arbor press 

Arbor Press is a good machine for pressing working, bending and machine disassembing. 

  • Heavy Stub Teeth
  • Heavy Castings
  • Precision Made
  • 4-Position Anvil
  • Steel Rams
  • Steel Pinions 
Standard Arbor Press Arbor Press with Ratchet Wheel
Standard Arbor Press
Specification 180-0001 180-0002 180-0003 180-0004 180-0005
Capacity 0.5T 1T 2T 3T 5T
Pressure (KN) 5 10 20 30 50
Opening (mm) 90 110 180 285 430
N.W.(kg) 9.5 15.5 37.5 67 154
Arbor Press with Ratchet Wheel
Specification 180-0006 180-0007 180-0008 180-0009
Capacity 2T 3T 3TA 5T
Pressure (KN) 20 30 30 50
Opening (mm) 180 280 285 450
N.W.(kg) 43.5 58 63 175

 

3. Power Feed
Model AL-310SX AL-410SX AL-510SX
Axes: X
Model AL-310SY AL-410SY AL-510SY
Axes: Y
Model AL-310SZ AL-410SZ AL-510SZ
Axes: Z
Voltage: 110/220V; 50/60HZ
RPM: 0-200
Torque: Max 450 in-lb Max 550 in-lb Max 650 in-lb
G.W./N.W.:

6.5/5.8Kg

Low Noise, Table Feed for most mill & drill machine, With Rapid Speed, Limit switch for sensitive stops, Auto shut off at end of cut, Parts can exchange with other products.

 

4. 3 in 1 Combination of Shear, Brake & Rolls

  • Removable male dies with female dies.
  • Micro adjustable set back Gauge standard equipment.
  • One piece 24” two position handle.
Specification 180-0012 180-0024 180-0030 180-0040 180-0052
Width 12" 24" 30" 40" 52"
Rolling Dia. 1-1/2" 1-1/2" 1-1/2" 1-1/2" 2"
Weight 115LBS 264LBS 285LBS 570LBS 680LBS

5. Precision Foot Shears

Specification 180-0101 180-0102
Capacity: 16gage 37" 52"
Range back gage 30-3/4"
Range front gage 35" 37-1/2"
N.W.: 775LBS 1030LBS

6. Hand Shear 96"

Order No.: 180-0103

7. Bending Brakes 24"

Order No.: 180-0104

8. Universal Brakes

Order No.: 180-0105

 

9. Pan & Box Brake 180-0106

 

 

 

 

10. 7-1/2" mini shear Brake 180-0107

11. Sheet Metal Pan & Box Brake

Specifications

180-0108 180-0109
Capacity Mild Steel 22 gage 16 gage
Stainless Steel 26 gage 20 gage
Max Beam Lift 7/8" 1-1/4"
Max Bend Length 48-1/4"
Min Reverse Bend 5/16"
Finger Width 2",3",4"
Number of Fingers 16
Max Box Depth 3"
Beam Adjustment 0-1/8" 0-5/8"

12. Bending Brakes

    Specifications 180-0110 180-0111
Width 41" 42"
Capacity 18 Gage
Weight 205LBS 209LBS
Dimension 54"x40"x38-1/2" 51-1/2"x38-1/2"x30-1/2"

13. 48" Hand Brake Model: 180-0112

13. Hand Notcher: 180-0113

  • Material Capacity: 16 Gauge
  • Capacity: 4 Ton
  • Notch: 6 x 6 x 90°
  • Stroke:  3/4"
  • Table Dimension: 12 x 18"
  • Weight: 210 lbs
  • Height (less handle): 18-1/2"

Heavy duty notcher cuts all shearable material with ease: steel, aluminum, plastic and rubber.  Includes 1/2"x1/8" ground table wit front gages. The gages offer a full 6 inches of surface allowing for easy and accurate squaring. Reversible upper blades for both splay and pierce cutting.

14. Steel Tube and Pipe Notchers Model: 180-0114

  • Notches, capes, or saddles any pipe or tube up to 2" in diameter, round or square. 
  • Easy set-up for angles to 45°. 
  • Uses all standard hole saws up to 3" with either a 1/2-20 or 5/8-18 thread mount. 
  • 1/2"diameter drive shaft for use with any 1/2" capacity drill motor.
  • Made of heavy plated chrome steel. 
  • The pipe clamp has a black oxide finish. 
  • 5-1/4 x 3 mounting plate with 3-1/4" drilled holes.
  • Weight 9lbs.
  • Hole saw not included.

 

15. Mini Sheet Metal Cutter Model: 180-0115

  • For use on mild steel, 16gage capacity.
  • Adjustable rollers can be used for straight or curved cuts.
  • 2" throat, can be mounted to work bench or held in a vise.
  • 3" X 2-1/2" base with 2 mounting holes.
  • 11" Handle.
  • 4-3/4"overall height (less handle)
     

16. Gear Driven Ring Roller Model: 180-0116

  • Precision, high quality machined roller forms rings out of not rolled flat stock
  • Metal sizes 3/16" x 1"and up to 1/4" roud, Create rings from 3"diameter to as large as you need.
  • All surface are heat-treated and hardened for long life.
  • Create chandelle, plant Holders, ornamental iron work and more.

17. Rotary Machine Model: 180-0117

  • Performs burring, edging, elbowing, flanging, flattening and turning.

  • Long throat makes unit highly versatile.

  • Includes 6 rolls: 2 turning, 1 each of burring, wiring,  crimping, and ogee bead.

  • Standard clamp for table mount operation.

  • Cutting Capacity: 22 Gage
    Distance Between Shaft Centers: 2"(50.8mm)
    Depth of Throat to Frame: 7"(175mm)
    Net Weight: 64 Lbs(29 Kgs)
    Gross Weight: 71 Lbs(32 Kgs)
    Overall Dimension (L x W x H) 16" x 8" x 16" (458 x 203 x 406mm)