing files and spreadsheets for further reporting needs. New features include live screen capture mode and database tracking.
Battery: Internal rechargeable Li-ion battery pack rated 7.2V at 8800 mAh; 8 hours nominal operating time depending on display brightness 8-10 hours typical recharge time Knob
Operating adjustments are easily and quickly made using the rotary knob.
Specifications: Range: 0 to 9999 mm, at steel velocity
Material Velocity: 1000 to 9999m/s
Display Delay: -20 to 3400 µs
Probe Delay/Zero Offset : 0 to 99.99µs
Sensitivity: 110 dB max in selectable resolution 0.1, 1.0, 2.0, 6.0 dB and locked.
Test Modes: Pulse echo, dual element and thru-transmission
Pulser: Tunable Square Wave Pulser
Pulse Repetition Frequency ranges from 10 Hz to 1000 Hz
Pulse Energy: Low, Medium and High
Damping: 100, 200, 400 ohms
Bandwidth (amplifier bandpass ): 0.5 to 15 MHz
Gate Monitors: Two independent gates controllable over entire sweep range
Rectification: Positive halfwave, negative halfwave, fullwave, RF
System Linearity: Horizontal: +/-0.2% FSW, Vertical: 0.25% FSH, Amplifier
Accuracy +/-1 dB.
Reject (suppression): 0 to 80% full screen height
Units: Inch or millimeter
Transducer Connections: BNC or LEMO
Power Requirements: AC Mains 100-240 VAC, 50-60 Hz
Dimensions: 263H×170W×61D mm
Operating Temperature: -10℃ to 50℃
Storage Temperature: -30℃ to 50℃
                                          
Portable Ultrasonic Flaw Detector MFD350B    
SPECIFICATIONS
Range: (0 ~ 6000) mm
Bandwidth: (0.5 ~ 10) MHz
Material Velocity: (1000 ~ 9999) m/s
Dynamic Range: ≥ 32dB
Vertical linear error: ≤ 3%
Horizontal linear error: ≤ 0.2%
Resolution:> 40dB (5P14)
Sensitivity Leavings: 60dB (flat-bottomed deep hole 200mmФ2)
Rejection: (0 to 80)% Linear
Noise level: ≤ 10%
Power supply: DC 9V; lithium batteries work for 4 to 8 hours or more
Ambient temperature: (-20 ~ 50) ℃
Relative Humidity: (20 ~ 95)% RH
Overall dimensions: 263 × 170 × 61 (mm)

                                          
Portable Ultrasonic Flaw Detector MFD620C    
Specifications
1) Range:0 to 6000 mm, at steel velocity
2) Material Velocity: 1000 to 15000m/s
3) Display Delay: -20 to 3400 µs
4) Probe Delay/Zero Offset : 0 to 99.99µs
5) Sensitivity: 110 dB max in selectable resolution 0.1, 1.0, 2.0, 6.0 dB and locked.
6) Test Modes: Pulse echo, dual element and thru-transmission
7) Pulser: Tunable Square Wave Pulser
8) Pulse Repetition Frequency ranges from 10 Hz to 1000 Hz
9) Pulse Energy: 200V, 300V, 400V, 500V, 600V selectable
10) Bandwidth (amplifier bandpass ): 0.5 to 15 MHz
11) Gate Monitors: Two independent gates controllable over entire sweep range
12) Rectification: Positive half wave, negative half wave, full wave, RF
13) System Linearity: Horizontal: +/-0.2% FSW, Vertical: 0.25% FSH, Amplifier Accuracy +/-1 dB.
14) Reject (suppression): 0 to 80% full screen height
15) Units: Inch or millimeter
16) Transducer Connections: BNC or LEMO
17) Power Requirements: AC Mains 100-240 VAC, 50-60 Hz
18) Operating Temperature: -10°C to 50°C
19) Storage Temperature: -30°C to 50°C
                                          
