counter meters

1. Model JL-645 Serials

Working principle & Introduction: JL645 counter is a kind of general 5 digits pulling mechanical counter f, it is used to record the accumulative times of the mechanical reciprocating movement. It has no reset resign. When the counter times reach to 99999, re-counting can restart from 00000. Its counting wheels are driven by inside pinions. When the arm of the counter is pulled, the driving mechanism connected to arm will make the counter carry out addition counting. This kind of counter is mainly used in the industries such as high-voltage switch, testing equipment and printing equipment etc.

 

Technical parameters:

Display digit size: H×W:4mm×2mm
Max. capacity of accumulative counting: 99999
Counting speed: 300times/min
Transmission ratio: 1:1
Operating ambient temperature: -10℃~+50℃
Operating ambient relative humidity: ≤85%
Torque: ≤1N·cm
Pulling angle: Min. :37° , Max.:49°

2. Model JL-043 Serials

Product introduction:

 

Model JL043 3-digits pulling counter is used to record the accumulative times of the mechanical stroke movement. Left shaft with reset button.

 

Other description:

Displayed digit size: H x W, 4 x 2mm;  Install Size:36 x 23mm

Max. calculation capacity: 999

Transmission ratio: 1:1

Counting speed: < 300 times/minute

Torque: 4.18 Ncm

Weight: 44g

3. Model JL-045 serials

Product introduction:

 

Model JL045 5-digits pulling counter is used to record the accumulative times of the mechanical stroke movement. It has no reset mechanism. When the full counting 99999 is completed, recounting can start from 00000. Its counting wheels are driven by inside pinions. When the arm on the right side of the counter is pulled, the driving mechanism connected to the arm will make the counter to carry out adding counting. It is mainly applied in high-voltage switch and circuit breaker, and it can also be applied in testing equipments, printing equipments etc. We also have left shaft model.

 

Other description:

Displayed digit size: H x W, 4 x 2 (mm)

Max. calculation capacity: 99999

Transmission ratio: 1:1

Counting speed: < 300 times/minute

Torque: 4.18 Ncm

Weight: 23g

 

4. Model JL055 Serials

Model JL055 serials 5-digits pulling counter is used to record the time of the mechanical stroke movement. When the arm on the right side of the counter is pulled, the pushing plate connected to the arm will push the pinions on the number wheels to carry out decimal adding counting. It is mainly applied in machinery, printing, high & low-voltage switch etc.
 
Description:
Displayed digit size: H x W, 4 x 2 (mm)
Max. capacity: 99999
Transmission ratio: 1:1
Counting speed: < 250 times/minute
Torque: 8 Ncm
Weight: 72g
 
JL055 we have follow models:
JL055B   : this model is for hand use, with a ring in the back.
JL055B-A : this model have installing base. 
JL055B-I : this model is no reset button.

5. JZ095 Serials

Product introduction:

The model JZ095 counter is used to measure rotation speed of various machinery and the length, flow amount of finished products and to measure the depth and height etc. It is widely applied in machinery, metallurgy, light industry and printing & dyeing etc. It is a necessary tool for measuring and recording.

 

Other description:

1) Display digit size: H x W: 6.5 x 3.8mm

2) Max. capacity of accumulative counting: 999999

3) Rated rotation speed: 

   1:1  3000r/min   

   2:10   600r/min

   1:10   300r/min

4) Torque: 1Ncm

5) Weight:  380g

6) Order No.: 

   JZ095B-1:  one side axes, ratio: 1:1

   JZ095B-2:  one side axes, ratio: 2:10

   JZ095B-3:  one side axes, ratio: 1:10

   JZ095M-1:  two side axes, ratio: 1:1

   JZ095M-2:  two side axes, ratio: 2:10

   JZ095M-3:  two side axes, ratio: 1:10

6. J114 serials

The model J114 serials counters are used to count accumulative times of the stroke movements of machinery or instruments. The pulling counting can be carried out so long as the pulling arm of the input axis of the counter is connected to instruments or machines. Direct reading of the digit indication with rotation reset. Accumulative counting can be started from zero again after reset. The model J114 serials counters are mainly applied in textile, machinery, instruments and mines etc.  

For J114 serials, we have follows models:

Description:

Digit size: 4.4 x 3mm

Size: 55 x 48 x 32mm

Transmission ratio: 1:1

Torque: 8 Ncm

Speed: 500 times/min.