Portable Ultrasonic Flaw Detector MFD650C    
*Range: 0 to 9999 mm, at steel velocity
*Material Velocity: 1000 to 9999m/s
*Display Delay: -20 to 3400 µs
*Probe Delay/Zero Offset : 0 to 99.99µs
*Sensitivity: 110 dB max in selectable resolution 0.1dB, 1.0dB, 2.0dB, 6.0 dB and locked.
*Test Modes: Pulse echo, dual element and thru-transmission
*Pulser: Tunable Square Wave Pulser
*Pulse Repetition Frequency ranges from 10 Hz to 1000 Hz
*Pulse Energy: 200V, 300V, 400V, 500V, 600V selectable
*Bandwidth (amplifier band pass ): 0.5 to 15 MHz
*Gate Monitors: Two independent gates controllable over entire sweep range
*Rectification: Positive half wave, negative half wave, full wave, RF
*System Linearity: Horizontal: +/-0.2% FSW, Vertical: 0.25% FSH, Amplifier Accuracy +/-1 dB.
*Reject (suppression): 0 to 80% full screen height
*Units: Inch or millimeter
*Transducer Connections: BNC or LEMO
*Power Requirements: AC Mains 100-240 VAC, 50-60 Hz
*Dimensions: 280H×220W×70 mm
*Operating Temperature: -10℃ to 50℃
*Storage Temperature: -30℃ to 50℃
                                          
Portable Ultrasonic Flaw Detector MFD800C    
*Range: 0 to 9999 mm, at steel velocity
*Material Velocity: 1000 to 9999m/s
*Display Delay: -20 to 3400 µs
*Probe Delay/Zero Offset : 0 to 99.99µs
*Sensitivity: 110 dB max in selectable resolution 0.1, 1.0, 2.0, 6.0 dB and locked.
*Test Modes: Pulse echo, dual element and thru-transmission
*Pulser: Tunable Square Wave Pulser
*Pulse Repetition Frequency ranges from 10 Hz to 1000 Hz
*Pulse Energy: 200V, 300V, 400V, 500V, 600V selectable
*Bandwidth (amplifier bandpass ): 0.5 to 15 MHz
*Gate Monitors: Two independent gates controllable over entire sweep range
*Rectification: Positive half wave, negative half wave, full wave, RF
*System Linearity: Horizontal: +/-0.2% FSW, Vertical: 0.25% FSH, Amplifier Accuracy +/-1 dB.
*Reject (suppression): 0 to 80% full screen height
*Units: Inch or millimeter
*Transducer Connections: BNC or LEMO
*Power Requirements: AC Mains 100-240 VAC, 50-60 Hz
*Operating Temperature: -10℃ to 50℃
*Storage Temperature: -30℃ to 50℃
                                         
X-Ray Flaw Detector General Purpose    
Application:
Our Portable X-ray Non-destructive Testing Equipments are the ideal inspection instruments used in the field of oil pipeline, chemical, aviation, astronavigation, mechanism, boiler, pressure container, shipbuilding, and national defense industries.
Features:
1. An overall self-diagnosis for software and hardware after startup can effectively detect the failure component.
2. Strong anti-interference properties make our X-ray Equipment can also work with electric generator in the wild field.
3. Quickly and exactly set exposure parameters by manual button.
4. High voltage can be started delayed to make enough time for personnel evacuate.
5. Slowly increase and decrease high voltage to protect X-ray generator
6. The ratio of working and rest is 1:1

Order Number Serials:
XXQ: Directional X-Ray Flaw Detector + Glass Tube
XXG: Directional X-Ray Flaw Detector + Ceramic Tube
XXH: Weeks to X-Ray Flaw Detector + Flat Target
XXHA: Weeks to X-Ray Flaw Detector + Cone Target
Model
XXQ-1005
XXH-1005
XXQ-1605
XXH-1605
XXG-1605
XXQ-2005
XXG-2005
XXH-2005
XXHA-2005
XXQ-2505
XXG-205
XXH-2505
XXHA-2505
XXQ-3005
XXG-3005
XXH-3005
XXHA-3005
XXQ-3505
XXG-3505
XXH-3505
XXHA-3505
Power supply
AC220V+-10%    50Hz
Power (kW)
>1.0
>1.5
>2.5
>2.5
>3.0
>3.5
Tube voltage (kVp)
 
60-160
80-200
130-250
150-300
200-350
Max. Tube current (mA)
5
5
5
5
5
5
Focal Spot Size mm x mm
Q.G
1.0*1.0
1.5*1.5
1.5*1.5
2.0*2.0
2.5*2.5
2.5*2.5
H
1.0*1.5
1.0*2.0
1.0*2.0
1.0*2.4
1.0*2.5
1.0*2.5
HA
1.0*2.5
1.0*3.5
1.0*3.5
1.0*5.0
1.0*6.0
1.0*6.0
Weight kg
Tube
Q
11
15
20
35
44
44
G
 
14
20
32
37
37
H.HA
11
15
20
35
44
44
Controller
11
Radiation angle of X-ray
Q
40º
G
360º x 25º
H.HA
360º x 30º
Max. penetration A3 steel (mm)
Q. G
8
20
29
39
49
59
H
6
18
26
36
46
56
HA
 
15
24
34
40
50
Insulation
SF6  gas
Environmental temperature
-25℃ ~ +40℃
Relative Humidity 
No more than 85%
Working conditions of X-Ray photography
1. Focus to Film: 600mm
2. Exposure time: 5 min
3. Film: Tianjin Model III, intensified by double lead foil.
4. Treatment in the darkroom: Temp. 20 +/-2ºC, 5 min. blackness ≥ 1.5
Safe working pressure of gas
0.35 ~ 0.50Mpa (Operation will be prohibited in the case less than 0.35Mpa)
                                      
X-Ray Pipeline Crawler    
X-ray Pipeline Crawler it is used for welding line inspection. Compared with other testing machine, x-ray machine is more strictly and the result can be kept easily for long terms. It is special designed for pipeline joint inspection project, to assure the quality in pipeline construction. Compared with portable x-ray machine, it is much more automatic and high efficient.
Features:
Crawler:
1- Electronic speed control technology is adopted to achieve the slow starting and low speed positioning. It can guarantee the x-ray point to face the joint more accurately.
2- Perform very good and won’t be affected by the electric welding machine.
3- It uses multiple real-time function to protect the X-ray generator from water, over-voltage, over current, and overheat.
4- It also has the ability to inspect the energy of battery automatically. The crawler will turn back if the battery is under low power. If no signal, it also returns automatically after 30 minutes.
Generator:
1. X-ray system has constant voltage control function to ensure the density of the x ray is consistent ,not impacted by the battery. It also has the ability to save energy and protect the motor from over-current.
2. Safe and reliable generator adopts SF6 gaseous insulator, grounded-anode, and air fan cooling.
3. High purity and high density aluminium radiator is specially designed for our instrument. High temperature installation technology is adopted to improve 30% more heat radiation.
4. The HV coils made by imported enamel wire are applied in the x-ray generator, so as to make the quality of the complete equipment improved a great deal.
Battery
Panoramic lead-acid battery is selected for our crawler. Compared with the lithium battery, our battery can store energy 30% more. Lead-acid battery can also resist higher temperature, so it can avoid explosion under the overheating condition
Technical Specifications
Model XR-S1 XR-4C XR-3C XR-10C
Locating System Magnetic Medium Control (180x120x145mm,1.98kg)
Available Outside Diameter 6-12"/159-323mm 8.6~14"/219~355mm 12.7~25"/323~630mm 20~47"/60";508~1400mm (with spindle)
Crawler Dimensions  2930*Φ125mm  1490x170x150mm  1300x190x200mm  1350x240x350mm
Position Precision ±3mm
Moving Distance  6km 5km (Round trip)
Crawler Weight  40kg 37kg  57kg  93kg
Lead Acid Battery  9Ah (LI)  7Ah  12Ah  17Ah
Battery Weight  19kg  28kg  44kg  64kg
Max Climbing Slope  10°  20°  30°  40°
Turning Radius ≥10D ≥7D
Drive Type Two Wheels Driven  Four Wheels Driven
Full charge exposure  40min 60min 90min
Crawling Speed  15m/min 18m/min
Suitable X-ray Generator 1005L 1005;1605 1605; 2005; 2505 2005; 2505; 3005