Weight: 80g

J114

J114-6

J114B

J114D

7. J116 Serials

Product introduction:

The model J116-001 counter is a kind of mechanical rotation counter. Driving the active axis, the internal gears mechanism drives the counting wheel to carry out the decimal adding counting, the counting value is added 1, when the active axis rotates one round anticlockwise. Pressing of the reset button can reset the number of the counting wheel simultaneously. The figure of the counting wheel can be used to measure the rotation speed of various machinery and to measure length, depth and flow amount etc., and it is widely applied in machinery, wire-making, tape-making and printing etc., it is therefore a necessary tool for measuring and recording.

 

Other description:

Display digit size: H x W: 4 x 2.5mm

Max. capacity of accumulative counting: 999999

Rated rotation speed: 1000r/min.

Torque: 3 Ncm

Weight: ca. 70g

 

8. J250 Serials

Product introduction:

The model J250 counter is mainly divided into two categories of rotation and pulling, it is suitable for controlling the rotation or stroke of machines or instruments. Pushing down the left button of the counter, the required values can be input into the counter by pressing the rest 5 buttons in sequence, now loose the left button and the counter will indicate the selected values. When the movement of machines transmits the torque through connected parts to the input axis of the counter, the internal gear mechanism of the counter will drive the number wheels to rotate at the specified transmission ratio, and a signal will be sent out from the counter as soon as the times of the rotation conform to the preset values, and through the relay set on the machine the operation mechanism on the machine will be braked, so fulfilling the quantity control. After the whole action is finished, pushing the left reset button can make the number wheels resume the previously selected values, meanwhile the signal sent out by the counter is stopped. The model J250 is widely applied in printing, textile, dyeing, cable-making, communication, military industry, light industry and machinery industry etc. It can be used singly as well as be matched with measuring instruments and modern control equipments to realize the function of quantity control.

 

Other description:

Display digit size: H x W: 6.5 x 5.6mm

Max. capacity of accumulative counting: 99999

Transmission ratio: 1:1

 

Speed:

  • J250-0013000r/min (TOP GOING,Rotation)

  • J250-0023000r/min (TOP COMING,Rotation)

  • J250-1011500r/min (TOP GOING,Rotation)

  • J250-1021500r/min (TOP COMING,Rotation)

  • J250-2011500r/min (TOP GOING,Rotation)

  • J250-2021500r/min (TOP COMING,Rotation)

  • J250-301240r/min  (TOP GOING,Pulling)

  • J250-302240r/min  (TOP COMING,Pulling)

Torque:

  • J250-001, J250-0021.8Ncm

  • J250-101, J250-1023Ncm

  • J250-201, J250-2023Ncm

  • J250-301, J250-30210Ncm

 

Preset: Press the reset key, then press the other five keys respectively.

The load of output signal: Max. voltage 250V, Max. current 2A

Power: <50W

Weight: ca. 800g

 

9. JQ014 serials

 

Product introduction:

Model JQ014 4-digits push counter is used to record the quantity, it is widely used in station, works, school, airport, store, garden ect.

Other description:

Max. calculation capacity: 9999

Transmission ratio: 1:1

Counting speed: < 300 times/minute

Torque: 4.18 Ncm

weight: 32g

this model has follows items:

1). JQ014A----- steel cover with electroplated
2). JQ014A-B--- steel cover with electroplated, with base
3). JQ014A-C--- stainless steel cover, without base
4). JQ014------ plastic cover (all colours)

 

 

 

10. JQ015 Counter with Compass

 

Product introduction:

This model counter is used to record the quantity, it is widely used in station, works, school, airport, store, garden Muslim Holy Words Counting ect.

Other description:

Max. calculation capacity: 99999

Transmission ratio: 1:1

Counting speed: < 300 times/minute

Torque: 4.18 Ncm

weight: 47g

 

 

11. Counter Meter for Fishing F03

  • 3 digit and reading by meter, from 000-999 meters
  • Full sealed, stainless steel parts
  • with reset button
  • Adjustable clip and easy to operate, can clip anywhere of the fishing rods.

12. J114U Counter Meter  

  • 5 digit max 99999
  • Size similar as J114
  • with up reset button

 

13. Speed Counter Meter 2 axles

  • 5 digit with 2 direction
  • Size similar as J114
  • with reset button

14. Speed Counter Meter 1 axles

  • 5 digit
  • Size similar as J114
  • with reset button

 

15. Model 404 Serials

Product introduction:

It is used to record the accumulative times of electrical signal, and it has push-reset mechanism. It can be used for counting with interval reset, such as statistic counting, mechanical rotation counting, money counting, flow amount counting and group selection counting etc. It is widely applied in the industries such as printing, textile, printing & dyeing, machinery and high voltage cabinet etc.