X-RAY Generator

Model 1005L 1005 1605 2005 2505  3005
Max. Penetrate 8mm 10mm 15mm  30mm 35mm 35mm
Min Diameter  125mm 219mm 273mm 323mm 457mm 500mm
Generator Dimension 125*940mm 170*870mm 200*900mm 245*910mm 290*970mm 310*1070mm
Generator Weight 14kg 14kg 18kg 23kg 33kg 39kg
Generator Voltage 100kV 100kV 60-160kV 100-200kV 150-250kV 200-300kV
Focus Size 1.0*2.5mm 1.0*2.5mm 1.0*3.5mm 1.0*3.5mm 1.0*5.0mm 1.0*6.0mm
Radiation Angle 360° x 40°
Exposure Time 0-5min
Anode Target Cone target
Operate Temp. -20~+75°C
Insulation  SF6
Available Humidity  ≤90%
                                          
Phased Array Ultrasonic Flaw Detector CTS-602    
Features:
1. Clear Image
2. Linear Imaging
3. Sector Imaging
4. Accurate Flaw Position and Size
5. Ultrasonic Imaging and A-scan Display
Function:
1. Easy operation and user-friendly interface.
2. Conventional and phased array modes are available in the same system, which is convenient for inspectors' testing and evaluation.
3. Up to 32 channels, compatible with 16/32/64/128-element probes.
4. Bi-polar square wave transmission and adjustable transmission pulse width.
5. Transmit single-point focusing and receive dynamic focusing.
6. Featured with linear scanning, fixed-angle linear scanning and sector scanning.
7. A VGA monitor or projector can be connected via the VGA port, good for promotion, demonstration and multi-media teaching for flaw detection training course.
8. Files saved in the system can be exported to a computer for creating reports
via the USB port.

Phased Array Image Example:
0°Linear Scan (Longitudinal wave) -45°~ 45°Sector Scan (Longitudinal wave)
Technical Specifications:
Function Conventional Phased Array
System Bandwidth (-6dB) 0.5~15MHz 1-10MHz
A/D Sampling Frequency Max 240MHz 120MHz
Probe Connector 2, BNC or Lemo Connectors 1, for supporting 16/32/64/128 elements probes, featured with auto recognition
Active Aperture ------ 2-32, the upper limit depend on the probe element number
Pulse Generator Type: Negative Spike Pulse; Voltage: approx 370V; Frequency: 20-500Hz; Power: Low/High Type: Bipolar Square Wave Pulse; Transmit Voltage: 20~150V, Step:10V; Pulse Width: 40~500ns, Step: 20ns; Frequency: 100-8KHz; Transmit Delay: 0-20µs; Resolution: 5ns
Receiver Gain: 0-110dB, Step: 0.5/1/2/6/12; Frequency Band (-6dB):1~4MHz/0.5~15MHz; Damping: Low/High; Rectify: Positive, Negative, Full, Filter, RF Gain: 0-80dB; Frequency Band (-6dB):1~10MHz; Delay: 0~20µs; Resolution: 3.125ns.
Focus ------ Transmit: Single focus; Receive: 160MHz hardware real time dynamic focus; Max Range: 1008 focus points per scan line. 
Filter Auto adjustment based on operating frequency band Auto adjustment based on probe frequency
Scan Type ------ Linear/Sector/C/D scan
Scan Line ------ Linear Scan: Max 256 lines; Sector: Max 128 Lines
Scan Angle Range ------ Linear: -45°~+45°; Sector: -80°~+80°
Scan Range 0-6000mm (steel longitudinal wave), continuous and adjustable, Min Display Range: 10mm 0~1000mm (steel longitudinal wave)
Material Velocity 1000~10000m/s 1000~10000m/s
Display Delay -100~1000mm (steel longitudinal wave) 0~1000mm (steel longitudinal wave)
Probe Zero 0~200µs ------
Reject 0~80 Linear Reject ------
Curve Function DAC ------
Auxiliary Function A-Scan echo freeze; auto calibration; angle measurement; peak value memory; parameter output; AWS D1.1/D1.5; USB disc storage ------
Alarm Signal Sound and Light alarm (build in buzzer and panel LED)
Test Point Selection Peak Value, Front, J-Front Peak Value
Unit mm/inch mm/inch
Measurement 2 Gates: it can measure echo amplitude, sound path, horizontal distance, vertical distance and distance between 2 gates 2 Gates: it can measure echo amplitude, sound path, horizontal distance, vertical distance and distance between 2 gates; 2 measurements cursors: it can measure horizontal and vertical position and distance between cursors on the image
Horizontal Linearity «0.5% ------
Vertical Linearity «3% ------
Attenuator Error 12dB ± 1dB ------
Dynamic Range »30dB ------
Far field resolution »26dB ------
Electric Noise Level in initial state, when the detection range and gain are set to maximum, it is «20 (Frequency band 1-4MHz)   ------
EN Norm EN-12668-1 compliant ------
                                          