Other description:

Display digit size: H x W: 4 x 1.8mm

Max. capacity of accumulative counting: 999999

Voltage kind: DC12-220V; AC24-220V

Counting speed: DC, 25times/sec.; AC, 10times/sec.

Power: AC, 4.0VA; DC, 2.75W

Ambient temperature: -10C - +50C

Relative humidity: <85%

Weight: ca. 170g

 

 

16. Model 422 Serials

Operating principle and application

It will send out signal, when the operation of counter reaches the preset figures, so it can be used for automatic control, such as switching the machines, pre-selecting the number of pieces and indicating the work amount. It is widely applied in printing, textile, dyeing and machinery industry etc.

Main technical data

Displayed digit size

H × W, 4 × 1.8(mm)

Max capacity of accumulative counting

999999

Kind of voltage

DC12220V; AC24220V

Counting speed

DC, 25cps; AC, 10cps

Power

AC, 4.0VA; DC, 3.75W

Ambient temperature

-10℃~+50

Relative humidity

85%

Weight

ca.270g

17. Model 875/876 Serials

Product introduction:

It is used to record the accumulative times of electrical signals, and it has no reset mechanism, it is mainly applied in copy machines, and it is also widely applied in petrol, chemistry, mines, national defense, foodstuff and printing industry etc. for counting of various electrical pulses, together with other meters it can form a digital display instrument.

Other description:

Display digit size: H x W: 4 x 2mm

Max. capacity of accumulative counting: 999999

Voltage kind: DC 12-220V; AC24-220V

Counting speed: DC 20 times/sec.; AC 10 times/sec.

Power: AC 2.5VA; DC 1.5W

Ambient temperature: -10- +50

Relative humidity: < 85%

Weight: ca. 70g

Also 5 digit is available and model number is 875

  • Model 875 is 5 digit with reset button
  • Model 876 is 6 digit without the reset button.

 

18. Wheel Counter serials

Product introduction:
These counter meter are mainly used for measuring length, it is widely used in textile, printing and dying, paper, vinyl, artificial leather ect.
Turned the button on the side to adjust the digit to zero, easily used and accurate, It can work from the temperature –20 to +60 degree.
Diameter of wheels: 1m 106.2 +-0.05mm
Also yard is available. 
MODEL: 
Z94F:  STEEL COVER & WHEEL, FIRST DIGIT SHOW 1M,(3circle/M).
JM325: PLASTIC COVER & WHEEL, FIRST DIGIT SHOW 10CM,(3circle/M), Steel wheel available.
Z96F: Steel Cover, direction same with wheel. 0-99999M
JM316: Direction Same With Wheel, 6 digit, 0-999999M.

Z94F

                    JM325

 Z96F

 JM316

 

 

19. Model J981 serials

Product introduction:
J981 one wheel walking meter is a widely used measuring meter, it is mainly to measure the length of road, land ect.
This model has five digit, can measuring 1-9999.9 meters. the aluminum handle can pull out and up to 90cm, with fine lock.

 

20. JC316 Serials

JC316 is a recorder of way and length. Especially it is applied on the way of turn up and down. It is a facile tool for measuring and recording.
Also with Brake, model number is JC316A, the brake can easily uninstall if no need.
Specification
1. Max counting capacity: 99999.9
2. Max counting speed: 360RPM
3. Environmental temperature: -15ºC-+55ºC
4. Precision of measurement:»99%

21. JC326 Serials

JC326 is similar as JC316, a recorder of way and length. It has 2 samll wheels.
Specification
1. Max counting capacity: 99999.9
2. Max counting speed: 360RPM
3. Environmental temperature: -15ºC-+55ºC
4. Precision of measurement:»99%

22. MW318 Serials

MW318 is designed based on JC316, with a gun handle brake.
Specification
1. Max counting capacity: 99999.9
2. Max counting speed: 360RPM
3. Environmental temperature: -15ºC-+55ºC
4. Precision of measurement:»99%

23. MW319 Serials

MW319 is similar as J981, with a stand now.
Specification
1. Max counting capacity: 99999.9
2. Max counting speed: 360RPM
3. Environmental temperature: -15ºC-+55ºC
4. Precision of measurement:»99%

24. Digital Measuring Wheels MW100      Manual

  • Measures up to 99,999.9 Meters/Feet/Yards
  • Bright Orange “Safety” Colour
  • 99.9% Measuring Accuracy
  • Large LCD display for easy reading
  • Handy Start/Stop Mode (prevents accidental measurements)
  • "Smart Wheel" (automatically includes wheel radius for accurate wall-to-wall measurements)
  • Units conversion: Meters/Feet/Yards
  • Auto power off after 3 minutes

Specifications:
*Wheel size: 0.314 meter(12-23/64") circumference; 0.1 meter(3-15/16") diameter
*Measure range: 99,999.9 meters/feet/yards
*Wheel Accuracy: 99.9%
*Wheel Composition: High-impact plastic; TPE rubber tire
*Maximum Speed: 13Km/h
*Product Weight: 0.5kgs
*Length (extended): 1100mm
*Length (contracted): 520mm
*Power: 4 x AAA Duracell batteries
*Battery Life: Approx.400+ hours of actual usage
*Auto Shut-off: 3 min.
*Keypad: 5 keys
*Operating Temperature: 14-140˚ F (-10-60˚ C)
*Display Type: LCD segment; 6 digits (up to 99,999.9)*Accuracy: 99.9% measuring accuracy

25. Digital Measuring Wheels MW200       Manual

  • Measures up to 999,999.9 Meters/Feet/Yards
  • Bright Orange “Safety” Colour
  • 99.9% Measuring Accuracy
  • Large LCD display for easy reading
  • Control Panel Located Near Handle (so you don’t have to stoop over to read it)
  • Display backlight (for use in darkness)
  • Handy Start/Stop Mode (prevents accidental measurements)
  • "Smart Wheel" (automatically includes wheel radius for accurate wall-to-wall measurements)
  • Area or Volume can be automatic computed by Calculator in sets
  • Units conversion: Meters/Feet/Yards
  • Auto power off after 3 minutes

Specifications:
*Wheel size: 0.314 meter (12-23/64") circumference; 0.1 meter (3-15/16") diameter
*Measure range: 999,999.9 meters/feet/yards
*Wheel Accuracy: 99.9%
*Wheel Composition: High-impact plastic; TPE rubber tire
*Maximum Speed: 13Km/h
*Product Weight: 1.2kgs
*Length (extended): 1009mm
*Length (contracted): 620mm
*Power: 4 x AAA Duracell batteries
*Battery Life: Approx. 400+ hours of actual usage
*Auto Shut-off: 3 min.
*Keypad: 12 keys
*Operating Temperature: 14-140 ˚F (-10-60 ˚C)
*Display Type: LCD segment; 6 digits (up to 99,999.9)
*Accuracy: 99.9% measuring accuracy

26. Digital Measuring Wheels MW300       Manual

  • Measures up to 999,999.9 Meters/Feet/Yards
  • Bright Orange "Safety" Colour
  • 99.9% Measuring Accuracy
  • Large LCD display for easy reading
  • Control Panel Located Near Handle (so you don’t have to stoop over to read it)
  • Display backlight (for use in darkness)
  • Handy Start/Stop Mode (prevents accidental measurements)
  • "Smart Wheel" (automatically includes wheel radius for accurate wall-to-wall measurements)
  • Area or Volume can be automatic computed by Calculator in sets
  • Units conversion: Meters/Feet/Yards
  • Auto power off after 3 minutes

Specifications
*Wheel size: 1 meter (39-3/8") circumference; 0.318 meter (12-9/16") diameter
*Measure range: 999,999.9 meters/feet/yards
*Wheel Accuracy: 99.9%
*Wheel Composition: High-impact plastic; TPE rubber tire
*Maximum Speed: 13Km/h
*Product Weight: 1.8kgs
*Length (extended): 1122mm
*Length (contracted): 620mm
*Power: 4 x AAA Duracell batteries
*Battery Life: Approx. 400+ hours of actual usage
*Auto Shut-off: 3 min.
*Keypad: 12 keys
*Operating Temperature: 14-140 F (-10-60 C)
*Display Type: LCD segment; 6 digits (up to 99,999.9)
*Accuracy: 99.9% measuring accuracy

 

27. Measuring Wheels MW012

Specification
1. Max counting capacity: 0-9999.9M/0-9999.9FEET
2. Folding handle: 60cm/116cm
3. Trigger Brake
4. 12" wheel and Kick Stand

 

28. Measuring Wheels MW008

Specification (5 Digit)
1. Max counting capacity: 0-9999.9M/0-9999.11FEET
2. Telescoping handle: 56cm/115cm
3. Zero point indicator
4. 8" wheel

 

29. Measuring Wheels MW004

Specification (5 Digit)
1. Max counting capacity: 0-9999.9M/0-9999.11FEET
2. Telescoping handle: 51cm/113cm
3. Hang Hole
4. 4" wheel