Digital Corrosion Tester AMT810E    
Introduction:
AMT810E Portable Fast Electrochemical Corrosion Meter is a simple operation instrument that integrates the Electrochemical Impedance Spectroscopy (EIS) measuring principle and is portable designed for fast measurements and directly display results. EIS measurement is employed to measure the solution resistance (Rs) and the polarization resistance (Rp) and further to calculate the corrosion rate.
Applications:
1. Corrosion rate monitor and corrosion inhibitor selection in the petroleum and chemical industry and road and bridge construction site.
2. Metal corrosion rate monitor in oil wastewater, soil, concrete and so on to evaluate corrosion protection countermeasures.
Specifications:
1. Probe channels: 1
2. Input impedance: 1011Ω
3. Potential range: ±2.5V
4. Potential resolution: 0.1mV
5. Rs range: 10Ω~500KΩ
6. Rp range: 5Ω~10MΩ
7. Corrosion rate: 0.1um ~ 10mm/a
8. Absolute Measurement Accuracy: <±1%
9. Sine wave amplitude: 1~100mV
10.Sine wave frequency: 10KHz~0.001Hz
11.Timing interval: 1~255h
12.Data storage: 10,000
13.Clock error: ±1min/month
14.Power: AC 220V/DC 1.5V(4 AA cell)
15.Dimensions: 260x165x20mm,Weight:3.5Kg
16.Temperature: -10~50
ºC, relative humidity:<80%, away from corrosive gas

              
XS-100 Rebar Corrosion Detection            
Features:
1. Easy to operate, fast and accurate read. The result is displayed with numbers or graphics.
2. Displays rebar corrosion degree with 9-level grey or colorful graphics
3. Measured data is inputted to PC software from USB interface.
4. Easy to operate, have concise software interface, have powerful analytical processing, can obtain testing report directly.
Brief introduction
XS-100 rebar corrosion detection is NDT instrument which tests rebar corrosion in the concrete structure. Using electrochemistry method, do the functions for corrosion detection, data analysis, storage and output etc. It is a detection instrument which is handed, measurement accurately and easy to use.
SPECIFICATIONS:
1. Potential electrode: Φ37X127mm
2. Electrode weight: 200g
3. Power supply: Alkaline cell X 6
4. Potential measurement range: ±1000mv
5. Test Accuracy: 1mv
6. Distance of test point: 0~1000mm
7. Data storage capacity: 50000 test points, 5000 test areas
8. Usage temperature range: -10℃ ~ 40℃
9. Size: 220*145*60mm